Register Login ##{$loggedInUsername}##
 
  Język Polski   English
baner

Advanced filters
 

Search Results

Effects of carbon nanotubes and graphene on the structure and properties of natural rubber
Jinyong Sui    zhengu    Xiaoyi Zhang    Zhenxu Li    Lining Song    Lina Yang    Ning Wang   
217-223
2021-05-07

Methodology of assessment of adhesive composites’ properties
T. Smal   
114-120
2013-02-28

The influence of blowing extrusion process of PA film on its structure and physical properties
J. Stasiek    E. Piórkowska    A. Gałęski   
194-203
2022-09-17

Effect of wood flour addition and modification of its surface on the properties of rotationally molded polypropylene composites
M. Barczewski    M. Szostak    D. Nowak    A. Piasecki   
772-784
2021-01-13

Physical properties and application of polyamide 12
G. Lewandowski    E. Rytwińska    E. Milchert   
829-835
2022-08-30

Effect of ethanol-assisted mixing on the selected properties and homogeneity of NR/BR blends

Chao Meng   
142-148
2023-05-16

The effect of mold temperature and injection velocity on selected properties of polyethylene moldings
E. Bociąga   
830-836
2022-09-21

Influence of accelerated weathering on mechanical and thermomechanical properties of poly(lactic acid) composites with natural waste filler
Mateusz Barczewski    Jacek Andrzejewski    Danuta Matykiewicz    Agnieszka Krygier    Arkadiusz Kloziński   
119-126
2021-01-12

The rheological properties of coal bitumens modified by polyesters.
W. Ciesińska   
144-146
2015-02-28

The influence of chemical composition of amide block on the thermal properties and structure of terpoly(ester-b-ether-b-amide) elastomers
R. Ukielski    R. Piątek   
690-694
2022-09-17

Elastomeric magnetic composites – physical properties and network structure
J. Kruželák    I. Hudec    R. Dosoudil   
25-32
2012-01-30

The influence of materials dosing order and shear forces on the properties of high density polyethylene/ground tire rubber blends obtained in co-rotating twin screw extruder
K. Formela    M Cysewska    J. Haponiuk   
324-332
2014-04-30

Preparation, structure and useful properties of poly(e-caprolactone)/layered silicates nanocomposites
J. Pigłowski    A. Kiersnowski    J. Dołęga   
704-715
2022-08-30

Evaluation of the physico-mechanical and electrical properties of styrene-butadiene rubber/aluminum powder and styrene-butadiene rubber/cerium sulfate composites
A. Nassar    A. A. Yehia    S. H. El-Sabbagh   
100-108
2015-02-28

Effect of "core-shell” polymeric nanofiller on the structure and properties of polylactide and thermoplastic corn starch blend
R. Jeziórska    A. Szadkowska    B. Świerz-Motysia    J. Kozakiewicz   
354-363
2012-05-30

The influence of cyclization and crosslinking on the properties and networks of photoinitiated multifunctional methacrylate polimers derived from succinic anhydride and their copolimers with styrene
M. Podgórski    J. Księżopolski    E. Chmielewska   
277-283
2010-04-30

The effect of various rapeseed oil-based polyols on selected properties of flexible polyurethane foams
E. Malewska    S. Bąk    M. Kurańska    A. Prociak   
799-806
2021-01-24

Effects of blow molding ratio on mechanical properties of polylactide nanocomposite films
M. Żenkiewicz    J. Richert    A. Różański   
869-876
2010-12-30

Influence of compounding processes and fibre length on the mechanical properties of abaca fibre-polypropylene composites
A. K. Bledzki    O. Faruk    A. A. Mamun   
120-125
2022-08-23

Modeling of the dynamic mechanical properties of the coagent reinforced row hydrogenated poly(butadiene-co-acrylonitrile) (HNBR) and the morphology of coagent nanodispersions in HNBR matrix
B. Likozar    M. Krajnc   
436-447
2022-08-18

Polyurethanes modified with functionalized silsesquioxane — synthesis and properties
K. Pielichowski    M. Jancia    E. Hebda    J. Pagacz    J. Pielichowski    B. Marciniec    A. Franczyk   
783-793
2013-10-30

Mechanical properties of polymer concretes containing different amount of hematite or colemanite
O. Gencel    W. Brostow    G. Martínez-Barrera    M. S. Gok   
276-283
2012-04-30

Polyurethane foams with purine rings
J. Lubczak   
595-600
2022-08-26

Silicone-containing hybrid polymer dispersions designed for coating applications
J. Kozakiewicz    M. Zielecka    A. Koncka-Foland    E. Bujnowska    A. Szulc   
124-132
2022-08-30

Thermal and mechanical properties of polyamide 12/modified carbon nanotubes composites prepared via the in situ ring-opening polymerization
I. Pełech    M. Kwiatkowska    A. Jędrzejewska    R. Pełech    I. Kowalczyk   
101-108
2021-01-15

Effect of fiber orientation and fiber loading on the mechanical and thermal properties of sugar palm yarn fiber reinforced unsaturated polyester resin composites
N. Mohd Nurazzi    A. Khalina    M. Chandrasekar    H.A. Aisyah    S. Ayu Rafiqah    R.A. Ilyas    Z.M. Hanafee   
115-124
2020-12-15

Influence of oil adsorption on the dynamic properties of vulcanates of natural rubber and natural rubber/butadiene-acrylonitrile mixtures
C. Dębek    J. Magryta   
201-207
2010-03-30

Studies on the effect of curing conditions on the curing rate and mechanical properties of moisture-cured poly(urethane-urea) elastomers containing oligocarbonate segments
J. Kozakiewicz    G. Rokicki    J. Przybylski    K. Sylwestrzak    P. G. Parzuchowski    K. M. Tomczyk   
564-570
2011-08-30

The effect of basalt knitted fabric on the properties of green epoxy resin
Hafsa Jamshaid    Abdul Waqar Rajput    Bilal Zahid    Sanam Memon    Raja Fahad Qureshi    Sarmad Aslam    Muhammad Nadeem   
67-71
2022-02-24

Mechanical properties of polypropylene copolymers composites filled with rapeseed straw
D. Paukszta    M. Szostak    M. Rogacz   
165-169
2014-02-28

Study on the process of preparation of polypropylene nanocomposite with montmorillonite
J. Gołębiewski    A. Różański    A. Gałęski   
374-381
2022-08-30

Effect of poly(ethylene terephthalate) and polyethylene comminution on the mechanical and thermal properties of polymer compositions
B. Królikowski   
752-759
2022-08-26

Thermal and dielectric properties of some epoxy compositions
O. Pokorska-Młodzińska    Z. Pokorska    M. Spadło   
127-130
2022-08-26

Polymer/clay nanocomposites
M. A. Nour   
326-331
2022-09-18

The effect of modified bentonites on the thixotropic properties of coating materials and their resistance against mold fungi settlement
M. Oleksy    K. Lecka-Szlachta    M. Heneczkowski    H. Galina   
562-568
2013-08-30

The improvement in properties of polyester resin-based composites using a new type of silane coupling agent
Włodzimierz Urbaniak    Wojciech Bednarek    Dominik Paukszta    Marek Szostak    Joanna Szymańska   
221-225
2023-07-13

Effect of composition and phase inversion in PET/LDPE and PET/PP blends on their mechanical and rheological properties and morphological structure
J. Janik    W. Królikowski   
250-255
2022-09-18

