Register Login ##{$loggedInUsername}##
 
  Język Polski   English
baner

Advanced filters
 

Search Results

Synthesis and applications of calcium-aluminum layered double hydroxides - an overview
Ira Wahadah Md Ghazali    Farah Liyana Bohari    Nur Nadia Dzulkifli    Asiah Abdullah    Is Fatimah    Sheikh Ahmad Izaddin Sheikh Mohd Ghazali   
518-526
2021-10-29

Thermo-catalytic degradation of low density polyethylene over clinoptilolite - the effect of carbon residue deposition
K. Tomaszewska    J. Kałużna-Czaplińska    W. Jóźwiak   
222-226
2010-03-30

Application of cax tools in the design of injection molds
J. Ziobro    A. Marciniec   
877-882
2010-12-30

Application of silver nanoparticles in the modification of polymers
M. Wenda    R. Jeziórska    M. Zielecka    M. Panasiuk   
166-171
2021-01-24

Hydrocarbon fractions from the thermal cracking of polyolefin wastes - synthesis, purification and applications
J. Walendziewski   
782-787
2010-10-30

Polyglycidol—how is it synthesized and what is it used for?
A. Dworak    S. Slomkowski    T. Basinska    M. Gosecka    W. Walach    B. Trzebicka   
641-649
2013-09-30

Application of modulated differential scanning calorimetry (MDSC) for polymers characterization
K. Pielichowski    K. Flejtuch   
784-792
2022-09-18

Application of in-line measurement technique for evaluation of rheological properties of polyethylene/calcium carbonate composites
A. Kloziński   
788-798
2021-01-24

Applications of epoxy resins in electronics and optoelectronics. Part III, Epoxy resins with nonlinear optical properties
W. Mazela    P. Czub    J. Pielichowski   
532-545
2022-08-26

Polymer studies using atomic force microscopy (AFM). Part I. Principles of AFM and its application in polymer morphology investigations
H. Kaczmarek    R. Czajka    M. Nowicki    D. Ołdak   
775-783
2022-09-18

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions
E. Sasimowski    J. W. Sikora    B. Królikowski   
505-510
2014-06-30

Computer modeling of melt spinning from a crystallizing polymer. Part II. Applications of the mathematical model
L. Jarecki   
420-427
2022-09-19

Physical properties and application of polyamide 12
G. Lewandowski    E. Rytwińska    E. Milchert   
829-835
2022-08-30

Experimental methods of investigations of polymer flow in injection mold channels
E. Bociąga   
170-178
2022-08-26

New bioactive polymer filtering material composed of nonwoven polypropylene containing alkylammonium microbiocides on a perlite carrier
B. Gutarowska    B. Brycki    K. Majchrzycka    A. Brochocka   
568-574
2010-08-30

Assessment of the influence of mineral fillers on polyethylene crosslinking in the presence of peroxide by rheometric method
S. Kudła   
577-580
2022-08-18

Modeling and computer simulations of spherulitic crystallization of polymers
E. Piórkowska   
323-334
2022-09-19

The use of photogrammetry in improving quality of workpieces after an injection molding process
M. Wieczorowski    B. Gapiński    M. Grzelka    M. Szostak    M. Szymański   
134-144
2021-01-13

Application of the X-ray micro-computed tomography to the analysis of the structure of polymeric materials
Piotr P. Szewczykowski    Łukasz Skarżyński   
12-22
2021-01-12

Application of waste phosphogypsum in thermoplastic and chemosetting composites
E. Kowalska    Z. Wielgosz    M. Żubrowska    S. Pasynkiewicz    M. Choroś   
828-836
2022-09-01

Biopolymers and their applications in agriculture
P. Siwek    A. Libik    K. Twardowska-Shmidt    D. Ciechańska    I. Gryza   
806-811
2010-12-30

Use of pig spinal cord waste as a valuable source of biologically active substances
K. Kurzepa    K. Karasełło    B. Baranowska    A. Grabowska    W. Walisiewicz-Niedbalska    K. Różycki    A. Kwiatkowska-Patzer    W. Lipkowski   
364-368
2012-05-30

Chitosan-based nanocapsules of core-shell architecture
J. Szafraniec    J. Odrobińska    D. Lachowicz    G. Kania    S. Zapotoczny   
509-515
2021-01-15

Thermoresponsive polymer surfaces and their application in tissue engineering
A. Utrata-Wesołek    N. Oleszko-Torbus    M. Bochenek    D. Kosowski    A. Kowalczuk    B. Trzebicka    A. Dworak   
327-338
2021-01-13

Polymer/clay nanocomposites
M. A. Nour   
326-331
2022-09-18

Doped polymeric systems produced by sol-gel technology: optical properties and potential industrial applications
R. Reisfeld   
95-103
2022-08-30

Application of corona treatment to modify the surface layer of textile polimer materials. Analysis of the issue, design of equipment, and preliminary studies
S. Brzeziński    M. Żenkiewicz    S. Połowiński    D. Kowalczyk    I. Karbownik    S. Lutomirski    G. Malinowska   
421-429
2022-08-18

Molecularly imprinted polymers in pharmaceutical sciences. Part I. The principles of molecular imprinting. Applications in drug synthesis and drug delivery systems
P. Luliński   
799-805
2010-12-30

Hydrogel microcapsules containing natural or chemically modified oligochitosan - mechanical properties and porosity
A. Bartkowiak    W. Brylak   
547-554
2022-08-30

Silane coupling agents. Part IX. Epoxyfunctional carbosilanes
H. Maciejewski    I. Dąbek    B. Marciniec   
677-683
2022-09-01

Application of microwave radiation for crosslinking of sodium polyacrylate/silica gel system used as a binder in foundry sands
B. Grabowska    M. Holtzer   
841-847
2022-08-26

Keratin-associated protein micromaterials for medical and cosmetic applications
A. W. Lipkowski    B. Gajkowska    A. Grabowska    K. Kurzepa   
386-388
2022-08-18

