Biodegradable polymer composites used in rapid prototyping technology by Melt Extrusion Polymers (MEP)

Katarzyna Bulanda; Mariusz Oleksy; Rafał Oliwa; Grzegorz Budzik; Łukasz Przeszłowski; Aleksander Mazurkow

doi:10.14314/polimery.2020.6.2

Published : 2020-12-16

Vol. 65 No. 6 (2020)

Biodegradable polymer composites used in rapid prototyping technology by Melt Extrusion Polymers (MEP)

Katarzyna Bulanda Mariusz Oleksy Rafał Oliwa Grzegorz Budzik Łukasz Przeszłowski Aleksander Mazurkow

DOI: https://doi.org/10.14314/polimery.2020.6.2

Abstract

Appropriate selection of polymeric materials enables their wide application not only in machine construction elements, suspension and interior equipment of vehicles. Simultaneously with the development of new polymer materials, the processes of their processing developed. This also applies to incremental technologies. Rapid prototyping methods using 3D printers are largely based on various types of polymer materials. Currently, 3D printing is a well-known technique for producing functional elements, especially the Melt Extrusion Polymers (MEP) method, which is the oldest of the known techniques of spatial production. The main reason of the technology is designing and then manufacturing parts for many fields, including engineering, medicine, as well as the automotive and aviation industries. The article is a review of the literature on the use of composites based on thermoplastic polymers to develop new polymer materials used for 3D printing by MEP.

Keywords

Melt Extrusion Polymers (MEP) ; polymer materials ; polymer composites ; 3D printing ; filler Melt Extrusion Polymers (MEP) ; materiały polimerowe ; kompozyty polimerowe ; drukowanie 3D ; napełniacz

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Bulanda, K., Oleksy, M., Oliwa, R., Budzik, G., Przeszłowski, Łukasz, & Mazurkow, A. (2020). Biodegradable polymer composites used in rapid prototyping technology by Melt Extrusion Polymers (MEP). Polimery, 65(6), 430-436. https://doi.org/10.14314/polimery.2020.6.2

References

Medellin-Castillo H.I., Zaragoza-Siqueiros J.: Chinese Journal of Mechanical Engineering 2019, 32, 53.
Crossref

[2] Baran E.H., Erbil H.Y.: Colloids and Interfaces 2019, 3, 43.
Crossref

[3] Valerga A., Batista M., Salguero J., Girot F.: Materials2018, 11, 1322.
Crossref

[4] Siemiński P., Budzik G.: „Techniki przyrostowe, druk 3D, drukarki 3D”, Oficyna Wydawnicza Politechniki Warszawskiej, Warszawa 2015.

[5] Kampa A.: Selected Engineering Problems 2012, 3, 93.

[6] Pham D.T., Gault R.S.: Journal of Machine Tools & Manufacture 1998, 38, 1257.
Crossref

[7] Dudek P.: Archives of Metallurgy and Materials 2013, 58, 1415.
Crossref

[8]
Crossref

[9]
Crossref

[10] Lee S.C., Kim S.G., Kim H.J., Ahn S.H.: Journal of Materials Processing Technology 2007, 187–188, 627.
Crossref

[11] Kumar S., Kruth J.P.: Materials and Design 2010, 31, 850.

[12] Karalekas D., Antoniou K.: Journal of Materials Processing Technology 2004, 153–154, 526.
Crossref

[13] Yan Y., Li S., Zhang R. et al.: Tsinghua Science Technology 2009, S1 (14), 1.
Crossref

[14] Boschetto A., Bottini L., Veniali F.: Additive Manufacturing 2016, 12, 334.
Crossref

[15] Mohamed O.A., Masood S.H., Bhowmik J.L.: Materials and Manufacturing Processes 2016, 31, 1983.
Crossref

[16] Pandey P.M.: Materials Science Forum 2012, 101—109, 710.
Crossref

[17] Caban J., Szala M., Kęsik J., Czuba Ł.: Eksploatacja i Testy 2017, 6, 573.

[18] Durgun I., Ertan R.: Rapid Prototyping Journal 2014, 20, 228.
Crossref

[19] Mahomed O.A., Masood S.H., Bhowmik J.L.: International Journal on Future Revolution in Computer Science & Communication Engineering 2015, 1 (3), 42.

[20] Mohamed O.A., Masood S.H., Bhowmik J.L.: Applied Mathematical Modelling 2016, 40, 10052.
Crossref

[21] Górski F., Wichniarek R., Kuczko W.: Journal of Machine Engineering 2014, 3, 14.