Effects of butanetetracarboxylic acid and chitosan on the properties of formaldehyde free finish for cotton fabrics
Z. Hehn    A. Gawdzik    J. Sajewicz   
463-467
2022-09-01

Synthesis and properties of biodegradable polylactide and thermoplastic starch blends
B. Świerz-Motysia    R. Jeziórska    A. Szadkowska    M. Piotrowska   
271-280
2011-04-30

Polypropylene composites with porous and solid structure reinforced with cut fibers
Jolanta Janik   
208-215
2020-12-15

Structural conditions of processing and application of elastomers
W. M. Rzymski   
100-106
2022-09-19

Effect of plasticizer with silanol groups on the structure and properties of polylactide and thermoplastic corn starch blend
A. Szadkowska    R. Jeziórska    M. Żubrowska    E. Spasówka    P. Rościszewski   
683-692
2021-01-24

The effect of natural Gongura roselle fiber on the mechanical properties of 3D printed ABS and PLA composites

Anandha Moorthy Appusamy    Natarajan Nanjappan    Prakash Eswaran    Madheswaran Subramanian   
119-124
2022-03-18

Fire resistance and mechanical properties of powder-epoxy composites reinforced with recycled glass fiber laminate
Rafał Oliwa    Katarzyna Bulanda    Mariusz Oleksy    Paulina Ostyńska    Grzegorz Budzik    Magdalena Płocińska    Sławomir Krauze   
280-288
2020-12-15

Synthesis, characterization, thermal and electrochemical properties of imine polymers containing pyridine and pyrimidine units
H. Karaer    I. Kaya    H. Aydın   
170-180
2021-01-15

Influence of UV on the self-adhesive properties of silicone pressure-sensitive adhesives
Adrian Krzysztof Antosik    Karolina Mozelewska    Konrad Gziut   
19-24
2023-01-19

Application of chitosan as sorbent of heavy metal ions
Z. Kułak    A. Niekraszewicz    H. Struszczyk   
48-52
2022-09-19

Nanocomposites of polypropylene and polyethylene with montmorillonite type clays
A. Pawlak    J. Morawiec    E. Piorkowska    A. Galeski   
240-247
2022-09-01

Supermolecular structure and selected properties of PA 6/LCO modified fibres
M. Bączek    J. Janicki   
637-644
2011-09-30

Application of ion bombardment to modify tribological properties of elastomers
D. M. Bieliński    U. Ostaszewska    J. Jagielski   
416-422
2021-08-27

Preparation, structure and properties of nanocomposite membranes prepared by phase inversion
Michał Adamczak    Gabriela Kamińska    Jolanta Bohdziewicz   
173-180
2021-01-12

Mechanical and thermal properties of rigid PVC and graphene nanocomposites obtained by melt–mixing
Sławomir Wilczewski    Katarzyna Skórczewska    Jolanta Tomaszewska    Krzysztof Lewandowski    Ömer Faruk Şentürk   
86-91
2024-03-07

EVA/zinc oxide nanocomposites for active food packaging: selected physical, and microbial properties
Haza Satar Majeed    Farah Khalaf Hammoud Al-Juboory    Raghad Hamid    Ruzniza Mohd Zawawi   
135-141
2023-03-30

Reactive compatibilization of polyester elastomer/polyamide 6 blends with oxazoline functionalized low-density polyethylene
R. Jeziórska   
291-297
2022-09-01

The influence of calcium carbonate and its modifications on the extrusion process and selected functional properties of polypropylene cast films
Arkadiusz Kloziński    Małgorzata Szczepańska    Paulina Jakubowska    Bronisław Samujło    Mateusz Barczewski    Grzegorz Lota   
509-521
2022-11-17

Studies on ethoxylated phenolic resins. Part. I. Surface characteristics and properties of coatings on metal
A.S. Mohamed    M.Z. Mohamed    E.M. Sadek    A.M. Motawie   
398-403
2022-09-01

Comparison of thermal, structural and morphological properties of poly(l-lactide) and poly(l-lactide)/ hydroxyapatite microspheres for laser sintering processes
Anna Krokos    Agnieszka Bondyra    Ryszard Kwiatkowski    Piotr Gruber    Michał Olejarczyk    Bogusz Stępak    Paulina Dzienny    Bartłomiej Kryszak    Małgorzata Gazińska    Arkadiusz Antończak   
605-612
2020-12-16

Selected properties of polypropylene composites with shungite
M. Żenkiewicz    J. Richert    P. Rytlewski    K. Moraczewski    M. Stepczyńska   
119-126
2020-02-28

Intelligent magnetorheological elastomer composites
A. Boczkowska    S. Awietjan   
443-449
2013-06-30

The effect of hollow glass microspheres on the properties of high silica glass fiber fabric/liquid silicone rubber composite sheet
S. Chen    Y. Qin    Y. Song    B. Wang   
178-184
2021-01-13

Study of structure and fatigue strength of thermoplastic elastomers modified with nanoparticles and radiation-crosslinked
M. Rybko    M. El Fray   
400-408
2014-05-30

Preparation and characteristics of polypropylene composites
Z. Majchrzak    J. Lipczyński   
190-194
2022-08-26

Effect of glycerol on the properties of coconut oil cake reinforced poly(lactic acid)

Sachin Sumathy Raj    Thiruvasagam Chellapandian    Balakrishnan Nanjappan   
61-66
2022-02-24

Effect of oxazoline grafted polyethylene on the structure and properties of poly(butylene terephthalate)/polyamide 6 blends
R. Jeziórska   
350-355
2022-09-01

The effect of zinc oxide on the properties of ethylene—propylene rubbers
M. Zaborski    M. Owczarek    J. Leo   
678-683
2022-09-19

Effects of chemical and supermolecular structures on mechanical properties of polyurethane/unsaturated polyester compositions of interpenetrating polymer networks types
P. Król    J. Wojturska   
790-800
2022-09-01

Organosilicon polymer for the release of antimicrobial drugs
Sara Sarraj    Małgorzata Szymiczek   
149-157
2022-05-13

Improving the mechanical performance of PLA composites with natural, man-made cellulose and glass fibers — a comparison to PP counterparts
A. Jaszkiewicz    A. K. Bledzki    P. Franciszczak   
435-442
2013-06-30

Polyamide/spherical nanosilica nanocomposites
R. Jeziórska    B. Świerz-Motysia    M. Zielecka    M. Studziński   
727-736
2022-08-18

Effect of thermooxidative and photooxidative ageing processes on mechanical properties of magnetorheological elastomer composites
M. Masłowski    M. Zaborski   
264-271
2015-04-30

Influence of fiber reinforcement towards the physical characteristics of low density polyethylene laminated composites
S. Ravichandran    A. Daniel Raj    P. Balaji Visvanath    Faruq Mohammad    Hamad A. Al-Lohedan    Suresh Sagadevan   
449-457
2020-12-16

Halloysite nanotubes as polyolefin fillers
K. Szpilska    K. Czaja    S. Kudła   
359-371
2015-06-30

Effect of extruder parameters on mechanical properties of revulcanized ground rubber tire powder
B. Maridass    B. R. Gupta   
456-460
2022-08-26

Polymer compositions based on butoxylated melamine-formaldehyde resin modified with urethane prepolymers with isocyanate end-groups
A. Żmihorska-Gotfryd   
280-287
2022-09-17

Polyamides from renewable sources as matrices of short fiber reinforced biocomposites
S. Kuciel    P. Koźniar    A. Liber-Kneć   
627-634
2012-09-30