The use of tree leaves as reinforcement in composites with recycled PE-HD matrix
K. Sałasińska    A. Osica    J. Ryszkowska   
646-655
2012-09-30

Reaction of low molecular weight bisphenol A epoxy resin with poly(1,3-phenylenemethylphosphonate)
B. Szczepaniak    P. Jankowski    J. Sołtysiak   
293-301
2014-04-30

Influence of accelerated weathering on mechanical and thermomechanical properties of poly(lactic acid) composites with natural waste filler
Mateusz Barczewski    Jacek Andrzejewski    Danuta Matykiewicz    Agnieszka Krygier    Arkadiusz Kloziński   
119-126
2021-01-12

Pyrolysis gas chromatography and its new possibilites in the analysis of polymers
J. Hetper   
751-758
2022-09-21

Oxygen inhibition of photopolymerization processes and methods of its suppression
M. Biernat    G. Rokicki   
633-645
2022-09-01

Conversion-Temperature-Transformation (CTT) cure diagram for EPY® epoxy system
M. Urbaniak    K. Grudziński   
255-258
2022-08-26

Coordination polymerization of alkenylsilsesquioxanes and their copolymerization with olefins or styrene
P. Groch    K. Dziubek    K. Czaja   
289-297
2015-05-30

Application of ATOS II optical system in the techniques of rapid prototyping of epoxy resin-based gear models
T. Dziubek    M. Oleksy   
44-51
2021-01-15

Hydrophilic-hydrophobic rubber composites with increased susceptibility to biodegradation
M. Zaborski    M. Piotrowska    Z. Żakowska   
534-538
2022-08-30

Coagents for peroxide curing of hydrogenated acrylonitrile-butadiene elastomer
M. Przybyszewska    M. Zaborski    A. Masek   
814-819
2022-08-18

Studies on the effect of curing conditions on the curing rate and mechanical properties of moisture-cured poly(urethane-urea) elastomers containing oligocarbonate segments
J. Kozakiewicz    G. Rokicki    J. Przybylski    K. Sylwestrzak    P. G. Parzuchowski    K. M. Tomczyk   
564-570
2011-08-30

Application of genetic algorithms to model the structure of molecular crystals
W. Łużny    W. Czarnecki   
542-548
2014-08-30

The use of a mixer with built-in Parshall’s venturi for modification of bentonite designed for the filling of polymer resins
Mariusz Oleksy    Joanna Oliwa    Grzegorz Budzik    Rafał Oliwa    Katarzyna Bulanda    Maciej Nędza   
432-435
2021-01-12

4-methyl-4-[2-(naphthalene)-2-oxoethyl] morpholin-4-ium iodide as a water soluble photoinitiator
Fatma Ozcan    Zekeriya Dogruyol    Sevnur Keskin Dogruyol   
215-220
2023-06-27

Application multicriterial optimization for determination of crystallinity degree of semicrystalline polymers
M. Rabiej   
288-295
2022-09-17

Application of epoxy resins in electronics and optoelectronics. Part 1. Mechanical properties and thermal stability of epoxy resins used for encapsulation of electronic devices
W. Mazela    P. Czub    J. Pielichowski   
233-239
2022-09-01

Shearing force breaking the connection of selected polymers with deciduous tooth enamel after the exposure to ozone
L. Wagner    A. Błaszczyk    W. Michalski   
33-37
2012-01-30

Biobased polyurethane foams modified with natural fillers
A. Prociak    M. Kurańska    E. Malewska    L. Szczepkowski    M. Zieleniewska    J. Ryszkowska    J. Ficoń    A. Rząsa   
592-599
2015-09-30

Natural cork. Part I. Cork oak tree culture, macro- and micromorphology of cork
M. Urbaniak    R. Gołuch-Góreczna    A. K. Błędzki    S. Gajdziński   
388-393
2021-01-15

Application of polymeric materials for obtaining gears with involute and sinusoidal profile
Mariusz Sobolak    Piotr Połowniak    Mariusz Cieplak    Mariusz Oleksy    Katarzyna Bulanda   
563-567
2020-12-16

Cyclic carbonates used in the synthesis of oligocarbonate diols involving step growth polymerization
G. Rokicki    T. Kowalczyk    J. Kozakiewicz    A. Piotrowska   
483-493
2022-09-19

Synthesis of polyimides from poly(amic acids) and their esters
E. Hałasa   
20-28
2022-09-01

Selected biodegradable polymers - preparation, properties, applications
J. Gołębiewski    E. Gibas    R. Malinowski   
799-807
2022-08-23

Compatibilized ethylene-propylene-diene terpolymer nanocomposites containing different type of organoclays
A. Malas    C. K. Das   
204-211
2013-03-30

Hydration properties of selected DNA-lipid complexes
J. Nizioł    J. Kobierski    H. Harańczyk    D. Zalitacz    E. Hebda    J. Pielichowski   
18—25
2015-01-30

Conversion of polyurethane technological foam waste and post-consumer polyurethane mattresses into polyols – industrial applications
M. Sołtysiński    K. Piszczek    D. Romecki    S. Narożniak    J. Tomaszewska    K. Skórczewska   
234-238
2021-01-13

The use of thermoplastic composites based on polyurethanes to obtain kidney calyceal-pelvic systems using 3D printing
Krzysztof Balawender    Łukasz Przeszłowski   
2024-04-17

Ionic liquids as convenient latent hardeners of epoxy resins
K. Kowalczyk    T. Spychaj   
833-835
2022-09-17

Polyurethane ionomers. Part II. Preparation, structure, properties and applications of polyurethane cationic dispersions
P. Król    B. Król   
615-622
2022-09-01

Synthesis of a novel phosphorus-containing polysiloxane and its use as the modifier of thermal properties of an epoxy resin
M. Hou    W. Liu    Q. Su    Y. Liu   
836-840
2022-08-26

Stimuli-sensitive polymers. Part 2, Application
A. Utrata-Wesołek    B. Trzebicka    A. Dworak   
334-341
2022-08-18

