Influence of steam sterilization and raster angle on the deflection of 3D printing shapes: Rapid communication

Małgorzata  Zaborniak; Grzegorz  Budzik; Katarzyna  Grzywacz-Danielewicz; Jerzy  Józwik; Krzysztof  Dziedzic; Marek  Magniszewski; Danuta  Rak

doi:10.14314/polimery.2024.2.6

Published : 2024-03-08

Vol. 69 No. 2 (2024)

Influence of steam sterilization and raster angle on the deflection of 3D printing shapes

Małgorzata Zaborniak https://orcid.org/0000-0002-3219-3092 Grzegorz Budzik https://orcid.org/0000-0003-3598-2860 Katarzyna Grzywacz-Danielewicz Jerzy Józwik https://orcid.org/0000-0002-8845-0764 Krzysztof Dziedzic https://orcid.org/0000-0003-4909-9980 Marek Magniszewski https://orcid.org/0000-0002-9088-8159 Danuta Rak https://orcid.org/0009-0006-2172-2936

DOI: https://doi.org/10.14314/polimery.2024.2.6

Rapid communication

Abstract

The study examined influence of steam sterilization and the raster angle (0°, 90°) on the deflection of polymer shapes obtained by 3D printing. In the case of PEEK and PLA, the FDM/FFF method was used, in the case of photocurable resin, DLP technology, and in the case of MED610, PolyJet technology. It was shown that the raster angle, type of material and sterilization have a significant impact on the strength and deformation of the tested polymers. A model of a facial bone implant was also
developed and the suitability of the tested materials for obtaining this type of implants was examined. The dimensional accuracy of the implant models was highest for the MED610 model. However, due to the significant deflection of this polymer under load, its use is only possible in areas of low stress. In the case of UV resin printed in the vertical direction (90°), the samples showed the least deflection and the printed model had no visible defects. The greatest deformations occurred at the ends and narrowing’s of the model.

Keywords

3D printing ; implants ; sterilization ; deflection druk 3D ; implanty ; sterylizacja ; ugięcie

Details

References

Statistics

Authors

Download files

artykul

Zasady cytowania

Zaborniak, M. ., Budzik, G. ., Grzywacz-Danielewicz, K. ., Józwik, J. ., Dziedzic, K. ., Magniszewski, M. ., & Rak, D. . (2024). Influence of steam sterilization and raster angle on the deflection of 3D printing shapes: Rapid communication. Polimery, 69(2), 117-122. https://doi.org/10.14314/polimery.2024.2.6

Licence

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

References

Paul G. M., Rezaienia A., Wen P. et al.: Journal of the Missouri State Medical Association 2018, 115, 75.
Crossref Google Scholar

Tyrakowska Z. J., Czerżyńska M., Sochoń K. et al.: ”Materiały implantacyjne we współczesnej medycynie - Holistyczny wymiar współczesnej medycyny. Praca zbiorowa”, Uniwersytet Medyczny w Białymstoku, Białystok, 2015. Google Scholar

Ahangar P., Cooke M. E., Weber M.H. et.al.: Current Biomedical Applications of 3D Printing and Additive Manufacturing 2019, 9(8), 1713.
Crossref Google Scholar

Bociąga D., Jastrzębski K., Olejnik A. et al.: Engineering of Biomaterials 2016, 19, 11. Google Scholar

Andrzejewska A., Topoliński T.: Developments in Mechanical Engineering 2015, 6(3), 5. Google Scholar

Garbacz T., Tor-Świątek A., Samujło B.: ”Właściwości mechaniczne i cieplne tworzyw polimerowych – Ćwiczenia laboratoryjne”, Politechnika Lubelska, Lublin 2017. Google Scholar

Hasirci V., Hasirci N.: “Fundamentals of Biomaterials”, Springer, New York 2018.
Crossref Google Scholar

Budzik G., Zaborniak M., Roczniak J.: Polimery 2022, 67(10), 483.
Crossref Google Scholar