Characterization of maleated vegetable oils for insulation purposes and agricultural applications
M. A. Saied    S. H. Mansour    A. A. Ward    I. S. Rahim    H. A. Zayed    A. L. Saad    K. N. Abdel Nour   
729-738
2014-10-30

Influence of structure on piezoelectric properties of polypropylene-montmorillonite electrets
Bogusław Królikowski    Halina Kaczmarek    Ewa Klimiec    Marta Chylińska    Dagmara Bajer   
493-498
2021-01-12

Mechanical and rheological properties of polyethylene compositions with vegetable fibres
R. Steller    W. Meissner   
332-338
2022-09-18

Mechanical properties and resistance to oxidation tests of cable polyethylene modified with plasma carbon black
T. Zieliński    J. Kijeński    K. Bajdor   
339-342
2022-09-01

Study on the mechanical properties and structure of the compounds of PE/PVC recyclates filled with wood flour
J. Tomaszewska    S. Zajchowski   
106-113
2013-02-28

Effect of the content of rigid segments on the properties of polycarbonate urethanes for use in intervertebral disc implants
M. Auguścik    B. Waśniewski    M. Krzyżowska    J. Dąbrowski    J. Ryszkowska    W. Karalus   
551-558
2015-09-30

PA 10.10 and PA 6 composites with glass or basalt fibre: mechanical properties in dry and wet state
Paulina Romańska    Stanisław Kuciel   
159-166
2024-04-16

Influence of natural fillers on the thermal and mechanical properties of epoxy resin composites
Karolina Młynarczyk    Filip Longwic    Beata Podkościelna    Tomasz Klepka   
102-109
2022-03-28

Polymer blends PET/PE-LD and PET/PP with a new compatibilizer
J. Janik    S. Lenart    W. Królikowski    P. Penczek   
432-441
2022-09-01

Models of changes in the functional properties of polyolefin packaging films
M. Lisińska-Kuśnierz    A. Cholewa-Wójcik   
801-808
2011-12-30

Estimation of mechanical (static and dynamic) properties of recycled polypropylene filled with wood flour
A. Liber-Kneć    S. Kuciel    W. Dziadur   
571-575
2022-08-30

Effect of TEOS on the rheological properties of polyvinylidene fluoride and poly(vinylidene fluoride-co-hexafluoropropylene)
Monis Bin Abid    Lassaad Gzara    Iqbal Ahmed Moujdin    Mohamed Abdel Salam    Roswanira Abdul Wahab   
44-51
2024-01-12

From the nature of zirconocene/activator catalysts to polymerization performance and polyethylene properties
N. M. Bravaya    N. Panin    O. N. Babkina    N. D. Karpova   
397-401
2022-09-19

Effect of halogen free modification of epoxy resins on their fire retardancy levels
E. Kicko-Walczak    P. Jankowski   
860-867
2022-09-01

The influence of hard segment crosslinking on the morphology and mechanical properties of segmented poly(ester-urethanes)
H. Janik    J. Vancso   
139-142
2022-09-01

The effect of plasticizers and chitosan concentration on the structure and properties of Gracilaria sp.-based thin films for food packaging purpose
M. Zulham Efendi Sinaga    Saharman Gea    Cut Fatimah Zuhra    Yuan Alfinsyah Sihombing    Emma Zaidar    Firman Sebayang    Tya Utari Ningsih   
2021-02-17

Mechanical properties of colored acrylonitrile-butadiene-styrene injection molded parts
M. Trzaskalska    P. Palutkiewicz    E. Bociąga   
791-798
2021-01-13

Rice starch as a polymer sorbent of iron cations
Beata Schmidt    Adrian Zubala   
473-479
2023-10-31

Limitation of smoke emission properties of plastics
J. Garbarski    M. Fabijański   
283-286
2022-09-01

Comparison of the effect of chosen commercial suspension stabilizers on some properties of poly(vinyl chloride). Part 1, Effect on grain size distribution
A. Abramowicz   
593-600
2022-09-01

Methods of forecasting of the changes of polymeric products properties
T. Jachowicz    R. Sikora   
177-185
2022-08-30

Effect of particle size and particle surface pretreatment of fillers on selected properties of model ceramic-polymer composites used as dental fillings
J. Siejka-Kulczyk    M. Lewandowska    J. Kurzydłowski   
208-212
2022-08-24

Innovative oligomeric poly(vinyl chloride) plasticizers for specialized applications
Marek Lewandowski    Kazimierz Piszczek    Marta Pieńkowska    Krzysztof Lewandowski   
550-556
2020-12-16

Properties of high impact polystyrene flame retarded by magnesium hydroxide and modified with triblock copolymer styrene/butadiene/styrene
J. Garbarski    M. Fabijański   
190-195
2022-09-01

Glass transition temperature-temperature-property (TgTP) diagram for EPY® epoxy system
M. Urbaniak   
537-543
2022-08-23

Effect of maleated linear low density polyethylene on the structure and mechanical properties of terpolymer acrylonitryle-butadiene-styrene based blend wastes
R. Jeziórska    A. Szadkowska    A. Abramowicz   
705-713
2012-10-30

The impact of reduced graphene oxide on the properties of polyamide 6
Maziyar Sabet    Seyednooroldin Hosseini   
224-233
2021-05-07

Mechanical and thermal properties of cotton-bamboo fabric/glass fiber epoxy composites
Kailasam Chandrasekaran    Periyasamy Shanmugam     Palanisamy Senthilkumar   
567-574
2023-01-02

Modification of thermoplastic polymers with scrap paper cellulose fibres. Part II. Modification of polyolefins with scrap paper cellulose fibres
E. Kowalska    J. Pełka   
268-275
2022-09-19

Properties of butadiene-acrylonitrile rubber containing precipitated aminoacid modified chalk
M. Zaborski    M. Lipińska   
428-435
2022-09-18

Effect of chemical modification of poly(butylene tere-phthalate) on flexible properties
R. Ukielski    F. Lembicz   
784-789
2022-09-17

The influence of ceramic admixture on physical and chemical properties of surgical cement
A. Balin    J. Myalski    G. Pucka    J. Toborek   
852-858
2022-08-30

Properties of polypropylene composites filled with microsilica waste
Artur Kościuszko    Piotr Czyżewski    Łukasz Wajer    Adrian Ościak    Marek Bieliński   
99-104
2020-12-15

Modifiers applied in polymer recycling: processing, properties and application
R. Jeziórska    B. Świerz-Motysia    A. Szadkowska   
748-756
2010-10-30

Mechanical and electrical properties of acrylonitrile-butadiene rubber filled with treated nanographite
D. E. El-Nashar    N. N. Rozik    S. L. Abd El-Messieh   
834-844
2014-12-30

Analysis of thermomechanical properties and morphology of polyethylene pipes after aging by UV radiation
A. Gnatowski    M Chyra    W. Baranowski   
308-313
2014-04-30

Investigation of Fe304/AEAP supermagnetic nanoparticles on the morphological, thermal and magnetite behavior of polyurethane rigid foam nanocomposites
M. M. A. Nikje    M. Noruzian    S. T. Moghaddam   
26-32
2015-01-30

Tribological properties of biodegradable polyurethanes of various structure and content of rigid elements
W. Karalus    J. R. Dąbrowski    M. Auguścik    J. Ryszkowska   
509-518
2021-01-24

Polyolefins filled with waste rigid polyurethane foam and compatibilized by solid-state shear pulverization during extrusion
R. Steller    G. Kędziora    G. Mitchener    K. Fiłon    R. Kołbuc    K. Lenart    J. Śliwiński   
s. 181-186
2021-01-15

