Effect of nitrogen content on physical properties of glass fiber reinforced polyamide 6 prepared by microcellular injection molding

D. Sykutera; P. Szewczykowski; M. Roch; Ł. Wajer; M. Grabowski; M. Bieliński

doi:10.14314/polimery.2018.11.1

Published : 2021-01-13

Vol. 63 No. 11-12 (2018)

Effect of nitrogen content on physical properties of glass fiber reinforced polyamide 6 prepared by microcellular injection molding

D. Sykutera P. Szewczykowski M. Roch Ł. Wajer M. Grabowski M. Bieliński

DOI: https://doi.org/10.14314/polimery.2018.11.1

Abstract

The aim of the study was to determine the effect of the amount of nitrogen dosed in supercritical state to polymer melt on structure and physical properties of large-scale molded pieces from polyamide PA 6 GF30, obtained in the process of microcellular injection molding with gas dosage using MuCell® method. Apart from the reduction of the density at a level of about 15 % for samples with the highest nitrogen content, the increase of the impact resistance of samples PA 6 GF30 was observed. The other investigated mechanical properties were maintained at a good level.

Keywords

microcellular injection molding ; MuCell® technology ; polyamide PA 6 GF30 ; porous materials ; mechanical properties wtryskiwanie mikroporujące ; technologia MuCell® ; poliamid PA6 GF30 ; materiały porowate ; właściwości mechaniczne

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Sykutera, D., Szewczykowski, P., Roch, M., Wajer, Ł., Grabowski, M., & Bieliński, M. (2021). Effect of nitrogen content on physical properties of glass fiber reinforced polyamide 6 prepared by microcellular injection molding. Polimery, 63(11-12), 743-749. https://doi.org/10.14314/polimery.2018.11.1

References

Troltzsch J., Helbig F., Kroll L.: Journal of Thermoplastic Composite Materials 2016, 29, 1033.
Crossref

[2] Schuck M.: Sampe Journal 2012, 48, 20.

[3] Wu H.B., Wintermantel E.: Journal of Cellular Plastics 2010, 46, 519.
Crossref

[4] Kaczmar J.W., Wroblewski R., Nakonieczny L. et al.: Polimery 2008, 53, 519.

[5] Szostak M., Krzywidzińska P., Barczewski M.: Polimery 2018, 63, 145.
Crossref

[6] Chen S.C., Hsu P.S., Hwang S.S.: Journal of Applied Polymer Science 2012, 127, 4796.
Crossref

[7] Bociąga E., Palutkiewicz P.: Cellular Polymers 2013, 32, 257.

[8] Palutkiewicz P., Garbacz T.: Polimery 2017, 62, 447.
Crossref

[9] Palutkiewicz P.: Polimery 2015, 60, 132.
Crossref

[10] Sykutera D., Bieliński M.: Polimery 2014, 59, 602.
Crossref

[11] Dong G.W., Zhao G.Q., Guan Y.J. et al.: Journal of Applied Polymer Science 2014, 131, 40 365.
Crossref

[12] Gomez-Monterdea J., Schulteb M., Ilijevicb S. et al.: “Morphology and mechanical characterization of ABS foamed microcellular injection molding”, Materials Manufacturing Engineering Society International Conference 2015, Barcelona, Spain, 22–25 July 2015, pp. 15–22.

[13] Gomez-Monterde J., Sanchez-Soto M., Maspoch M.L.: Composites: Part A – Applied Science and Manufacturing 2018, 104, 1.
Crossref

[14] Bravo V.L., Hrymak A.N.: International Polymer Processing 2005, 20, 149.
Crossref

[15] Hwang S.S., Ke Z.S.: International Communications in Heat and Mass Transfer 2008, 35, 265. h t t p s://do i .o r g /10.1016/ j . i c h e at m a s s t r a n s fer.2007.08.015

[16] Suhartono E., Chen S.C., Lee K.H., Wang K.J.: International Journal of Plastics Technology 2017, 21, 351.
Crossref

[17] Xi Z.H., Sha X.Y., Liu T.: Journal of Cellular Plastics 2014, 50, 489.
Crossref

[18] Prociak A., Pielichowski J., Sterzynski T.: Polymer Testing 2000, 19, 705.

Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 292

PDF Downloads : 193

D. Sykutera Dariusz.Sykutera@utp.edu.pl

Affiliation
UTP University of Science and Technology, Department of Materials Engineering and Polymer Processing, Institute of Manufacturing Technology, Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland

P. Szewczykowski

Affiliation
UTP University of Science and Technology, Department of Materials Engineering and Polymer Processing, Institute of Manufacturing Technology, Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland

M. Roch

Affiliation
UTP University of Science and Technology, Department of Materials Engineering and Polymer Processing, Institute of Manufacturing Technology, Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland

Ł. Wajer

Affiliation
UTP University of Science and Technology, Department of Materials Engineering and Polymer Processing, Institute of Manufacturing Technology, Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland

M. Grabowski

Affiliation
GRAFORM Company, Wróblowa 7, 85-437 Bydgoszcz, Poland

M. Bieliński

Affiliation
UTP University of Science and Technology, Department of Materials Engineering and Polymer Processing, Institute of Manufacturing Technology, Al. Prof. S. Kaliskiego 7, 85-796 Bydgoszcz, Poland