The use of waste poly(ethylene terephthalate) and phenol-formaldehyde resin for the preparation of activated carbons
G. Makomaski    W. Ciesińska    J. Zieliński   
635-639
2012-09-30

Efficiency of thermomechanical reclaiming of ground tire rubber conducted in counter-rotating and co-rotating twin screw extruder
K. Formela    M Cysewska   
231-238
2014-03-30

The use of natural polymers for treatments enhancing sowing material

Grażyna K Korbecka-Glinka    Maria Wiśniewska-Wrona    Ewa Kopania   
11-20
2021-01-20

Use of rapid prototyping technology in complex plastic structures. Part I. Bench testing and numerical calculations of deformations in harmonic drive made from ABS copolymer
Jacek Pacana    Rafał Oliwa   
56-62
2021-01-12

Acrylamide derivatives of starch in two-phase systems used for purification of proteins. Part II. The use for purification of the wheat flour derived alpha-amylase inhibitor
Z. Brzozowski    N. Pietruszka    v I. Galae    B. Mattiasson   
707-712
2022-09-21

Kinetics of decomposition of poly(vinyl chloride)/low-migration polyesterurethane plasticizer blend - a thermogravimetric study
B. Świerz-Motysia    K. Pielichowski   
601-604
2022-09-01

Titanium catalyst (TiCl4) supported on MgCl2(THF)(AlEt2Cl)0.34 for ethylene polymerization
W. Ochędzan-Siodłak    M. Nowakowska   
184-198
2022-08-26

Modifiers applied in polymer recycling: processing, properties and application
R. Jeziórska    B. Świerz-Motysia    A. Szadkowska   
748-756
2010-10-30

Application of life cycle assessment and exergy to environmental evaluation of selected polymers
K. Czaplicka-Kolarz    D. Burchart-Korol    J. Korol   
605-609
2013-08-30

Silsesquioxanes and their application in the synthesis of polymeric materials
P. Groch    K. Dziubek    K. Czaja   
219-231
2015-04-30

Application of vacuum casting technology for manufacturing of polymeric gears prototypes
R. Oliwa    M. Oleksy    M. Heneczkowski    G. Budzik    O. Markowska    Ł. Przeszłowski   
36-43
2021-01-15

Estimation of the aluminum salt effect on homopolymerization of acrylamide and its copolymerization with acrylic acid by DSC
A. Drzycimska    T. Spychaj   
460-463
2022-08-30

Model equation of relative solute permeability coefficient of membrane-concentration boundary layers complex
A. Bryll    K. Michalska-Małecka    S. Grzegorczyn    A. Ślęzak   
662-667
2022-08-18

Elastomeric styrene-isoprene-styrene (SIS) block copolymer modified with a borone derivative as compatibilizer for PE-LD/PS an PP/PS mixtures
E. Wierzbicka    I. Legocka   
211-217
2011-03-30

Reactive surfactants – chemistry and applications Part I. Polymerizable surfactants
M. Kaczorowski    G. Rokicki   
747-757
2021-01-24

Influence of active compounds on the degradation of polylactide biocomposites
Magdalena Stepczyńska   
410-416
2021-01-12

The use of chitosan as an effective carrier of theophylline - an anti-asthmatic drug
Noor Firas Aziz    Samer Hussein-Al-Ali    Mowafaq Mohammed Ghareeb    Nashwan Abdallah Nashwan   
157-168
2023-05-17

Polyimides. Part II. Processing, functional properties and application
E. Hałasa   
254-262
2022-09-17

Some new problems of automatic control of extrusion process
J.W. Sikora    B. Broel-Plater   
195-201
2022-09-01

Modifications of siloxane polymers
M. Cypryk    B. Delczyk    P. Pospiech    K. Strzelec   
496-502
2022-08-26

Application of computer simulation of thermoset resins casting in rapid prototyping techniques
M. Oleksy    M. Heneczkowski    G. Budzik   
895-898
2010-12-30

Nanoparticles used to improve physical properties of polymer composites for food packaging materials
J. Łopacka   
864-868
2013-12-30

Water-based poly(urethane-urea) dispersions —meeting the European Union legislation
I. P. Fernandes    M. R. Costa    M. J. Ferreira    M. F. Barreiro   
536-540
2015-09-30

Polyhydroxyalkanoates – applications and recycling
P. Kurcok    M. Kawalec    M. Sobota    M. Michalak    M. Kwiecień    S. Jurczyk   
364-370
2021-01-15

Polymer materials used in medicine processed by additive techniques
Paweł Turek    Grzegorz Budzik    Mariusz Oleksy    Katarzyna Bulanda   
510-515
2020-12-16

Influence of soft segments on thermal and mechanical properties of terpoly(ester-ether-ester)s
P. Zdebiak    P. El Fray   
764-768
2022-08-24

The properties of SiO2/dye composite pigments and their applications for silicone rubber
A. Kosmalska    M. Zaborski    J. Sokołowska   
215-221
2010-03-30

Solid-state polycondensation (SSP) as a method to obtain high molecular weight polymers. Part I. Parameters influencing the SSP process
I. Steinborn-Rogulska    G. Rokicki   
3-13
2013-01-30

The use of modified silica to control the morphology of polyamide 11 and poly(phenylene oxide) blends
Regina Jeziórska    Agnieszka Szadkowska    Maciej Studziński    Magdalena Żubrowska   
399-410
2021-08-24

Application of halloysite as filler in the production of rigid PUR-PIR foams
J. Paciorek-Sadowska    M. Borowicz    B. Czupryński    J. Liszkowska    E. Tomaszewska   
185-190
2021-01-13

Influence of steam sterilization and raster angle on the deflection of 3D printing shapes

Rapid communication

Małgorzata Zaborniak    Grzegorz Budzik    Katarzyna Grzywacz-Danielewicz    Jerzy Józwik    Krzysztof Dziedzic    Marek Magniszewski    Danuta Rak   
117-122
2024-03-08