Physicochemical and mechanical properties of natural cellulosic fiber from Coccinia Indica and its epoxy composites
M. Bhuvaneshwaran    P. S. Sampath    S. Balu    S. Sagadevan   
656-664
2021-01-12

Analysis of mechanical properties and distribution of deformation during the shear of polymer-fiber composites containing flame retardants
Rafał Oliwa    Katarzyna Bulanda    Mariusz Oleksy    Grzegorz Budzik    Sławomir Krauze   
387-393
2020-12-15

Thermal properties of porous sodium polyacrylate/silica nanocomposites
Alina Korobeinyk    Gabriella Yurchenko    Alexander Matkovsky    Valentin Tertykh   
106-112
2023-02-28

Structure, thermal and mechanical properties of polypropylene composites with nano- and micro-diamonds
A. Zubrowska    R. Masirek    E. Piorkowska    L. Pietrzak   
331-336
2015-05-30

Surface modification of methylvinylsilicone rubber vulcanizates with polyhedral oligomeric silsesquioxanes functionalized using chloride groups (POSS-Cl)
A. Strąkowska    A. Kosmalska    M. Zaborski   
272-278
2021-01-24

Effect of surface modification by acetone vaporization on the structure of 3D printed acrylonitrile-butadiene-styrene elements
D. Marciniak    P. Szewczykowski    P. Czyżewski    D. Sykutera    M. Bieliński   
785-790
2021-01-13

Some properties and applications of radiation modified polymeric materials
M. Żenkiewicz   
668-677
2022-09-17

Effect of poly(butylene terephthalate) functionalized with 2,2'-(1,3-phenylene)-bis(2-oxazoline) on the structure and properties of polyamide 6 blends with textile waste containing poly(ethylene terephthalate)
R. Jeziórska   
201-207
2022-08-24

The influence of synthetic polyhydroxybutyrate on selected properties of novel polyurethanes for applications in medicine. Part II. Polyurethanes containing cycloaliphatic diisocyanates in the hard segment
J. Brzeska    P. Dacko    H. Janeczek    M. Kowalczuk    H. Janik    M. Rutkowska   
27-34
2011-01-30

Percolation behavior and mehanical properties of polycarbonate composites filled with carbon black/carbon nanotube systems
P. Pötschke    M. H. Arnaldo    H.-J. Radusch   
204-211
2012-03-30

Study on mechanical properties of the crosslinked with isocyanates product of the reaction of modified soybean oil with epoxy resin
P. Czub    P. Kasza   
466-476
2014-06-30

Developments in aqueous polyurethane and polyurethane-acrylic dispersion technology. Part II. Polyurethane-acrylic dispersions and modification of polyurethane and polyurethane-acrylic dispersions
J. Kozakiewicz   
81-91
2021-01-24

Innovative method to prepare polyester polyols intended for the production of footwear soles
Paulina Biniecka    Marta Pieńkowska    Anna Opalska   
199-207
2021-01-12

Influence of the preparation method on selected properties of PLA nanofibers modified with lavender oil
Tuğba Güngör Ertuğral   
112-116
2024-03-27

Effects of stress and biological environment on polymeric implants' durability
J. Chłopek   
182-189
2022-09-01

The influence of synthetic polyhydroxybutyrate on selected properties of novel polyurethanes for medical applications. Part I. Polyurethanes with aromatic diisocyanates in hard segments
J. Brzeska    P. Dacko    H. Janeczek    M. Kowalczuk    H. Janik    M. Rutkowska   
41-46
2021-08-31

Effect of modifiers on the flammability and physical properties of polyamide 6
K. Kelar    B. Jurkowski    K. Mencel   
365-370
2013-05-30

Preparation and properties of polyurethane/functionalized multi-walled carbon nanotubes rigid foam nanocomposites
M. M. A. Nikje    A. Yaghoubi   
776-782
2014-12-30

The impact of addition of xanthan gum and guar gum on rheological properties of foams produced by continuous method
Maciej Kabziński    Krzysztof Neupauer    Marcelina Nowak    Joanna Kruk    Kacper Kaczmarczyk   
538-541
2021-01-12

Selected structural parameters and thermal and mechanical properties of blends of poly(ethylene terephthalate), isotactic polypropylene grafted with ricinyl-2-oxazoline maleate and polycarbonate (PET/i-PP-g-MRO/PC)
R. Jeziórska   
414-422
2022-09-18

Properties of polymer composites with copper powders or flakes as fillers
P. Łoś    A. Łukomska    S. Kowalska    R. Jeziórska    J. Krupka   
338-346
2012-05-30

Epoxy resins modified with palm oil derivatives — preparation and properties
P. Czub    I. Franek   
135-139
2013-02-28

The influence of blowing agents type on foaming process and properties of rigid polyurethane foams
M. Kurańska    A. Prociak    S. Michałowski    A. Zawadzińska   
672-678
2021-01-13

Study on the properties of polyester composites reinforced by glass and natural fibers
J. Jaszewski    S. Zajchowski    J. Tomaszewska    J. Mirowski   
109-114
2021-01-13

Some aspects of studies on the preparation of solid thermosetting polyester molding compounds
W. Nowaczek    W. Królikowski    P. Penczek    J. Rosińska    Z. Bończa-Tomaszewski   
813-818
2022-09-01

Poly(vinyl chloride) gelation in rolling process
K. Piszczek   
441-448
2022-09-01

Mechanical properties of vulcanizates of NR/NBR blends swelled by motor oil
C. Dębek    J. Magryta    D. Dębek   
58-65
2022-08-30

Polycarbonate/maleic anhydride grafted polyethylene/graphite composites
R. Jeziórska    T. Klepka    D. Paukszta   
294-298
2022-08-26

Właściwości przetwórcze i użytkowe pojemników wytwarzanych w procesie wytłaczania z rozdmuchiwaniem w zmiennych warunkach przetwórstwa - ocena wydajności i jakości procesu
K. Pepliński    M. Bieliński   
448-456
2022-08-18

Effect of resin modification on the impact strength of glass-polyester composites
M. Barcikowski    W. Królikowski   
450-460
2013-06-30

Hyperelastic behavior of two rubber materials under quasistatic and dynamic compressive loadings — testing, modeling and application
Y. Mao    Y. Li    Y. Chen    Y. Miao    Q. Deng    W. Niu   
516-522
2015-08-30

The influence of intramolecular cyclization and intermolecular cross-linking on the properties of polimeric networks obtained in the radical polimerization of multifunctional methacrylates
M. Podgórski    J. Księżopolski   
518-523
2010-08-30

Rheological properties of polypropylene composites with calcium carbonate under high shear rates
Arkadiusz Kloziński    Krzysztof Lewandowski    Jacek Mirowski    Mateusz Barczewski    Paulina Jakubowska   
403-412
2023-10-18

The physicochemical characterization of fluoropolymer-modified polysiloxane coatings
Z. Dobkowski    M. Zielecka   
835-839
2022-09-19

Epoxy-carbazole compositions. Part I. Compositions with 9-(2, 3-epoxypropyl) carbazole
P. Czub    W. Mazela    J. Pielichowski   
641-644
2022-09-17

Modification of the structure and properties of polyketanils for applications in optoelectronics
A. Iwan    D. Sęk   
581-586
2022-09-01

Influence of storage time on the useful properties of silicone pressure-sensitive adhesives
Adrian Krzysztof Antosik    Karolina Mozelewska    
317-323
2022-08-22

