Surface free energy of composite materials with high calcium carbonate filler content

A. Rudawska; P. Jakubowska; A. Kloziński

doi:10.14314/polimery.2017.434

Published : 2021-01-15

Vol. 62 No. 6 (2017)

Surface free energy of composite materials with high calcium carbonate filler content

A. Rudawska P. Jakubowska A. Kloziński

DOI: https://doi.org/10.14314/polimery.2017.434

Abstract

The adhesive properties of ternary composites based on middle density polyethylene (PE-MD) and isotactic polypropylene (i-PP) with high content (48–64 wt %) of inorganic fillers were studied. As fillers two kinds of calcium carbonate were used. Two fillers differed in their fineness degree and one of them had also stearic acid modified surface. It was stated that the kind and amount of filler affect mean value and scatter of surface free energy (γS) as well as its polar and dispersive components. More stable adhesive properties were observed for composites with stearic acid modified filler.

Keywords

polymer composites ; polyethylene ; polypropylene ; calcium carbonate ; surface free energy ; adhesive properties kompozyty polimerowe ; polietylen ; polipropylen ; węglan wapnia ; energia powierzchniowa ; właściwości adhezyjne

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Rudawska, A., Jakubowska, P., & Kloziński, A. (2021). Surface free energy of composite materials with high calcium carbonate filler content. Polimery, 62(6), 434-440. https://doi.org/10.14314/polimery.2017.434

References

Jakubowska P., Kloziński A.: Przetwórstwo Tworzyw 2012, 150, 573.

[2] Żenkiewicz M.: Polimery 2006, 51, 584.

[3] Żenkiewicz M.: Polimery 2007, 52, 760.

[4] Stepczyńska M., Żenkiewicz M.: Polimery 2014, 59, 220
Crossref

[5] Samujło B., Rudawska A.: Polimery 2010, 55, 846.

[6] Rudawska A., Bociąga E., Olewnik-Kruszkowska E.: Journal of Adhesion Science and Technology 2016, 31, 327
Crossref

[7] Awaja F., Gilbert M., Kelly G. et al.: Progress in Polymer Science 2009, 34, 948
Crossref

[8] Baldan A.: International Journal of Adhesion and Adhesives 2012, 38, 95
Crossref

[9] Rana S., Cho J.W., Park J.-S.: Journal of Applied Polymer Science 2013, 127, 2670
Crossref

[10] Andrzejewska E., Marcinkowska A., Prządka D. et al.: Polimery 2013, 58, 794
Crossref

[11] Barczewski M., Czarnecka-Komorowska D., Andrzejewski J. et al.: Polimery 2013, 58, 805
Crossref

[12] Zajchowski S., Ryszkowska J.: Polimery 2009, 54, 674.

[13] Elleithy R.H., Ali I., Alhaj Ali M., Al-Zahrani S.M.: Journal of Applied Polymer Science 2010, 117, 2413
Crossref

[14] Supaphol P., Harnsiri W.: Journal of Applied Polymer Science 2006, 100, 4515
Crossref

[15] Samsudin M.S.F., Ishak Z.A.M., Jikan S.S. et al.: Journal of Applied Polymer Science 2006, 102, 5421
Crossref

[16] Liang J.-Z.: Composites: Part B 2013, 51, 224
Crossref

[17] Han S.H., Oh H.J., Lee H.C., Kim S.S.: Composites: Part B 2013, 45, 172
Crossref

[18] Jin F.L., Park S.-J.: Polymer Degradation and Stability 2012, 97, 2148
Crossref

[19] Morel F., Bounor-Legaré V., Espuche E. et al.: European Polymer Journal 2012, 48, 919
Crossref

[20] Chen J., Liu T., Yuan W.-K., Zhao L.: The Journal of Supercritical Fluids 2013, 77, 33
Crossref

[21] Wu W., Lu S.-C.: Powder Technology 2003, 137, 41
Crossref

[22] Hamdani S., Longuet C., Lopez-Cuesta J.-M., Ganachaud F.: Polymer Degradation and Stability 2010, 95, 1911
Crossref

[23] Krämer R.H., Raza M.A., Gedde U.W.: Polymer Degradation and Stability 2007, 92, 1795
Crossref

[24] “Particulate-filled polymer composites” (Ed. Rothon R.), Longman Scientific & Technical, UK 1995.

[25] Sahebian S., Zebarjad S.M., Vahdati Khaki J., Sajjadi S.A.: Journal of Materials Processing Technology 2009, 209, 1310
Crossref

[26] Spanos N., Koutsoukos P.G.: Journal of Crystal Growth 1998, 191, 783
Crossref

[27] Xiang L., Xiang Y., Wang Z.G., Jin Y.: Powder Technology 2002, 126, 129
Crossref

[28] Fu Q., Wang G., Liu Ch.: Polymer 1995, 36, 2397
Crossref

[29] Kwon S., Kim K.J., Kim H. et al.: Polymer 2002, 43, 6901.
Crossref

[30] Liu Z.H., Zhu G., Li Q. et al.: Polymer 1998, 39, 1863
Crossref

[31] Ghalia M.A., Hassan A., Yussuf A.: Journal of Applied Polymer Science 2011, 121, 2413
Crossref

[32] Mantia F.P.L., Morreale M., Scaffaro R., Tulone S.: Journal of Applied Polymer Science 2013, 127, 2544
Crossref

[33] DeArmitt Ch., Breese K.D.: Plastics, Additives and Compounding 2001, 3, 28
Crossref

[34] González J., Albano C., Ichazo M., Diaz B.: European Polymer Journal 2002, 38, 2465
Crossref

[35] Gościański M., Maciejewski H., Guliński J., Leda H.: Polimery 2004, 49, 15.

[36] Zuiderduin W.C.J., Westzaan C., Huétink J., Gaymans R.J.: Polymer 2002, 44, 261
Crossref

[37] Bellayer S., Tavard E., Duquesne S. et al.: Polymer Degradation and Stability 2009, 94, 797
Crossref

[38] Yang Y.L., G’Sell Ch., Hiver J.M., Bai S.L.: Journal of Applied Polymer Science 2007, 103, 3907
Crossref

[39] Jakubowska P., Sterzyński T., Samujło B.: Polimery 2010, 55, 379.

[40] Rudawska A., Jacniacka E.: International Journal of Adhesion and Adhesives 2009, 29, 451
Crossref

[41] Rudawska A.: Journal of Adhesion Science and Technology 2012, 26, 1233.

[42] Rudawska A.: Polimery 2008, 53, 452.

[43] Rudawska A., Danczak I., Muller M., Valasek P.: International Journal of Adhesion and Adhesives 2016, 70, 176.
Crossref

[44] Krysicki W. et al.: „Rachunek prawdopodobieństwa i statystyka matematyczna w zadaniach”, Cz. II. „Statystyka matematyczna”, PWN, Warszawa 1999.

Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 257

PDF Downloads : 126

A. Rudawska a.rudawska@pollub.pl

Affiliation
Lublin University of Technology, Department of Production Engineering, Nadbystrzycka 36, 20-618 Lublin, Poland

P. Jakubowska

Affiliation
Poznan University of Technology, Institute of Chemical Engineering and Technology, Berdychowo 4, 60-965 Poznan, Poland

A. Kloziński

Affiliation
Poznan University of Technology, Institute of Chemical Engineering and Technology, Berdychowo 4, 60-965 Poznan, Poland