Effect of chemical modification of poly(butylene tere-phthalate) on flexible properties
R. Ukielski    F. Lembicz   
784-789
2022-09-17

Polyurethane ionomers. Part I. Preparation, structure, properties and application of anionic polyurethane or polyurethane-acrylic dispersions
P. Król    B. Król   
530-540
2022-09-01

Importance of Boscovich's theory of natural philosophy for polymer science
D. Stoiljković   
804-810
2022-08-26

Application of combinatorial chemistry and high-throughput methods in the syntheses and investigations of polymer materials
M. Paturej    M. El Fray   
179-188
2009-03-15

Application of cationic polymerization by activated monomer mechanism and click reactions for the synthesis of functionalized polylactide
M. Bednarek   
501-509
2012-08-30

Polyurethanes modified with natural polymers for medical application. Part II. Polyurethane/gelatin, polyurethane/starch, polyurethane/cellulose
J. Kucińska-Lipka    I. Gubańska    H. Janik   
197-200
2014-03-30

Evaluation of the strength of glass fiber-reinforced composite posts placed in root canals in different quantitative configurations and exposed to crushing forces
L. Wagner    M. Ponto-Wolska    Z. Raszewski    Ł. Zadrożny   
875-880
2021-01-15

Experimental analysis on the technical behavior of carbon black filled rubber blends’ rollers for rice husk removal application
Prabhakaran Paramasivam    Rajesh Ranganathan    Rajasekar Rathanasamy    Gobinath Velu Kaliyannan    Sathish Kumar Palaniappan    Samir Kumar Pal    Moganapriya Chinnasamy   
50-55
2021-01-12

Temperature calibration in the cooling operation mode of the UNIPAN-TERMAL 605 M model DSC calorimeter
P. Sajkiewicz    A. Wasiak   
608-618
2022-09-21

Sole sec-butylotrifenyloboranowe barwników hemicyjanowych jako efektywne inicjatory polimeryzacji rodnikowej inicjowanej fotoindukowanym przeniesieniem elektronu. Cz. 2, Badania kinetyczne i zastosowanie teorii przeniesienia elektronu
B. Jędrzejewska    J. Kabatc    J. Pączkowski   
418-423
2022-09-01

Carboxymethyl starch with high degree of substitution: synthesis, properties and application
T. Spychaj    M. Zdanowicz    J. Kujawa    B. Schmidt   
503-511
2013-08-30

A new extrusion head with integrated ultrasonic device and online process parameters measurements system — design and testing
M. Muniesa    Á. Fernández    I. Clavería    C. Javierre    J. A. Sarasua    M. Blanco   
209-216
2015-03-30

Mechanical properties of colored acrylonitrile-butadiene-styrene injection molded parts
M. Trzaskalska    P. Palutkiewicz    E. Bociąga   
791-798
2021-01-13

Environmentally degradable polymeric materials (EDPM) in agricultural applications - an overview
E. Chiellini    P. Cinelli    S. D'Antone    V. I. Ilieva   
538-544
2022-09-18

Preparation of spherical particles of 3-hydroxybutyric acid oligomer
A. Cebulska    Z. Jedliński   
436-441
2022-08-30

The application of chelating polymers for the removal of arsenic compounds from water
D. Ociński    E. Kociołek-Balawejder   
11-19
2011-01-30

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions
K. Formela    M. Bogucki   
488-494
2014-06-30

Functionalized nanofiller for polymers – preparation, properties and application
E. Wierzbicka    I. Legocka    E. Wardzińska-Jarmulska    B. Szczepaniak    M. Krzyżewski   
670-676
2021-01-24

Advances in studies of thermal degradation of polymeric materials Part II. The influence of various factors on the thermal degradation of polymeric materials during their processing
Daria Kosmalska    Halina Kaczmarek    Rafał Malinowski    Krzysztof Bajer   
317-326
2021-01-12

The use of PLA filled with fibrillar nanocellulose from wastepaper as an expansion joint material

Małgorzata Szafraniec    Ewelina Grabias-Blicharz    Magda Droździel-Jurkiewicz    Aneta Tor-Świątek    
93-98
2023-05-05

Application of derivatives of UV spectra and similarity indices to identification of milk proteins separated using reversed-phase high performance liquid chromatography
P. Minkiewicz    J. Dziuba    D. Nałęcz   
106-110
2022-09-17

Phase transitions of poly(ethylene oxide)/carboxylic acid blends able to storage of energy
K. Pielichowski    K. Flejtuch   
173-179
2022-09-01

Polymers for pharmaceutical applications
M. Sobczak    E. Olędzka    W. L. Kołodziejski    R. Kuźmicz   
411-420
2022-08-26

Effect of electron beam irradiation and plastic deformation on molar mass of medical grade ultra-high molecular weight polyethylene
M. Sudol    K. Czaja   
890-894
2010-12-30

Polyesters and polyester carbonates for controlled drug delivery. Part II. Implantable systems
K. Jelonek    J. Kasperczyk   
858-863
2013-12-30

Morphological changes in the surface of enamel of primary teeth after application of ozone gas
L. Wagner    A. Błaszczyk   
713-717
2015-12-30

Professor Andrzej Duda in memoriam
S. Penczek    P. Lewinski    J. Pretula    M. Socka   
239-253
2021-01-15

Biodegradable polymer composites used in rapid prototyping technology by Melt Extrusion Polymers (MEP)
Katarzyna Bulanda    Mariusz Oleksy    Rafał Oliwa    Grzegorz Budzik    Łukasz Przeszłowski    Aleksander Mazurkow   
430-436
2020-12-16

Application of epoxidized soybean oil for the control of viscosity of epoxy compositions
P. Czub   
821-828
2022-08-30

Application of spectroscopic methods for investigation of the course of poly(sodium acrylate) crosslinking with use of different crosslinking agents
B. Grabowska    M. Holtzer   
531-536
2022-08-23