Wood filled high density polyethylene composites with nanosilica containing immobilized nanosilver
R. Jeziórska    M. Zielecka    A. Szadkowska    M. Wenda    L. Tokarz   
192-203
2012-03-30

Structure and selected properties of polyamide 6/organophilized montmorillonite nanocomposites
K. Szustakiewicz    K. Steller    J. Pigłowski   
550-556
2013-08-30

Polyester vascular prostheses — antibacterial and athrombogenic biomaterials. Part II. Effect of two-stage modification of polyester vascular prostheses on the selected physicochemical, mechanical and microbiological properties
A. Karaszewska    J. Bucheńska   
33-38
2013-01-30

Antimicrobial properties of chitosan solutions, chitosan films and gelatin-chitosan films
E. Malinowska-Pańczyk    H. Staroszczyk    K. Gottfried    I. Kołodziejska    A. Wojtasz-Pająk   
735-741
2015-12-30

Functionalized nanofiller for polymers – preparation, properties and application
E. Wierzbicka    I. Legocka    E. Wardzińska-Jarmulska    B. Szczepaniak    M. Krzyżewski   
670-676
2021-01-24

Ionogels – materials containing immobilized ionic liquids
E. Andrzejewska    A. Marcinkowska    A. Zgrzeba   
344-352
2021-01-15

Mechanical properties of kenaf fiber thermoplastic polyurethane-natural rubber composites
A. M. Noor Azammi    S. M. Sapuan    M. R. Ishak    M. T. H. Sultan   
524-530
2021-01-13

A preliminary study on the new thermoplastic vulcanizates
B. Świerz-Motysia    B. Jurkiewicz    M. Rajkiewicz   
203-209
2022-08-26

The morphology and mechanical properties of recyclated polyethylene/polyamide laminate
M. Jastrzębska    M. Rutkowska    H. Janik    S. Jose    S. Thomas   
801-805
2022-08-18

Effect of batched water exposed to a constant magnetic field on the properties of concrete filled with waste fly ash, phosphogypsum and starch
Ewa Miękoś    Tomasz Klepka    Marek Zieliński    Dariusz Sroczyński    Łukasz Garbacz    Anna Fenyk    Anna Łukawska   
53-60
2022-02-19

Study of the effect of polymer network structure on thermal and mechanical properties of crosslinked (meth)acrylates - cis-hexahydrophthalic anhydride derivatives
M. Podgórski    J. Księżopolski   
33-40
2021-08-31

Influence of 2,4,6-trimethylphenol on the yield of synthesis and properties of poly(phenylene oxide)
S. Firlik    Z. Wielgosz    S. Pawlowski    L. Tokarz    J. Stasinski    K. Suwala   
201-206
2014-03-30

Effect of UV-VIS radiation on the thermomechanical properties and structure of dyed PLA film
M. Stepczyńska   
385-390
2015-06-30

Bioactivity of Baltic amber – fossil resin
P. Tumiłowicz    L. Synoradzki    A. Sobiecka    J. Arct    K. Pytkowska    S. Safarzyński   
347-356
2021-01-24

p-Nonylphenol/o-cresol/cyclohexanone/formaldehyde resins as modifiers in pressure sensitive compositions
S. Mustata    I. Bicu   
774-778
2022-09-17

Effects of electron radiation and styrene elastomer on some mechanical properties of polymer composites
M. Żenkiewicz    J. Polański    T. Karasiewicz    J. Czupryńska    W. Engelgard   
297-303
2022-08-23

Thermal properties of crosslinked blends chlorosulfonated polyethylene and styrene-butadiene rubber
G. Janowska    A. Kucharska    J. Kawałek    W. M. Rzymski   
648-653
2022-08-18

Synthesis and application of oligomers obtained from oxamic acid and ethylene carbonate
I. Zarzyka-Niemiec   
106-113
2009-02-12

Rheological properties of mixed gels of oat ß-glucan and whey proteins
W. Gustaw    D. Szwajgier   
284-289
2012-04-30

Physical properties of permanent magnets for magnetic circuits of electric machines
B. Ślusarek    M. Karbowiak    B. Jankowski    D. Kapelski    M. Przybylski   
127-134
2013-02-28

Properties of poly(acrylic acid)/modified starch compositions applied as a new polymeric binders
B. Grabowska    B. Pilch-Pitera    K. Kaczmarska    B. Trzebicka    B. Mendrek    D. Drożyński    P. Łątka   
179-185
2015-03-30

Application of in-line measurement technique for evaluation of rheological properties of polyethylene/calcium carbonate composites
A. Kloziński   
788-798
2021-01-24

Calcium lignosulfonate as eco-friendly additive for crosslinking fibrous composites with phenol-formaldehyde resin matrix
Ł. Klapiszewski    R. Oliwa    M. Oleksy    T. Jesionowski   
102-108
2021-01-13

The effect of modified biopolymers and poly(vinyl alcohol) on carboxylated acrylonitrile-butadiene rubber properties
M. Prochoń    Y. H. Tshela Ntumba   
508-515
2015-08-30

The influence of the addition of ionic liquids on the properties of rubber-coated fabrics filled with layered fillers
Tomasz Gozdek    Joanna Chudzik    Mateusz Imiela    Dariusz M. Bieliński   
609-615
2021-01-12

A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers. Part I
Paweł Wawrzyniak    Waldemar Karaszewski   
346-356
2020-12-15

Thermal and physico-mechanical properties of biodegradable materials based on polyhydroxyalkanoates
Igor Semeniuk     Viktoria Kochubei    Elena Karpenko    Yuriy Melnyk    Volodymyr Skorokhoda    Natalia Semenyuk   
561-566
2023-01-02

Crosslinking of the acrylic pressure-sensitive adhesives using polycarbodiimides
Z. Czech   
56-59
2022-08-26

Antimicrobial sustainable biopolymers for biomedical plastics applications – an overview
Nur Syifaa Razak    Rahmah Mohamed   
574-583
2021-12-23

Blends of novolac resins with epoxidized elastomers
R. Steller    D. Żuchowska    W. Meissner    G. Kędziora   
470-479
2012-06-30

Influence of active compounds on the degradation of polylactide biocomposites
Magdalena Stepczyńska   
410-416
2021-01-12

Aging behavior of three-proof polyurethane coatings under UV radiation
Jianfa Wang    Zheng Gu    Jie Zhao    Susu Zhang    Peiyao Li    Chao Meng    Jinyong Sui    Xiaoyi Zhang    Shaokai Hu    Jiaying Pan    Junyi Li   
433-442
2022-09-29

The effect of compatibilization in reactive processing low density polyethylene/polyamide 6/EPDM blends
R. N. Darie    C. Vasile    M. Kozłowski   
656-661
2022-08-30

Study on the effects of urethane-dimethacrylates' structures on the morphology and properties of polymers based on them
I. Barszczewska-Rybarek   
190-194
2022-08-24

Adhesive properties of low molecular weight polymer modified with nanosilica and disintegrated ultrasonically for application in waterproofing ceramics
S. Fic    M. Kłonica    A. Szewczak   
730-734
2015-12-30

Modification of light-curable dental composite with selected polyhedral oligomeric silsesquioxanes
K. Bociong    M. Krasowski    A. Szczesio    R. Anyszka    K. Kalicka    J. Sokołowski   
515-523
2021-01-13

Recycling of ABS operating elements obtained from industry 3D printing machines
Dawid Marciniak    Piotr Czyżewski    Dariusz Sykutera    Marek Bieliński   
803-810
2021-01-12

