Właściwości karboksylowanego kauczuku butadienowo-akrylonitrylowego zawierającego "in situ" zsyntetyzowane napełniacze krzemionkowe

M. Zaborski; J. Pietrasik

Published : 2022-09-18

Vol. 47 No. 9 (2002)

Properties of carboxylated acrylonitrile/butadiene rubber containing "in situ" synthesized silica fillers

M. Zaborski J. Pietrasik

Abstract

From silica precursors we synthesized silica fillers in sol-gel reaction in the carboxylated acrylonitrile/butadiene rubber (XNBR). N-2-aminoethyl-3-aminopropyl-trimethoxysilane (DAMS) and tetraethoxysilane (TEOS) were used as fillers' precursors. It has been found that DAMS is a substance crosslinking XNBR. The network points are silsesquioxanes' domains containing amide as well as ionic bonds. Some part of points (similar to30%) decompose under ethylenediamine treatment. The bigger DAMS content the bigger crosslinking density of elastomer as ell as the stress at suitable elongation and tensile strength Tables 2 and 4). The dynamic properties measurements show that rganosilica compounds do not influence glass transitiontemperature of elastomer (Table 6) but in the range of 30-40degreesC the second maximum appears which is a transition connected to ionic aggregates activity. Addition of a mixture of DAMS + TEOS to the elastomer causes the increase of crosslinking of silsesquioxanes' domains and the filler shows tendency to creation of its own structure (Fig. 2). Si-29 NMR results show that mostly trifunctional structures Q(3) are obtained for equal ratio of silanes (1:1) but tetrafunctional structures Q(4) are also present (Table 1). The increasing of tetrafunctional structure Q(4) content, that is a synthesis of a filler with DAMS + TEOS mixture, leads to the increase of stress at suitable elongation, and tensile strength (Table 5).

Keywords

synteza in situ ; N-2-aminoetylo-3-aminopropylotrimetoksysilan ; tetraetoksysilan ; karboksylowany kauczuk butadienowo-akrylonitrylowy ; sieciowanie ; właściwości wulkanizatów silica filler "in situ" synthesis ; N-2-aminoethyl-3-aminopropyltrimethoxysilane ; tetraethoxysilane ; carboxylated acrylonitrile-butadiene rubber ; crosslinking ; vulcanizates properties

Details

Statistics

Authors

Download files

PDF (Język Polski)

Zasady cytowania

Zaborski, M., & Pietrasik, J. (2022). Properties of carboxylated acrylonitrile/butadiene rubber containing "in situ" synthesized silica fillers. Polimery, 47(9), 643-649. Retrieved from https://ichp.vot.pl/index.php/p/article/view/2012

Citing articles via

Statistics

Total abstract views : 30

PDF Downloads : 66