Organo-silicon coating deposition on polyethylene films by pulsed dielectric-barrier discharges
J. Sentek    Z. Rżanek-Boroch    M. Brykała    K. Schmidt-Szałowski   
127-134
2020-02-28

Modification of low density polyethylene for manufacturing of oxo-biodegradable films
R. Machlarz    M. Heneczkowski   
754-759
2014-10-30

Modification of poly(vinyl chloride) by aromatic amines: application to the extraction of some metal cations
Adnen Mabrouki    Fayçel Ammari   
389-398
2021-08-09

The use of soluble resin for additive manufacturing of automotive industry prototypes
Tomasz Pawlak    Jacek Nabiałek    Mateusz Klepka   
579-584
2023-12-14

Ionomeric block copolymers : preparation, characteristics and application
T. Wódka    R. Jantas   
678-663
2022-09-17

Use of in situ generated Lewis acids in crosslinking of elastomers
B. Wolska    W.M. Rzymski   
514-521
2022-09-01

Application of 29Si NMR spectroscopy in organosilicon polymers’ investigations
M. Cypryk   
730-735
2022-08-26

Synthesis and application of oligomers obtained from oxamic acid and ethylene carbonate
I. Zarzyka-Niemiec   
106-113
2009-02-12

Epoxy resin crosslinked with conventional and deep eutectic ionic liquids
H. Maka    T. Spychaj   
456-462
2012-06-30

Mechanical properties of polypropylene copolymers composites filled with rapeseed straw
D. Paukszta    M. Szostak    M. Rogacz   
165-169
2014-02-28

Application of a multicriterial optimization to the resolution of X-ray diffraction curves of semicrystalline polymers
M. Rabiej   
821-833
2021-01-15

The weathering test of polypropylene composites
Ł. Korach    K. Czaja    D. Truszczyński    D. Włodarczyk    A. Bańkowski    A. Wiśniewski   
551-554
2022-09-21

Methods of analysis of poly(aspartic acid) and its derivatives
E. Tylek    J. Polaczek    J. Pielichowski   
341-345
2022-09-01

Aspects of designing and manufacturing of micro-parts and application of micro injection molding technology
J. W. Kaczmar    A. Brzostek   
94-98
2022-08-26

Hybrid polymer composites for rapid prototyping of gears
M. Oleksy    G. Budzik    M. Heneczkowski   
403-407
2010-05-30

Improving the mechanical performance of PLA composites with natural, man-made cellulose and glass fibers — a comparison to PP counterparts
A. Jaszkiewicz    A. K. Bledzki    P. Franciszczak   
435-442
2013-06-30

Computer simulations of cellular injection moulding process
P. Palutkiewicz   
132-143
2015-02-28

Multilayer hybrid polypropylene composite with single and wood-polymer composites layers
A. Kościuszko    T. Sterzyński    K. Piszczek   
755-761
2021-01-13

Use of additive compatibilization for recycling of municipal plastics waste
I. Fortelny    Z. Krulis    D. Michalkova   
534-538
2022-09-18

Some aspects of the effects of interactions of phenolic antioxidants with dicumyl peroxide on the properties of crosslinked polyolefins
S. Kudła   
431-435
2022-08-30

Application of corona discharge to modify the surface layer of polyester textiles
S. Brzeziński    M. Żenkiewicz    S. Połowiński    I. Kowalczyk    I. Karbownik    S. Lutomirski    G. Malinowska   
552-558
2022-08-18

Molecularly imprinted polymers in pharmaceutical sciences. Part II. Applications in pharmaceutical analysis
P. Luliński   
3-10
2011-01-30

Application of ion bombardment to modify tribological properties of elastomers
D. M. Bieliński    U. Ostaszewska    J. Jagielski   
416-422
2021-08-27

Production and characterization of poly(urea-urethane) elastomers synthetized from rapeseed oil-based polyols. Part I. Structure and properties
M. Auguścik    M. Kurańska    A. Prociak    W. Karalus    K. Lipert    J. Ryszkowska   
490-498
2021-01-24

Application of in-line rheological measurements for characterization of polypropylene/opoka rock powder composites
Arkadiusz Kloziński    Paulina Jakubowska    Joanna E. Przybylska    Robert Przekop   
282-289
2021-01-12

Modification of bentonite nanoclay for textile application
Muhammad Amir    Syed Farhan Hasany    Muhammad Sajid Ali Asghar   
79-85
2023-04-25

Application of novel unsaturated organosilane ethers in cationic UV-crosslinkable acrylic PSA systems
Z. Czech    M. Urbala   
837-840
2022-09-01

New pyrazoloquinolines and their application in organic light-emitting diodes with poly(N-vinylcarbazole) matrix
E. Gondek    J. Sanetra    P. Armatys    J. Nizioł    K. Chaczatrian    A. Danel   
163-167
2022-09-01

Compatibilization of polyolefins waste based blends by reactive modifiers with anhydride or oxazoline functional groups
R. Jeziórska    A. Szadkowska    M. Studziński   
371-374
2022-08-26

Screw extrusion technology — past, present and future
T. Sakai   
847-857
2013-12-30

Thermal stability and flammability of polyolefin/halloysite nanotubes composites
K. Szpilska    K. Czaja    S. Kudła   
673-679
2015-12-30

Preparation and characterization of poly(urea-urethane) elastomers synthetized from rapeseed oil-based polyols. Part II. Thermal properties
J. Ryszkowska    M. Auguścik    M. Kurańska    R. Oliwa    J. Czech-Polak    A. Prociak   
136-143
2021-01-15

Coloration of poly(lactic acid) based textiles – a review
Gulzar Ahmad Baig   
415-429
2020-12-16

Application of the Euler characteristic to the study of homopolymer blends and copolymer melts
A. Aksimentiev    R. Hołyst   
307-323
2022-09-19

2-Vinyloxycarbonyloxymethyl antraquinone as a new unsaturated photoinitiator for UV-cured acrylic pressure-sensitive adhesives
Z. Czech   
754-757
2022-08-30