Rheological and thermal properties of epoxy resins obtained from epichlorohydrin and m- or p-aminophenol, cured with triethylenetetraamine
F. Mustata    J. Bicu   
717-721
2022-09-18

Effect of ricinol-2-oxazoline methylmaleate on the structure and properties of polyamide 6 and low density polyethylene blends
R. Jeziórska   
623-633
2022-09-01

Rheological behavior of fiber-filled polymer melts at low shear rate. Part. 1, Modeling of rheological properties
B. Hausnerova    N. Honkova    A. Lengalova    T. Kitano    P. Saha   
507-512
2022-08-23

Properties of poly(lactic acid)/Ecoflex rigid foil sheets applied in thermof orming process
K. Bajer    R. Malinowski    D. Bajer    S. Richert   
591-593
2010-08-30

Assessment with indentation techniques of the local mechanical behavior of joints in polymer parts
R Lach    P Hutař    P Veselý    E Nezbedová    Z Knésl    T Koch    C Bierögel    W Grellmann   
900-905
2013-12-30

Modification of low density polyethylene for manufacturing of oxo-biodegradable films
R. Machlarz    M. Heneczkowski   
754-759
2014-10-30

Synthesis of polystyrene-b-polyurethane-b-polystyrene copolymers through ARGET ATRP polymerization method. Part II. Chemical structure, thermal and surface properties
P. Król    P. Chmielarz   
377-384
2015-06-30

Effect of radiation source distance on the properties of dental fillings
Jolanta Świderska    Waldemar Świderski    Adrian Antosik   
509-513
2021-01-12

Influence of chemical foaming on the structure and selected properties of glass fiber reinforced PA6
Natalia Konczal    Bartosz Nowinka    Marek Bieliński   
475-482
2022-11-17

Coating materials obtained from polyurethane cationomers modified with functionalized silsequioxanes. Part II. Practical properties
B. Król    P. Król   
855-862
2010-12-30

Polyols from recycled poly(ethylene terephthalate) flakes and rapeseed oil for polyurethane foams
A. Paberza    A. Fridrihsone-Girone    A. Abolins    U. Cabulis   
572-578
2015-09-30

Epoxy resin compositions containing liquid phosphorus flame retardants used in infusion technology
Rafał Oliwa   
578-581
2020-12-16

The properties of polyamide 6—isotactic polypropylene modified mixtures
J. Pigłowski    J. Bandurski    K. Jurkowski   
693-700
2022-09-21

Influence of the synthesis conditions on the properties of low molecular weight epoxy resin
P. Król    B. Król    E. Dziwiński   
549-556
2022-09-17

Effect of selected auxiliary agents on the properties of surface layer of extruded polyethylene
T. Garbacz   
23-28
2022-09-01

Effect of modification of binders with SBS elastomer on their properties
P. Radziszewski   
559-563
2022-08-23

Synthesis and properties of new polyurethane elastomers: influence of hard segment structure
S. Oprea   
111-117
2020-02-28

Improvement of barrier properties of glycol modified poly(ethylene terephthalate) based nanocomposites containing graphene derivatives forms
S. Paszkiewicz    P. Kochmański    A. Kochmańska    R. Fryczkowski    M. Sieradzka    A. Bartkowiak    S. Lisiecki    M. Jotko    E. Piesowicz    I. Irska    D. Pawlikowska    A. Szymczyk    Z. Rosłaniec   
868-874
2021-01-15

Thermal and mechanical properties of PLA/ENR thermoplastic vulcanizates compatibilized with tetrafunctional double-decker silsesquioxanes

Sandra Paszkiewicz    Grzegorz Kramek    Konrad Walkowiak    Izabela Irska    Elżbieta Piesowicz    Monika Rzonsowska    Beata Dudziec    Mateusz Barczewski   
593-606
2024-01-04

Synthesis and properties of polyphenylenes
E. Hałasa   
1-7
2022-09-18

Influence of molecular weight on dielectric properties and piezoelectric constant of poly(vinylidene fluoride) membranes obtained by electrospinning
Aminatul Sobirah Zahari    Muhammad Hafiz Mazwir    Izan Izwan Misnon   
532-537
2021-11-24

The effect of extrusion conditions for a screw-disk plasticizing system on the mechanical properties of wood-polymer composites (WPC)
I. Michalska-Pożoga    T. Rydzkowski   
202-210
2021-01-24

Rigid polyurethane foams with antibacterial properties modified with pine oil
Anna Strąkowska    Sylwia Członka    Karolina Miedzińska    Krzysztof Strzelec   
691--697
2020-12-16

Selected methodological problems in measuring the adhesive properties of surface layer
J. Kuczmaszewski   
792-798
2022-09-19

Rheological behavior of fibre-filled polymer melts at low shear rate. Pt. 2, Experimental investigation
B. Hausnerova    N. Honkova    A. Lengalova    T. Kitano    P. Saha   
649-656
2022-08-23

Epoxy compositions with use of modified vegetable oils
P. Czub   
182-189
2022-08-24

The influence of cellular T8 oligosilsesquioxanes on mechanical properties of silicone rubber
A. Wojtas    M. Zaborski    A. Kosmalska   
208-214
2010-03-30

Synthesis, properties and applications of new (bio)degradable polyester urethanes
J. Brzeska    P. Dacko    H. Janeczek    H. Janik    W. Sikorska    M. Rutkowska    M. Kowalczuk   
365-371
2014-05-30

Effect of selected vegetable oils on the properties of acrylonitrile-butadiene rubber vulcanizates
A. I. Khalaf    A. A. Ward    A. E. Abd El-Kader    S. H. El-Sabbagh   
43—56
2015-01-30

Poly(butylene terephthalate/carbon nanotubes nanocomposites. Part II. Structure and properties
E. Piesowicz    I. Irska    K. Bryll    K. Gawdzińska    M. Bratychak   
24-30
2021-01-24

Attempts at ultrasonic-based modeling of selected properties of multiblock elastomers
F. Lembicz   
536-541
2022-09-21

Curing of epoxy resin with hyperbranched polyamide
E. Schab-Balcerzak    M.-A. Kakimoto   
262-265
2022-09-01

Effect of high shear rate on the mechanical properties of polyethylene, poly(ethylene terephthalate), polystyrene and polypropylene waste blend

Mohd Adly Rahmat Saat    Rozaidi Rasid   
72-75
2022-02-24

Assessment of influence of extrusion method on selected properties of wood-polymer composites using Taguchi method of experiment planning
I. Michalska-Pożoga    S. Węgrzyk    T. Rydzkowski   
686-692
2021-01-15

Properties of ZnO/SiO2 cross-linked butadiene-acrylonitrile rubber
M. Zaborski    M. Owczarek    T. Paryjczak    A. Kaźmierczak   
339-346
2022-09-18

Modification of epoxy-novolak compositions with reactive rubbers and coal as a filler
U. Szeluga    L. Kurzeja    H. Galina   
809-816
2022-08-30

Magnetorheological urethane elastomers activated by magnetic field
A. Boczkowska    S. Awietjan   
26-30
2009-01-10

The influence of surfactants and ionic liquids on the mechanical and magnetic properties
M. Masłowski    M. Zaborski   
743-748
2011-10-30

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions
K. Formela    M. Bogucki   
488-494
2014-06-30

Effect of ionic liquids on the selected properties of magnetic composites filled with micro-sized iron oxide (Fe3O4)
M. Masłowski    A. Strąkowska    M. Pingot    M. Zaborski   
117-124
2021-01-24

