Porous polyurethane plastics synthetized using bio-polyols from renewable raw materials

A. Prociak; M. Kurańska; E. Malewska

doi:10.14314/polimery.2017.353

Published : 2021-01-15

Vol. 62 No. 5 (2017)

Porous polyurethane plastics synthetized using bio-polyols from renewable raw materials

A. Prociak M. Kurańska E. Malewska

DOI: https://doi.org/10.14314/polimery.2017.353

Abstract

A literature review and own investigations have been a base for presenting various methods of the synthesis of bio-polyols from renewable raw materials as well as their potential applications in the formulations of flexible and rigid polyurethane foams (Table 1). A characteristics of selected bio-polyols (Table 2) and their effect on foaming process of different polyurethane compositions are shown (Fig. 1, Table 3). Examples of the influence of selected bio-polyols on cell structures and physical and mechanical properties of both flexible (Fig. 2) and rigid (Table 4) foams are also presented.

Keywords

bio-polyol ; modification ; polyurethane ; foaming process ; flexible foam ; rigid foam biopoliol ; modyfikacja ; poliuretan ; proces spieniania ; pianka elastyczna ; pianka sztywna

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Prociak, A., Kurańska, M., & Malewska, E. (2021). Porous polyurethane plastics synthetized using bio-polyols from renewable raw materials. Polimery, 62(5), 353-363. https://doi.org/10.14314/polimery.2017.353

References

Ibrahim S., Ahmad A., Mohamed N.: Bullettin of Materials Science 2015, 38, 1155
Crossref

[2] Prociak A., Rokicki G., Ryszkowska J.: „Materiały poliuretanowe”, Wyd. Naukowe PWN, 2014.

[3] Prociak A.: “Bio-based polyurethane foams” in “Biofoams – Science and Applications of Bio-Based Cellular and Porous Materials” (Eds. Iannace S., Park C.B.), CRC Press, Boca Raton 2016, pp. 267–285.

[4] Tejas S.G., Mayank R.P., Bharatkumar Z.D.: Journal of Polymer Engineering 2015, 35, 533
Crossref

[5] Kurańska M., Prociak A., Cabulis U., Kirpluks M.: Polimery 2015, 60, 705
Crossref

[6] Malewska E., Bąk S., Prociak A.: Journal of Applied Polymer Science 2015, 132, 42 372
Crossref

[7] Kurańska M., Prociak A., Kirpluks M., Cabulis U.: Composites Science Technology 2013, 75, 70
Crossref

[8] Prociak A., Kurańska M., Malewska E. et al.: Polimery 2015, 60, 592
Crossref

[9] Kurańska M., Prociak A.: Composites Science Technology 2012, 72, 299
Crossref

[10] Kurańska M., Prociak A., Kirpluks M., Cabulis U.: Industrial Crops and Products 2015, 74, 849
Crossref

[11] Zieleniewska M., Leszczyński M.K., Kurańska M. et al.: Industrial Crops and Products 2015, 74, 887
Crossref

[12] Kurańska M., Prociak A.: “Bio-Based Polyurethane Foams for Heat-Insulating Applications” in “Nano and Biotech Based Materials for Energy Building Efficiency” (Eds. Torgal F.P., Buratti C., Kalaiselvam S., Granqvist C.G., Ivanov V.), Springer International Publishing, Switzerland 2016, pp. 357–373.

[13] Narine S.S., Kong X., Bouzidi L.: Journal of the American Oil Chemists’ Society 2007, 84, 65
Crossref

[14] Petrović Z.S.: Polymer Reviews 2008, 48, 109
Crossref

[15] Sharma C., Kumar S., Raman U.A. et al.: Journal of Applied Polymer Science 2014, 131, 8420
Crossref

[16] Miaoa S., Wang P., Su Z., Zhang S.: Acta Biomaterialia 2014, 10, 1692
Crossref

[17] Petrovic Z.S., Zhang W., Javni I.: Biomacromolecules 2005, 6, 713
Crossref

[18] Narine S.S., Kong X., Bouzidi L., Sporns P.: Journal of the American Oil Chemists’ Society 2007, 84, 55
Crossref

[19] Narine S.S., Yue J., Kong X.: Journal of the American Oil Chemists’ Society 2007, 84, 173
Crossref

[20] Datta J., Głowińska E.: Journal of Elastomers & Plastics 2014, 46, 33
Crossref

[21] Guo A., Demydov D., Zhang W., Petrovic Z.S.: Journal of Polymers and the Environment 2002, 10, 49
Crossref

[22] Patil H., Waghmare J.: Discovery 2013, 3, 10.