Syntheses of block trimethylene carbonate/?-caprolactone copolymers via coupling of corresponding polyester diols with diisocyanates
J. Łukaszczyk    P. Jelonek    B. Trzebicka   
433-439
2022-08-23

New polyol for the production of rigid polyurethane-polyisocyanurate foams. Part II. Preparation of rigid polyurethane-polyisocyanurate foams with use of new boroorganic polyol
J. Paciorek-Sadowska    B. Czupryński    J. Liszkowska    W. Jaskółowski   
99-105
2020-02-28

Polyurethanes in pharmacy — current state and perspectives of the development
K. Żółtowska    M. Sobczak    E. Olędzka   
689-698
2014-10-30

Spiro-cyclotriphosphazene with three functional end groups: synthesis and structural characterization of new polycyclotriphosphazenes with Schiff-base groups
Salah Al-Shukri    Ayad Tarik     Othman A. Al Hanbali   
341-349
2021-07-27

Application of coordination measuring methods for assessing the performance properties of polymer gears
T. Dziubek   
49-52
2021-01-13

Smart composite nanofibers based on PLA/PEG with the addition of clove oil as thermal regulators
Tugba Gungor Ertuğral   
530-536
2023-10-19

Influence of the emissions and substances migrating from the plastics on the sensations of an odor of air and the flavor and odor of water
A. K. Błędzki    M. Łucka   
598-605
2022-09-17

Polyphosphazenes
A. Burczyk    J. Pielichowski   
486-490
2022-09-01

Application of the 27Al NMR spectroscopy to studies of mechanisms of cyclic esters polymerization
A. Kowalski    M. Florczak    J. Libiszowski    K. Majerska    A. Duda   
722-729
2022-08-26

Biopolymers as renewable polymeric materials for sustainable development - an overview
Abhinav Srivastava    Atul Kumar Srivasatva    Ashutosh Singh    Priti Singh    Sangeeta Verma    Monika Vats    Suresh Sagadevan   
185-196
2022-06-10

Application of membrane processes in chemical industry — feedstock recycling, energy saving
T. Porębski    S. Tomzik    W. Ratajczak    M. Talma-Piwowar    W. Capała   
382-388
2012-05-30

Star-shaped poly[2-(dimethylamino)ethyl methacrylate] and its derivatives: toward new properties and applications
F. A. Plamper    Ch. V. Synatschke    A. P. Majewski    A. Schmalz    H. Schmalz    A. H. E. Müller   
66-73
2014-01-30

Biodegradable polymers for the treatment of tuberculosis. Part I. Epidemiology, therapy and treatment methods
M. Budnicka    A. Gadomska-Gajadhur    P. Ruśkowski    L. Synoradzki   
712-719
2021-01-15

The use of chemically modified PVC waste to remove ions from wastewater
Abid Ouerghui    Faycel Ammari    Christian Girard   
801-806
2020-12-17

Method of Monte Carlo entropy sampling in polymer systems
A. Sikorski   
514-519
2022-09-21

Functional azo-initiators - synthesis and molecular characteristics
B. Pabin-Szafko    E. Wiśniewska    J. Szafko   
271-278
2022-09-01

Processability of phenolic plastics determined by BIP method
A. Krzyżak    J. W. Sikora   
44-50
2022-08-26

Electrically conductive polymeric composites as potential sensor materials
S. Frąckowiak    M. Kozłowski   
390-398
2010-05-30

Biobased composites
J. Ganster    J. Erdmann    H.-P. Fink   
423-434
2013-06-30

Polymer inclusion membrane based on cellulose triacetate (CTA) plasticized with 2-nitrophenyl octyl ether
J. Rajewski    P. Łobodzin    P. Gierycz   
118-125
2015-02-28

Poly(urea-formaldehyde) microcapsules – synthesis and influence of stirring speed on capsules size
P. A. Bolimowski    R. Kozera    A. Boczkowska   
339-346
2021-01-13

Chitin and chitosan. Part II. Applications of chitosan
M. H. Struszczyk   
396-403
2022-09-18

Application of computer-aided analysis of an image for assessment of reinforced polymers structures
A. Gądek    S. Kuciel    L. Wojnar    W. Dziadur   
206-211
2022-08-30

Application of microwave radiation in the synthesis of aspartic acid/lactic acid biodegradable copolymer
J. Pagacz    J. Polaczek    J. Pielichowski    M. Migdał    A. Tokarska   
514-521
2022-08-18

Studies in the effectiveness of a new generation extruder. Part III. Co-operation of the rotational sleeve with the grooved zone of barrel
E. Sasimowski   
747-754
2012-10-30

Study of structure and fatigue strength of thermoplastic elastomers modified with nanoparticles and radiation-crosslinked
M. Rybko    M. El Fray   
400-408
2014-05-30

Relationship between crystalline structure of poly(3-hexylthiophene) blends and properties of organic thin-film transistors – a brief review
D. Chlebosz    Ł. Janasz    W. Pisula    A. Kiersnowski   
433-441
2021-01-24

Halloysite modified by melamine cyanurate and its compositions based on PA6
Dorota Kijowska    Piotr Jankowski    Ewa Wierzbicka   
259-266
2021-01-12

Environmentally hazard and toxic exoskeletons of marine crustaceans wastes in synthesizing N-deacetylated chitin

Rasha El-Mekawy   
503-508
2022-11-16

Viscosity effects in computer modeling of fiber spinning from crystallizing polymer melts
L. Jarecki    A. Ziabicki   
101-109
2022-09-01

Polymer nanocomposites with layered silicates
A. Galeski    E. Piorkowska   
323-328
2022-08-26

Application of silsesquioxanes for modification of epoxy resins
M. Heneczkowski    M. Oleksy    R. Oliwa    M. Dutkiewicz    H. Maciejewski    H. Galina   
759-765
2013-10-30