Effect of thermal aging on the crystalline structure and mechanical performance of fully bio-based, furan-ester, multiblock copolymers
M. Kwiatkowska    I. Kowalczyk    A. Szymczyk    K. Gorący   
594-602
2021-01-13

Study on the influence of mineral powder fillers modification on the selected mechanical properties of linear low-density polyethylene
M. Gościański    H. Maciejewski    J. Guliński    H. Leda   
15-22
2022-09-01

Effect of montmorillonite modification on rheological properties of organic coating systems containing MMT
H. Kuczyńska    E. Kamińska-Tarnawska    E. Majkrzak. P.   
551-558
2022-08-23

Effects of blowing agent content and injection moulding conditions on selected properties and surface quality of polypropylene moulded parts
E. Bociąga    P. Palutkiewicz   
38-48
2012-01-30

The effect of nanosilica filler on the foaming process and properties of flexible polyurethane foams obtained with rapeseed oil-based polyol
E. Malewska    A. Prociak   
472-479
2015-08-30

Investigations on the properties of an acrylamide-modified melamine resin. Part II. Prediction of polymer properties
B. Dębska    E. Wianowska   
288-292
2022-09-21

Compatibilization, processing and properties of post-consumer PET/polyolefin blends
A. Pawlak    J. Morawiec    A. Gałęski   
491-499
2022-09-18

Recent advances in the synthesis and applications of poly(1,4-dioxan-2-one)based copolymers
J.-M. Raquez    O. Coulembier    A. Duda    R. Narayan    P. Dubois   
163-178
2009-03-15

Biocomposites based on PHB filled with wood or kenaf fibers
S. Kuciel    A. Liber-Kneć   
218-223
2011-03-30

Thermal and dielectric properties of silsesquioxanes containing mesogenic azo groups
B. Mossety-Leszczak    M. Włodarska    H. Galina    M. Dutkiewicz   
733-740
2013-10-30

Crosslinking process and properties of unconventional blends of chloroprene rubber and partially hydrogenated acrylonitrile-butadiene rubber
P. Dmowska-Jasek    W. M. Rzymski    A. Smejda-Krzewicka   
189-194
2021-01-24

Study on the rheological properties of microcrystalline chitosan hydrogels used as drug carriers
K. H. Bodek   
818-825
2022-09-21

Biodegradable copolyester/starch blends - preparation, mechanical properties, wettability, biodegradation course
J. Turečková    I. Prokopová    P. Niklová    J. Šimek    P. Šmejkalová    F. Keclík   
639-643
2022-08-23

Utilization of thermoplastic polymer waste in blends with petroleum bitumen fractions
J. Zieliński    E. Gurdzińska    B. Osowiecka    T. Brzozowska    W. Ciesińska   
773-781
2010-10-30

Mechanical and electrical properties of acrylonitrile-butadiene rubber filled with crosslinked polystyrene prepared by emulsion polymerization
N. N. Rozik    S. H. El-Hamouly    E. S. Shafik    A. F. Younan    S. L. Abd-El Messieh   
33—42
2015-01-30

Selected geometrical features and strength indicators of elements manufactured by fused deposition modeling technology
K. Pepliński    P. Czyżewski    D. Górecki    D. Sykutera    M. Bieliński   
198-207
2021-01-15

Utilization of glass fiber-reinforced polyester laminate wastes
E. Kowalska    T. Wielgosz    T. Bartczak   
110-116
2022-09-18

Recovery of mechanical properties of aged polystyrene after reprocessing
A. Shyichuk    K. Piszczek    J. Rokitnicka   
382-385
2022-08-30

The influence of expandable polystyrene fillers on properties of water-blown rigid polyurethane foams
E. Malewska    M. Trzyna    A. Sabanowska    A. Prociak    P. Koniorczyk   
865-868
2011-12-30

Effect of urea, sodium nitrate and ethylene glycol addition on the rheological properties of corn starch pastes
A. Makowska    P. Kubiak    W. Białas    G. Lewandowicz   
343-350
2015-05-30

Green thermoplastic poly(ether-urethane)s – synthesis, chemical structure and selected properties investigation
Paulina Kasprzyk    Kamila Błażek    Paulina Parcheta    Janusz Datta   
672—680
2020-12-16

Potato starch plasticization by natural deep eutectic solvent
Dorota Skowrońska    Katarzyna Wilpiszewska   
480-486
2023-10-25

Study on the properties of new in-situ curable biomaterials crosslinked with methacrylic anhydride
J. Łukaszczyk    M. Śmiga-Matuszowicz    K. Jaszcz    M. Kaczmarek   
213-218
2022-08-24

Poly(vinyl chloride)/nanoclay nanocomposites - electrical and mechanical properties
O. I. Dimitry    W. M. Sayed    A. M. Mazroua    A. L. Saad   
8-14
2009-01-10

Effect of environmentally-friendly flame retardants on fire resistance and mechanical properties of rigid polyurethane foam
J. Czech-Polak    B. Przybyszewski    M. Heneczkowski    A. Czulak    M. Gude   
113-116
2021-01-24

Synthesis and properties of vinylpyrrolidone/ (trimethoxysilyl)propyl methacrylate gels containing different amounts of crosslinking agent
A. H. Mohammed    M. B. Ahmad    N. A. Ibrahim    N. Zainuddin   
577-585
2021-01-13

Use of rapid prototyping technology in complex plastic structures Part II. Impact of operating conditions on functional properties of polymer harmonic drives
Jacek Pacana    Rafał Oliwa   
216-223
2021-01-12

Effect of wood particle size on mechanical properties of industrial wood particle-polyethylene composites
C. Gozdecki    S. Zajchowski    M. Kociszewski    A. D. Wilczyński    J. Mirowski   
375-380
2011-05-30

Analysis of the mechanical properties of polymer composites for the production of machine parts used as substitutes for elements obtained from metals
Olimpia Markowska    Tadeusz Markowski    Magdalena Sobczyk   
311-314
2020-12-15

Morphology and selected properties of kenaf fiber/cornhusk reinforced corn starch hybrid biocomposites
M.D. Hazrol    S.M. Sapuan    R.A. Ilyas    E.S. Zainudin    M.Y.M. Zuhri    N.I. Abdul Wahab   
575-588
2023-01-11

Polyimides. Part I. Synthesis and physicochemical properties
E. Hałasa   
171-178
2022-09-17

Microcellular polymer and composites. Part II. Properties of different types of microcellular materials
A. K. Błędzki    O. Faruk    H. Kirschling    J. Kühn    A. Jaszkiewicz   
3-12
2022-08-26

Effect of nitrogen content on physical properties of glass fiber reinforced polyamide 6 prepared by microcellular injection molding
D. Sykutera    P. Szewczykowski    M. Roch    Ł. Wajer    M. Grabowski    M. Bieliński   
743-749
2021-01-13

Edible films and surface coatings made of natural polymers for food packaging. Pt. 1, Properties
K. Sztuka    I. Kołodziejska   
626-630
2022-08-23

Criterion for the choice of injection method
E. Bociąga   
172-180
2010-03-30

Mechanical properties of sugar palm yarn/woven glass fiber reinforced unsaturated polyester composites: effect of fiber loadings and alkaline treatment
N. Mohd Nurazzi    A. Khalina    S. M. Sapuan    R. A. Ilyas   
665-675
2021-01-12