[23] Goud V.V., Patwardhan A.V., Dinda S., Pradhan N.C.: Chemical Engineering Science 2007, 62, 4065
Crossref

[24] Hilker D., Pruk J., Warnecke H.J.: Chemical Engineering Science 2001, 56, 427
Crossref

[25] Milchert E., Smagowicz A.: Journal of the American Oil Chemists’ Society 2009, 86, 1227
Crossref

[26] Sharmin E., Ashraf S.M., Ahmad S.: International Journal of Biological Macromolecules 2007, 40, 407
Crossref

[27] Allauddin S., Somisetti V., Ravinder T. et al.: Industrial Crops and Products 2016, 85, 361
Crossref

[28] Caillol S., Desroches M., Boutevin G. et al.: European Journal of Lipid Science and Technology 2012, 114, 1447
Crossref

[29] Pawlik H., Prociak A.: Journal of Polymers and the Environment 2012, 20, 438
Crossref

[30] Wang C.S., Yang L.T., Ni B.L., Shi G.: Journal of Applied Polymer Science 2009, 114, 125
Crossref

[31] Ji D., Fang Z., He W. et al.: Industrial Crops and Products 2015, 74, 76
Crossref

[32] Dai H., Yang L., Lin B. et al.: Journal of the American Oil Chemists’ Society 2009, 86, 261
Crossref

[33] Guo A., Cho Y., Petrovic Z.S.: Journal of Polymer Science: Part A: Polymer Chemistry 2000, 38, 3900
Crossref<3900::AID-POLA70>3.0.CO;2-E

[34] Rojek P., Prociak A.: Journal of Applied Polymer Science 2012, 125, 2936
Crossref

[35] Zieleniewska M., Auguscik M., Prociak A. et al.: Polymer Degradation and Stability 2014, 108, 241
Crossref

[36] Kurańska M., Michałowski S., Radwańska J. et al.: Przemysł Chemiczny 2016, 95/2, 256
Crossref

[37] Kurańska M., Prociak A.: Industrial Crops and Products 2016, 89, 182
Crossref

[38] Mosiewicki M.A., Rojek P., Michałowski S. et al.: Journal of Applied Polymer Science 2015, 32, 41602
Crossref

[39] Fan H., Tekeei A., Suppes G.J., Hsieh F.H.: International Journal of Polymer Science 2012, 2012, ID 907049
Crossref

[40] Kirpluks M., Cābulis U., Kurańska M., Prociak A.: Key Engineering Materials 2013, 559, 69
Crossref

[41] Kurańska M., Cabulis U., Auguscik M. et al.: Polymer Degradation and Stability 2016, 127, 11
Crossref

[42] Stirna U., Fridrihsone A., Lazdin B. et al.: Journal of Polymers and the Environment 2013, 21, 952
Crossref

[43] Arniza M.Z., Hoong S.S., Idris Z. et al.: Journal of the American Oil Chemists’ Society 2015, 92, 243
Crossref

[44] Septevani A.A., Evans D.A.C., Chaleat C. et al.: Industrial Crops and Products 2015, 66, 16
Crossref

[45] Zhang L., Zhang M., Zhou Y., Hu L.: Polymer Degradation and Stability 2013, 98, 2784
Crossref

[46] Zhang L., Zhang M., Hu L., Zhou Y.: Industrial Crops and Products 2014, 52, 380
Crossref

[47] Piszczyk Ł., Hejna A., Danowska M. et al.: Journal of Reinforced Plastics and Composites 2015, 34, 708
Crossref

[48] Piszczyk Ł., Strankowski M., Danowska M. et al.: European Polymer Journal 2014, 57, 143
Crossref

[49] Omrani I., Farhadian A., Babanejad N. et al.: European Polymer Journal 2016, 82, 220
Crossref

[50] Alagi P., Choi Y.J., Hong S.C.: European Polymer Journal 2016, 78, 46
Crossref

[51] Quirino R.L., Silva T.F., Payne A.: Coatings 2015, 5, 528
Crossref

[52] Xie J., Qi J., Hse Ch.-Y., Shupe F.T.: Bioresources 2014, 9, 578.
Crossref

[53] Orgilés-Calpena E., Arán-Aís F., Torró-Palau A.M., Orgilés-Barceló C.: Polymers from Renewable Resources 2014, 5, 100.

[54] Singh A.P., Bhattacharya M.: Polymer Engineering & Science 2004, 44, 1977
Crossref

[55] Bassam N., Candy L., Blanco J. et al.: Macromolecules 2013, 46, 3771
Crossref

[56] Gu R., Konar S., Sain M.: Journal of the American Oil Chemists’ Society 2012, 898, 2103
Crossref

[57] Zlatanic A., Petrovic Z.S., Dusek K.: Biomacromolecules 2002, 3, 1048
Crossref

[58] Zhang Ch., Kessler M.R.: ACS Sustainable Chemistry & Engineering 2015, 3, 743
Crossref

[59] Dworakowska S., Bogdal D., Prociak A.: Polymers 2012, 4, 1462
Crossref

[60] Pawlik H., Prociak A., Pielichowski J.: Czasopismo Techniczne-Chemia 2009, 106, 111.