Hyperelastic behavior of two rubber materials under quasistatic and dynamic compressive loadings — testing, modeling and application
Y. Mao    Y. Li    Y. Chen    Y. Miao    Q. Deng    W. Niu   
516-522
2015-08-30

Reactive surfactants – chemistry and applications. Part II. Surface-active initiators (inisurfs) and surface-active transfer agents (transurfs)
M. Kaczorowski    G. Rokicki   
79-85
2021-01-15

Polymeric structure-forming agent for drilling muds
Sławomir Wysocki    Magdalena Gaczoł    Rafał Wiśniowski   
136-143
2020-12-15

Gelation of rigid PVC during processing
S. Zajchowski    K. Piszczek    J. Tomaszewska   
232-243
2022-09-19

Refractive index modulation in films containing single and dual chromophore system
S. Kucharski    E. Ortyl   
555-560
2022-08-30

Study of propylene polymerization using zirconocenes Ph2CCpFluZrCl2 and rac-Me2Si(2-Me,4-PhInd)2 ZrCl2 activated by combined MAO/TIBA cocatalyst
E. E. Faingol‘d    N. M. Bravaya   
358-363
2022-08-23

Bitumen fluxes of vegetable origin
I. Gawel    J. Pilat    P. Radziszewski    L. Niczke    J. Krol    M. Sarnowski   
55-60
2021-08-31

The effect of catalyst and segmental composition on the crystallization of multiblock polyesters for biomedical applications
Z. Staniszewski    A. Piegat    M. Piątek-Hnat    M. El Fray   
592-598
2014-08-30

Effects of carbon nanotubes and graphene on the structure and properties of natural rubber
Jinyong Sui    zhengu    Xiaoyi Zhang    Zhenxu Li    Lining Song    Lina Yang    Ning Wang   
217-223
2021-05-07

Recycling of ABS operating elements obtained from industry 3D printing machines
Dawid Marciniak    Piotr Czyżewski    Dariusz Sykutera    Marek Bieliński   
803-810
2021-01-12

Functionalization methods of carbon fibers – an overview
Sylwia Magdziarz    Justyna Frączyk    Maciej Boguń   
307-316
2023-06-27

Synthesis and spectroscopic characterization of polythiophene containing pendant oligoaniline groups
A. Proń    B. Dufour    P. Rannou    M. Zagórska    K. Buga    I. Kulszewicz-Bajer   
505-511
2022-09-17

Application of tris(trimethylsilyl)methyl derivatives in polymer chemistry
A. Kowalewska    W. Stańczyk    R. Eckberg   
479-485
2022-09-01

Dispersion of a filler in the rubber blend. Part II, Methods of dispersion degree assessment
D. M. Bieliński    O. Dobrowolski    L. Ślusarski   
640-647
2022-08-26

Optical properties of polyetherketoneketone based indirect dental restorations veneered with composite

Omar Alsadon    DR    DR    DR    DR   
141-148
2022-05-13

Phosphazene-promoted anionic polymerization
J. Zhao    N. Hadjichristidis    Y. Gnanou   
49-59
2014-01-30

The use of biodegradable polymer as an alternative raw material for the production of new ecopolyol
Joanna Paciorek-Sadowska    Marcin Borowicz    Marek Isbrandt    Łukasz Grzybowski    Bogusław Czupryński   
667-671
2020-12-16

A new Group of liquid reactive nitrogen and nitrogen-phosphorus flame retardants for self-extinguishing polyurethane expanded polymers. Part II. Applications to flexible polyurethane foams
N. Pietruszka    Z. Brzozowski    L. Żabski   
282-287
2022-09-21

Application of epoxy resins in electronics and optoelectronics. Part II. Ways of reduction of flammability of the resins used in electronic industry
W. Mazela    P. Czub    J. Pielichowski   
100-109
2022-09-01

Synthesis of 1,4-cyclohexanedimethanol by hydrogenation of dimethyl terephthalate and its application as a substrate in syntheses of polyesters
G. Lewandowski    A. Wróblewska    E. Milchert   
39-43
2022-08-26

Modification of PUR-PIR foams by boroorganic compound obtained on the basis of bis(hydroxymethyl)urea
J. Paciorek-Sadowska   
373-378
2010-05-30

Flame retardancy of starch –based biocomposites — aluminum hydroxide-coconut fiber synergy
E. Gallo    G. Sánchez-Olivares    B. Schartel   
395-402
2013-05-30

Influence of preparation method of keratin fibers from poultry feathers on the properties of composites from recycled high density polyethylene
K. Wrześniewska-Tosik    S. Zajchowski    J. Ryszkowska    J. Tomaszewska    J. Mirowski    K. Szoła   
109-117
2015-02-28

Coagents for peroxide crosslinking of ethylene-propylene copolymer
A. Krzywania-Kaliszewska    M. Maciejewska    M. Zaborski   
734-739
2012-10-30

Synthesis, properties and applications of new (bio)degradable polyester urethanes
J. Brzeska    P. Dacko    H. Janeczek    H. Janik    W. Sikorska    M. Rutkowska    M. Kowalczuk   
365-371
2014-05-30

Electrochemical polymerization of polymers for photovoltaic cell applications
K. Wójcik    A. Iwan   
239-247
2021-01-24

Use of rapid prototyping technology in complex plastic structures Part II. Impact of operating conditions on functional properties of polymer harmonic drives
Jacek Pacana    Rafał Oliwa   
216-223
2021-01-12

Cone calorimetric studies on the mechanism of action of new fire-retardants used for polyester resins
E. Kicko-Walczak   
808-813
2022-09-21

Application of poly(3-ethyl-3-hydroxymethyloxetane) as macroinitiator for the synthesis of star polymers of ethylene oxide. Efficiency of initiation
M. Bednarek    P. Kubisa   
719-723
2022-09-01

On the curing reaction of an epoxy resin based on mesogenic naphthalene derivative
A. Mititelu    C. N. Cascaval   
839-843
2022-09-01

