Mechanical strength assessment of aramid, glass and aramid-glass hybrid fibers reinforced dental photopolymer

Bartosz Bienias; Wojciech Michalski; Leopold Wagner

doi:10.14314/polimery.2019.9.5

Published : 2021-01-12

Vol. 64 No. 9 (2019)

Mechanical strength assessment of aramid, glass and aramid-glass hybrid fibers reinforced dental photopolymer

Bartosz Bienias Wojciech Michalski Leopold Wagner

DOI: https://doi.org/10.14314/polimery.2019.9.5

Abstract

Strength parameters of dental photopolymer reinforced with long glass and aramid as well as aramid-glass hybrid fibers was to comparison. Static strength tests of 40 light-curing composite specimens were performed with the use of Zwick 1435 testing machine and testXpert V.8.1 software. Flexural strength of aramid fiber reinforced polymer increased nearly three times, where as flexural strength of polymer reinforced with glass fiber – twice.

Keywords

mechanical strength ; polymer ; glass fibers ; aramid fibers ; aramid-glass hybrid wytrzymałość mechaniczna ; polimer ; włókna szklane ; włókna aramidowe ; włókna hybrydowe aramidowo-szklane

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Bienias, B., Michalski, W., & Wagner, L. (2021). Mechanical strength assessment of aramid, glass and aramid-glass hybrid fibers reinforced dental photopolymer. Polimery, 64(9), 604–608. https://doi.org/10.14314/polimery.2019.9.5

References

Powers J.M., Wataha J.C.: “Dental Materials” 10th Edition, Elsevier Mosby, St. Luis 2013, pp. 168–180.

[2] Vallittu P.K.: Acta Biomaterialia Odontologica Scandinavica 2018, 4, 44. http://dx.doi.org/10.1080/23337931.2018.1457445

[3] Wolff D., Wohlrab T., Saure D. et al.: The Journal of Prosthetic Dentistry 2018, 119, 47. https://doi.org/10.1016/j.prosdent.2017.02.008

[4] Vallittu P.K., Shinya A., Baraba A. et al.: Dental Materials 2017, 33, 877. http://dx.doi.org/10.1016 j.dental. 2017.05.001

[5] Chladek W., Lipski T., Karasiński A.: Acta of Bioengineering and Biomechanics 2001, 3, 25.

[6] Bienias B., Michalski W., Wagner L.: Polimery 2019, 64, 417.http: //dx .doi .org/dx .doi .org/10.14314/polimery.2019.6.4

[7] Guide to the expression of uncertainty in measurement ISO-IEC-OIML-BIPM, TAG 4/WG 3. Wyd. pol.„Wyrażanie niepewności pomiaru – Przewodnik”, Główny Urząd Miar, Warszawa 1999.

[8] “Expression of the uncertainty in measurement in calibration”, Wyd. pol. Zakładu Metrologii Ogólnej Głównego Urzędu Miar, Warszawa 2001, ISBN 83-906546-2-8.

[9] Vallittu P.K.: Dental Materials 2015, 31, 1. http://dx.doi.org/10.1016 j.dental. 2014.07.009

[10] Dyer S.R., Lassila L., Jokinen M. et al.: Dental Materials 2004, 20, 947. http://dx.doi.org/10.1016 j.dental. 2003.12.003

[11] Ellakwa A.E., Shortall A.C., Marquis P.M.: The Journal of Prosthetic Dentistry 2002, 88, 485.

[12] Park S.J., Seo M.K., Ma T.J. et al.: Journal of Colloid and Interface Science 2002, 252, 249. http://dx.doi.org/10.1006/jcis. 2002.8479

[13] Ghulman M.A., Hamed M.T., Mira A.I. et al.: Journal of King Abdulaziz University – Science 2012, 19, 45. http://dx.doi.org/10.4197/Med. 19-2.4

[14] Calabrese L., Fabiano F, Bonaccorsi L.M. et al.: International Journal of Biomaterials 2015, ID 149798. http://dx.doi.org/10.1155/2015/149798

[15] Abdulmajeed A.A., Narhi T.O., Vallittu P.K. et al.: Dental Materials 2011, 27, 313. http://dx.doi.org/10.1016/j.dental.2010.11.007

[16] Yap A.U.J., Teoh S.H.: Journal of Oral Rehabilitation 2003, 30, 171. https://doi.org/10.1046/j.1365-2842.2003.01004.x

[17] Behr M., Rosentritt M., Lang R., Handel G.: Journal of Dentistry 2000, 28, 509. https://doi.org/10.1016/S0300-5712(00)00031-2

[18] Segerstrom S., Ruyter I.E.: Dental Materials 2007, 23, 1150. http://dx.doi.org/10.1016/j.dental.2006.06.050

[19] Chieruzzi M., Pagano S., Pennacchi M. et al.: Journal of Dentistry 2012, 40, 968. http://dx.doi.org/10.1016/j.dent.2012.08.003

[20] Chen Y.Ch., Li H., Fok A.: Dental Materials 2011, 27, 1229. http://dx.doi.org/10.1016/j.dental.2011.08.402

[21] Huang Q., Garoushi S., Lin Z. et al.: Journal of Prosthodontic Research 2017, 61, 471. https://doi.org/10.1016/j.jpor.2017.03.002

[22] Sideridis E., Papadopoulos G. A.: Journal of Applied Polymer Science 2004, 93, 63. http://dx.doi.org/10.1002/app.20382

[23] Saygili G, Sahmali M., Demirel F.: Operative Dentistry 2003, 28, 80.

[24] Lassila L., Tezvergil A., Lahdenpera M. et al.: Acta Odontologica Scandinavica 2005, 63, 196. http://dx.doi.org/10.1080/00016350510019946

[25] Lassila L., Garoushi S., Vallittu P.K. et al.: Journal of the Mechanical Behavior of Biomedical Materials 2016, 60, 331. http://dx.doi.org/10.1016/j.jmbbm.2016.01.036

[26] Kabrhari V.M., Strassler H.: Dental Materials 2007, 23, 960. http://dx.doi.org/10.1016/j.dental.2006.08.003

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

Bartosz Bienias bartek.bienias@gmail.com

Affiliation
Medical University of Warsaw, Department of Dental Propaedeutics and Prophylaxis, Nowogrodzka 59, pav. XI D, 02-006 Warsaw, Poland

Wojciech Michalski

Affiliation
Medical University of Warsaw, Department of Dental Propaedeutics and Prophylaxis, Nowogrodzka 59, pav. XI D, 02-006 Warsaw, Poland

Leopold Wagner

Affiliation
Medical University of Warsaw, Department of Dental Propaedeutics and Prophylaxis, Nowogrodzka 59, pav. XI D, 02-006 Warsaw, Poland