[61] Prociak A., Rojek P., Pawlik H.: Journal of Cellular Plastics 2012, 48, 489
Crossref

[62] Ugarte L., Sarelegi A., Fernandez R. et al.: Industrial Crops and Products 2014, 62, 545
Crossref

[63] Das S., Dave M., Wilkes G.: Journal of Applied Polymer Science 2009, 112, 299
Crossref

[64] Aremu M.O., Ojetade J.O., Olaluwoye O.S.: Chemical and Process Engineering Research 2015, 35, 24.

[65] Michałowski S., Prociak A.: Journal of Renewable Materials 2015, 3, 14
Crossref

[66] Srihaum A., Ismanil T.N.M.T., Noor N.M. et al.: Advance in Material Science and Engineering 2016, 2016, ID 4316424.
Crossref

[67] Campanella A., Bonnailie L.M., Wool R.P.: Journal of Applied Polymer Science 2009, 112, 2567
Crossref

[68] Malewska E., Budny P., Prociak A.: Modern Polymeric Materials for Environmental Applications 2016, 6, 231.

[69] Zhang L., Jeon H., Malsam J. et al.: Polymer 2007, 48, 6656
Crossref

[70] Malewska E., Bąk S., Kurańska M., Prociak A.: Polimery 2016, 61, 799
Crossref

[71] Petrovic A.S., Zhang W., Zlatanic A. et al.: Journal of Polymers and the Environment 2002, 10, 5
Crossref

[72] Pielichowski K., Kulesza K., Pearce E.M.: Journal of Applied Polymer Science 2003, 88, 2319
Crossref

[73] Ravey M., Pearce E.M.: Journal of Applied Polymer Science 1997, 63, 47
Crossref<47::AID-APP7>3.0.CO;2-S

[74] Pechar T.W., Wilkes G.L., Zhou G.L., Ning B.: Journal of Applied Polymer Science 2007, 106, 2350
Crossref

[75] Zlatanic A., Lava C., Zhang W., Petrovic Z.S.: Journal of Polymer Science Part B: Polymer Physics 2004, 42, 809
Crossref

[76] Javni I., Zhang W., Petrovic Z.S.: Journal of Polymers and the Environment 2004, 12, 123
Crossref

[77] Tu Y.C., Fan H., Suppes G.J., Hsieh F.H.: Journal of Applied Polymer Science 2009, 114, 2577
Crossref

[78] Fan H., Tekeei A., Suppes G.J., Hsieh F.H.: Journal of Applied Polymer Science 2013, 127, 1623
Crossref

[79] Arbenz A., Frache A., Cuttica F., Averous L.: Polymer Degradation and Stability 2016, 132, 62
Crossref

[80] Tu Y.C., Suppes G.J., Hsieh F.H.: Journal of Applied Polymer Science 2008, 109, 537
Crossref

[81] Seo W.J., Park J.H., Sung Y.T. et al.: Journal of Applied Polymer Science 2004, 93, 2334
Crossref

[82] Weißenborn O., Ebert Ch., Gude M.: Polymer Testing 2016, 54, 145
Crossref

[83] Pillai P.K.S., Li S., Bouzidi L., Narine S.S.: Industrial Crops and Products 2016, 84, 273
Crossref

[84] Kairyte A., Vejelis S.: Industrial Crops and Products 2015, 66, 210
Crossref

[85] Jin J.F., Chen Y.L., Wang D.N. et al.: Journal of Applied Polymer Science 2002, 84, 598
Crossref

[86] Tan S., Abraham T., Forence D., Macosko Ch.: Polymer 2011, 52, 2840
Crossref

[87] Prociak A.: Polimery 2008, 52, 196.

[88] Jiao L., Xiao H., Wang Q., Sun J.: Polymer Degradation and Stability 2013, 98, 2687
Crossref

[89] Levchik S.V., Weil D.E.: Polymer International 2004, 53, 1585
Crossref

[90] Zhang F., Luo X.: Industrial Crops and Products 2015, 77, 175
Crossref

Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 387

PDF Downloads : 162

A. Prociak aprociak@pk.edu.pl

Affiliation
Cracow University of Technology, Department of Chemistry and Technology of Polymers, Warszawska 24, 31-155 Cracow, Poland

M. Kurańska

Affiliation
Cracow University of Technology, Department of Chemistry and Technology of Polymers, Warszawska 24, 31-155 Cracow, Poland

E. Malewska

Affiliation
Cracow University of Technology, Department of Chemistry and Technology of Polymers, Warszawska 24, 31-155 Cracow, Poland