Polycarbonate/maleic anhydride grafted polyethylene/graphite composites
R. Jeziórska    T. Klepka    D. Paukszta   
294-298
2022-08-26

Preparation of functionalised SiO2/F-SF poss hybrid fillers and their application in gel polymer electrolytes
K. Szwarc-Rzepka    M. Walkowiak    M. Osińska-Broniarz    M. Dutkiewicz    H. Maciejewski    T. Jesionowski   
748-758
2013-10-30

Application of the copper(II)-aminosilane catalysts in the oxidative polymerization of 2,6-dimethylphenol
S. Firlik    W. Skupiński    Z. Wielgosz    J. Stasiński   
372-376
2015-06-30

The application of micro computed tomography to assess quality of parts manufactured by means of rapid prototyping
B. Gapiński    M. Wieczorowski    M. Grzelka    P. A. Alonso    A. B. Tomé   
53-59
2021-01-15

Atomic force microscopy with fractal studies of temperature induced changes in the surface topography of polymeric materials
Rydzkowski Tomasz    Sławomir Kulesza     Mirosław Bramowicz     Iwona Michalska-Pożoga   
25-32
2020-12-17

Application of micro-thermal analysis for polymeric materials investigations
M. El Fray   
793-800
2022-09-18

Investigation of chemical stability of ether-urethane prepolymers
J. Datta    K. Leszkowski   
115-119
2022-08-23

Application of FT-IR spectroscopy to the specific migration study of an organotin heat stabilizer from rigid poly(vinyl chloride) into food simulants
Ch. Zeddam    N. Belhaneche-Bensemra   
657-661
2011-09-30

Modeling of the lamellar structure of ethylene-1-octene copolymers
S. Rabiej    M. Rabiej   
549-556
2014-08-30

Influence of the addition of chitin nanocrystals on the characteristics of cellulose acetate films
Preethi Ravikumar    Suresh Sagadevan   
98-104
2021-02-17

The use of gas chromatography for the determination of radiolytic molecular hydrogen, the detachment of which initiates secondary phenomena in the radiation modification of polymers
Wojciech Głuszewski   
697-702
2021-01-12

Synthesis of hydrogel nanocomposites and their application in removing dyes and impurities
Rajabali Ebrahimi    Mahboubeh Taherkhani   
276-285
2023-05-09

What affects the rate of free radical polymerization of a multifunctional acrylate photoinitiated by cyanine borate salts? Part I. Kinetic studies
J. Kabatc    J. Pączkowski   
322-328
2022-09-17

Effect of resol phenol-formaldehyde resin modification with the products of poly(ethylene terephthalate) chemical degradation on the properties of the resin
A. Żmihorska-Gotfryd   
408-413
2022-09-01

Glycolysis of polyurethane wastes. Part I, Glycolysis agents and catalysts
J. Datta    M. Rohn   
579-582
2022-08-26

Effect of batched water exposed to a constant magnetic field on the properties of concrete filled with waste fly ash, phosphogypsum and starch
Ewa Miękoś    Tomasz Klepka    Marek Zieliński    Dariusz Sroczyński    Łukasz Garbacz    Anna Fenyk    Anna Łukawska   
53-60
2022-02-19

Effects of blowing agent content and injection moulding conditions on selected properties and surface quality of polypropylene moulded parts
E. Bociąga    P. Palutkiewicz   
38-48
2012-01-30

From cationic ring-opening polymerization to atom transfer radical polymerization
K. Matyjaszewski   
24-37
2014-01-30

Characteristics of biopolymer films with essential oils
E. Jamróz   
428-433
2021-01-15

Application of the artificial neural networks for identification of polymers on the basis of their flammability
Małgorzata Rabiej   
613-621
2020-12-16

FT-IR ATR spectra and nanohardness measurements as used to follow the progress in photocuring of polyester resins
D. Bieliński    P. Głąb    L. Ślusarski   
494-500
2022-09-19

Studies on the spatial distribution of polymeric reagents in sonochemical reactions - application of competitive kinetics
B. Rokita    P. Ulański   
29-36
2022-09-01

Carbofunctional silanes and polysiloxanes. Part II. Preparation and applications of carbofunctional polysiloxanes
J. Chruściel    E. Leśniak    M. Fejdyś   
817-829
2022-08-23

Synthesis of oligocarbonate diols from a "green monomer" - dimethyl carbonate - as soft segments for poly(urethane-urea) elastomers
K. Tomczyk    P. G. Parzuchowski    J. Kozakiewicz    J. Przybylski    G. Rokicki   
366-372
2010-05-30

Nanocomposites of polypropylene/polyamide 6 blends based on three different nanoclays: thermal stability and flame retardancy
H. Vahabi    R. Sonnier    B. Otazaghine    G. Le Saout    J. M. Lopez-Cuesta   
350-360
2013-05-30

Effect of the conditions of thermomechanical reclaiming of ground tire rubber on the properties of reclaimed rubber materials
K. Formela    M. Bogucki    P. Stączek   
57—65
2015-01-30

Application of poly(vinyl chloride) modified with β-amino alcohols derived from limonene oxide for removal of hazardous metal ions
F. Brahmi    F. Meganem    A. Bel Hadj Amor   
283-289
2021-01-13

Application of waste polycarbonate-furfurol thermolyzates to modification of petroleum bitumens
B. Osowiecka    J. Zieliński    J. Polaczek    Z. Machowska   
269-272
2022-09-18

1 - 249 of 249 items
Łukasiewicz Research Network – Industrial Chemistry Institute
ul. Rydygiera 8,
01-793 Warszawa
email: polimeryjournal@ichp.lukasiewicz.gov.pl
tel. +48 22 633 98 04
Links:
https://ichp.lukasiewicz.gov.pl
https://lukasiewicz.gov.pl
About:
Copyright 2019 by Łukasiewicz Research Network – Industrial Chemistry Institute
OJS Support and Customization by LIBCOM
Platform & workfow by OJS/PKP