Rynio P., Galant K., Wójcik Ł. et al.: International Journal of Molecular Sciences 2022, 23(7), 3539.
Crossref Google Scholar

Oth O., Dauchot C., Orellaha M. et al.: The Open Dentistry Journal 2019, 13, 410.
Crossref Google Scholar

Shaheen E., Alhelwani A., Van De Casteele E. et al.: The Open Dentistry Journal 2018, 12, 72.
Crossref Google Scholar

Avashia Y. J., Sastry A., Fan K. L. et al.: Journal of Craniofacial Surgery 2012, 23(7), 49.
Crossref Google Scholar

Mandolini M., Brunzini A., Germani M. et al.: Rapid Prototyping Journal 2019, 25(1), 95.
Crossref Google Scholar

Kwon J., Kim G. B., Kang S. et al.: Rapid Prototyping Journal 2020, 26(8), 1363.
Crossref Google Scholar

Javaid M., Haleem A.: Alexandria Journal of Medicine 2018, 54(4), 411.
Crossref Google Scholar

Tack P., Victor J., Gemmel P. et al.: BioMedical Engineering OnLine 2016, 115
Crossref Google Scholar

Gardan J.: „Additive manufacturing technologies” in “Additive Manufacturing Handbook”, CRC Press, Boca Raton 2017. Google Scholar

Crossref Google Scholar

Thompson M. K. et al.: CIRP Annals 2016, 65(2), 737.
Crossref Google Scholar

Gibson I, Rosen D., Stucker B. et al.: “Additive Manufacturing Technologies”, Springer, Cham 2020.
Crossref Google Scholar

Wang X., Tuomi J., Mäkitie A. A. et al.: “The Integration of Biomaterials and Rapid Prototyping Techniques for Intelligent Manufacturing of Complex Organs” in “Advances in Biomaterials Science and Biomedical Applications”, IntechOpen, Rijeka 2013. p. 437.
Crossref Google Scholar

O’Malley F. L., Millward H., Eggbeer D. et al.: Additive Manufacturing 2016, 9, 25.
Crossref Google Scholar

Lowther M. Louth S., Davey A., et al.: Additive Manufacturing 2019, 28, 565.
Crossref Google Scholar

Kropla F., Winkler D., Lindner D. et al.: 3D Printing in Medicine 2023, 9, 19.
Crossref Google Scholar

De La Peña A., De La Peña-Brambila J., Pérez-De La Torre J. et al.: 3D Printing in Medicine 2018, 4, 4.
Crossref Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 103

PDF Downloads : 79

Małgorzata Zaborniak mzab@prz.edu.pl
https://orcid.org/0000-0002-3219-3092

Affiliation
Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, Al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland

Grzegorz Budzik
https://orcid.org/0000-0003-3598-2860

Affiliation
Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, Al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland

Katarzyna Grzywacz-Danielewicz

Affiliation
Rzeszow University of Technology, Faculty of Mechanical Engineering and Aeronautics, Al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland

Jerzy Józwik
https://orcid.org/0000-0002-8845-0764

Affiliation
Lublin University of Technology, Mechanical Engineering Faculty, ul. Nadbystrzycka 36, 20-618 Lublin, Poland

Krzysztof Dziedzic
https://orcid.org/0000-0003-4909-9980

Affiliation
Lublin University of Technology, Electrical Engineering and Computer Science Faculty, ul. Nadbystrzycka 38 A, 20-618 Lublin, Poland

Marek Magniszewski
https://orcid.org/0000-0002-9088-8159

Affiliation
Rzeszow University of Technology, Faculty of Management, Al. Powstańców Warszawy 12, 35-959 Rzeszow, Poland

Danuta Rak
https://orcid.org/0009-0006-2172-2936

Affiliation
3DR Design and Training Studio, ul. Kornela Makuszyńskiego 5I/25, 35-313Rzeszow, Poland