Modification of hydrolytic stability of high molecular weight poly(e-caprolactone) by addition of medium molecular weight poly(e-caprolactone) agregated in the presence of CaO
M. Bednarek    M. Cichorek   
598-601
2014-08-30

Tin oxide cross-linking of chloroprene rubber
A. Smejda-Krzewicka    W. M. Rzymski    D. Kowalski   
186-191
2015-03-30

Application of silver nanoparticles in the modification of polymers
M. Wenda    R. Jeziórska    M. Zielecka    M. Panasiuk   
166-171
2021-01-24

Li-ion electrode nanocomposites with self-assembled conductive carbon layers
M. Molenda    J. Świder    M. Świętosławski    A. Kochanowski   
532-538
2021-01-15

The effect of photopolymerization conditions on selected mechanical properties of dental composites
Agnieszka Nowacka    Tomasz Klepka   
272-281
2021-01-12

Influence of terephthalic and orthophthalic units on the properties of polyols and polyurethane foams
Wiesław Tarnawski    Mateusz Tokarski    Wiktoria Czernecka   
337-343
2023-09-06

Interpenetrating polymer networks of polyurethane and unsaturated polyester
P. Król    J. Wojturska   
242-249
2022-09-18

Polymeric and composite bone cements and related materials. Part I. Classical methacrylic cements and their modifications
J. Łukaszczyk   
79-88
2022-09-01

Hydrogel microcapsules containing natural or chemically modified oligochitosan - mechanical properties and porosity
A. Bartkowiak    W. Brylak   
547-554
2022-08-30

Preparation of fibers from terpoly(ester-ether-ester)s by melt spinning or electrospinning from the solution
P. Zdebiak   
581-586
2022-08-23

Novel halogen-free flame retardants - flame retardation of unsaturated polyester resins with use of boron compound
E. Kicko-Walczak   
126-132
2022-08-23

Optical properties of polyetherketoneketone based indirect dental restorations veneered with composite

Omar Alsadon    DR    DR    DR    DR   
141-148
2022-05-13

Composites of recycled oxo-biodegradable foils filled with wood flour
J. Ryszkowska    K. Sałasińska   
740-747
2010-10-30

Selected electrical and thermal properties of polylactide/graphite composites
M. Żenkiewicz    J. Richert    P. Rytlewski    A. Richert   
489-493
2011-06-30

Effect of heating temperature on rheological properties of inulin gels
P. Glibowski    A. Kulik    A. Masternak   
111-116
2012-02-28

Magnetorheological materials based on ethylene-octene elastomer
M. Masłowski    M. Zaborski   
825-833
2014-12-30

Changes in thermal properties of isotactic polypropylene with different additives during aging process (in English)
A. Brzozowska-Stanuch    S. Rabiej    J. Fabia    J. Nowak   
302-307
2014-04-30

Characteristic and applications of single polymer composites
M. Żenkiewicz    K. Moraczewski    P. Rytlewski    M. Stepczyńska    T. Żuk   
3-11
2015-01-30

Effect of the method of photopolymerization of dental composites based on dimethacrylate resin on the shrinkage stresses and selected properties of the cured material
K. Bociong    M. Krasowski    M. Domarecka    J. Sokołowski   
499-508
2021-01-24

Correlation of manufacturing defects and impact behaviors of kenaf fiber reinforced hybrid fiberglass/Kevlar polyester composite

M.J. Suriani    S.M. Sapuan    C.M. Ruzaidi    J. Naveen    H. Syukriyah    M. Ziefarina   
30-35
2021-01-20

Influence of UV aging on some rheological properties of footwear leather
Wioleta Serweta    Justyna Wójcik    Joanna Rutowicz    Zbigniew Olejniczak   
617-624
2021-01-12

Electrical properties of sugar palm nanocrystalline cellulose reinforced sugar palm starch nanocomposites
M. D. Hazrol    S. M. Sapuan    R. A. Ilyas    M. L. Othman    S. F. K. Sherwani   
363-372
2020-12-15

Effect of alternative carbon-based filler on rubber compounds properties

Slavomíra Božeková    Darina Ondrušová    Mariana Pajtášová    Silvia Ďurišová    Zuzana Mičicová    Ivan Labaj    Katarína Moricová    Tomasz Waldemar Klepka   
585-592
2023-12-18

The effect fo UV radiation on the structure and properties of collagen
A. Sionkowska    A. Kamińska    C. A. Miles    A. J. Bailey   
379-389
2022-09-19

The effect of moisture content and composition on tensile properties of the synthetic polymer/starch composition
A. Figiel    T. Zięba    W. Leszczyński   
547-550
2022-09-01

Effects of bis(2-oxazoline) derivative as compatibilizer and reactive extrusion conditions on the properties of polyamide 6/poly(ethylene terephthalate) blends
R. Jeziórska   
351-358
2022-08-30

Associative polyurethane modifiers of rheological properties of aqueous dispersions of polymers. Part 2, The effects of selected factors on modifiers' activities
J. Przybylski   
440-445
2022-08-23

Study of the effect of substituent size on the inclusion properties of calixarenes, by inverse gas chromatography
M. Białoń    J. Hetper   
216-220
2009-03-15

Pineapple leaf fibers as a reinforcement of biocomposites - an overview
Dr Rahmah     Norsuriati    Dr Nurazzi    Khairunnisa   
559-573
2021-11-29

Polymeric hybrid and composite materials containing functionalized polyhedral oligomeric silsesquioxanes (POSS)
E. Andrzejewska    A. Marcinkowska    D. Prządka    A. Kloziński    P. Jakubowska   
794-804
2013-10-30

Synthesis, thermal and performance properties of poly(urethane-dimethylsiloxane) anionomers. Part II. Thermal and performance properties
Ł. Byczyński    P. Król   
263-269
2013-04-30

Thermal aging of hydrogenated nitrile rubber – loss of additives and its influence on elasticity maintenance
X. Liu    J. Zhao    R. Yang    R. Iervolino    S. Barbera   
588-598
2021-01-15

Effect of sago starch and plasticizer content on the properties of thermoplastic films: mechanical testing and cyclic soaking-drying
M. J. Halimatul    S. M. Sapuan    M. Jawaid    M. R. Ishak    R. A. Ilyas   
422-431
2021-01-12

The structure and properties of viscoelastic polyurethane foams with fillers from coffee grounds
Monika Auguścik-Królikowska    Joanna Ryszkowska    Agata Ambroziak    Leonard Szczepkowski    Rafał Oliwa    Mariusz Oleksy   
708-718
2020-12-16

Nanoparticles of g-Al2O3 as persperctive fillers of thermoplastic polymers improving their barrier properties
N. Lepot    M. K. Bael van    H. Rul van den    R. Peeters    J. Mullens    D. Franco   
662-664
2022-08-30

Varnishes modified with nanoparticles for use in electrical insulation
B. Górnicka    B. Czołowska    B. Mazurek    J. Zawadzka    L. Górecki   
367-370
2022-08-26

1 - 300 of 500 items 1 2 > >> 
Łukasiewicz Research Network – Industrial Chemistry Institute
ul. Rydygiera 8,
01-793 Warszawa
email: polimeryjournal@ichp.lukasiewicz.gov.pl
tel. +48 22 633 98 04
Links:
https://ichp.lukasiewicz.gov.pl
https://lukasiewicz.gov.pl
About:
Copyright 2019 by Łukasiewicz Research Network – Industrial Chemistry Institute
OJS Support and Customization by LIBCOM
Platform & workfow by OJS/PKP