[22] Mohamed O.A., Masood S.H., Bhowmik J.L., Somers A.E.: Journal of Manufacturing Processes 2017, 29, 149.
Crossref

[23] Song R., Telenko C.: Journal of Cleaner Production 2017, 148, 895.
Crossref

[24] Beniak J., Krizan P., Matus M., Sajgalik M.: MATEC Web of Conferences 2018, 157, 06001.
Crossref

[25] Dudek P., Rapacz-Kmita A.: Archives Metallurgy and Materials 2016, 61, 891.
Crossref

[26] Cuiffo M.A., Snyder J., Elliott A.M. et al.: Applied Sciences-Basel 2017, 7, 579.
Crossref

[27] Valerga A.P., Batista M., Fernandez-Vidal S.R.: Polymers 2019, 11, 566.
Crossref

[28] Rodriguez-Panes A., Claver J., Camacho A.M.: Materials 2018, 11, 1333.
Crossref

[29] Yang L., Li S., Li Y. et al.: Journal of Materials Engineering and Performance 2019, 28, 169.
Crossref

[30] Zhao Y., Chen Y., Zhou Y.: Materials & Design 2019, 181, 108089.
Crossref

[31] Altan M., Eryildiz M., Gumus B., Kahraman Y.: Materials Testing 2018, 60, 471.
Crossref

[32] Torres J., Cotelo J., Karl J., Gordon A.P.: JOM 2015, 67, 1183.
Crossref

[33] Wach R.A., Wolszczak P., Adamus-Wlodarczyk A.: Macromolecular Materials and Engineering 2018, 303, 1800169.

[34] Ivanov E., Kotsilkova R., Xia H. et al.: Applied SciencesBasel 2019, 9, 1209.
Crossref

[35] Steinle P.: Journal of Occupational and Environmental Hygiene 2016, 13, 121.
Crossref

[36] Haq R.H.A., Rahman M.N.A., Ariffin A.M.T. et al.: IOP Conference Series: Materials Science and Engineering 2017, 226, 012038.

[37] Haq R.H.A, Marwah O.M.F., Rahman M.N.A. et al.: International Journal of Integrated Engineering: Special issue Mechanical Engineering 2018, 10, 187.
Crossref

[38] Liu Z., Lei Q., Xing S.: Journal of Materials Research and Technology 2019, 8, 3741.
Crossref

[39] Heidari-Rarani M., Rafiee-Afarani M., Zahedi A.M.: Composites Part B: Engineering 2019, 175, 107147.
Crossref

[40] Yang L., Li S., Zhou X. et al.: Synthetic Metals 2019, 253, 122.
Crossref

[41] Camargo J.C., Machado A.R., Almeida E.C. et al.: International Journal of Advanced Manufacturing Technology 2019, 103, 2423.
Crossref

[42] Coppola B., Garofalo E., Di Maio L. et al.: AIP Conference Proceedings 2018, 1981, 020086.
Crossref

[43] Arun K., Aravindh K., Raja K. et al.: Materials TodayProceedings 2018, 5, 13107.
Crossref

[44] Piekarska E.: Przetwórstwo tworzyw 2009, 12 (3), 98.

[45] Valerga A.P., Batista M., Puyana R. et al.: Procedia Manufacturing 2017, 13, 924.
Crossref

[46] Mico-Vicent B., Perales E., Huraibat K. et al.: Materials 2019, 12, 1423.
Crossref

[47] Yifan J., Wan Y., Liu Z.: MATEC Web of Conferences 2017, 95, 05001.
Crossref

[48] Topiarzova R., Cablik V.: Inżynieria Mineralna 2011, 12 (2), 89.

[49] Ahmed S.W., Hussain G., Al-Ghamdi K.A., Altaf K.: Journal of Thermoplastic Composite Materials 2019.
Crossref

[50] Li Y., Gao S., Dong R.: Journal of Materials Engineering and Performance 2018, 27, 492.
Crossref

[51] Araujo H., Leite M., Ribeiro A.M.R. et al.: Frattura ed Integrità Strutturale 2019, 13 (49), 478.
Crossref

[52] Tagami T. Nagata N., Hayashi N. et al.: International Journal of Pharmaceutics 2018, 543, 361.
Crossref

[53] Fu J., Yu X., Jin Y.: International Journal of Pharmaceutics 2018, 539, 75.
Crossref

Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 378

PDF Downloads : 229

Katarzyna Bulanda

Affiliation
Rzeszow University of Technology, Department of Polymer Composites, al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland

Mariusz Oleksy molek@prz.edu.pl

Affiliation
Rzeszow University of Technology, Department of Polymer Composites, al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland

Rafał Oliwa

Affiliation
Rzeszow University of Technology, Department of Polymer Composites, al. Powstańców Warszawy 6, 35-959 Rzeszów, Poland

Grzegorz Budzik

Affiliation
Rzeszow University of Technology, Department of Mechanical Engineering, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Łukasz Przeszłowski

Affiliation
Rzeszow University of Technology, Department of Mechanical Engineering, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland

Aleksander Mazurkow

Affiliation
Rzeszow University of Technology, Department of Mechanical Engineering, al. Powstańców Warszawy 8, 35-959 Rzeszów, Poland