Electrical properties of sugar palm nanocrystalline cellulose reinforced sugar palm starch nanocomposites

M. D. Hazrol; S. M. Sapuan; R. A. Ilyas; M. L. Othman; S. F. K. Sherwani

doi:10.14314/polimery.2020.5.4

Published : 2020-12-15

Vol. 65 No. 5 (2020)

Electrical properties of sugar palm nanocrystalline cellulose reinforced sugar palm starch nanocomposites

M. D. Hazrol S. M. Sapuan R. A. Ilyas M. L. Othman S. F. K. Sherwani

DOI: https://doi.org/10.14314/polimery.2020.5.4

Abstract

In this study, the effect of sugar palm nanocrystalline cellulose (SPNCC) loading (0.00–0.10 wt %) on the electrical resistance, resistivity, and conductivity of SPS/SPNCC (SPS – sugar palm starch) nanocomposite films were evaluated. The experiments were conducted using the four-probe method and Ohm’s law, resistivity and conductivity equations were utilized to obtain the electrical properties. The results revealed that the resistivity values of SPS/SPNCC films were found to be in the range of 3.1 · 102 to 1.5 · 104 (Ω · cm).

Keywords

sugar palm nanocellulose ; sugar palm starch ; biopolymer ; resistivity ; conductivity nanoceluloza z palmy cukrowej ; skrobia z palmy cukrowej ; biopolimer ; rezystywność ; przewodnictwo

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Hazrol, M. D., Sapuan, S. M., Ilyas, R. A., Othman, M. L., & Sherwani, S. F. K. (2020). Electrical properties of sugar palm nanocrystalline cellulose reinforced sugar palm starch nanocomposites. Polimery, 65(5), 363–372. https://doi.org/10.14314/polimery.2020.5.4

References

Naik J.B., Mishra S.: Polymer-Plastics Technology and Engineering 2005, 44, 687. http://dx.doi.org/10.1081/PTE-200057818

[2] Hazrol M.D., Sapuan S.M., Zuhri M.Y.M., Ilyas R.A.: “Electrical properties of sugar palm nanocellulose fiber reinforced sugar palm starch biopolymer composite”, Prosiding Seminar Enau Kebangsaan 2019, Bahau, Negeri Sembilan, Malaysia: Institute of Tropical Forest and Forest Products (INTROP), Universiti Putra Malaysia 2019, pp. 57–62.

[3] Malik R., Kim H., Kim Y., Kim K.J.: Ceramics International 2018, 44, 16394. http://dx.doi.org/10.1016/j.ceramint.2018.06.049

[4] Xie G., Ding D., Zhang G.: Advances in Physics: X 2018, 3, 719. http://dx.doi.org/10.1080/23746149.2018.1480417

[5] Bhardwaj G.: “Measurment of electrical conductivity of natural fiber composite” MTech Thesis, National Institute of Technology, Rourkela 2013.

[6] Jumaidin R., Ilyas R.A., Saiful M. et al.: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2019, 61, 273.

[7] Jumaidin R., Saidi Z.A.S., Ilyas R.A. et al.: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2019, 62, 43.

[8] Saifulazry S., Al O., Tahir P. et al.: International Journal of Recent Technology and Engineering 2019, 8, 528. http://dx.doi.org/10.35940/ijrte.B1104.0782S419

[9] Maisara A.M.N., Ilyas R.A., Sapuan S.M. et al.: International Journal of Recent Technology and Engineering 2019, 8, 510. http://dx.doi.org/10.35940/ijrte.b1100.0782s419

[10] Ilyas R.A., Sapuan S.M., Ibrahim R. et al.: Journal of Biobased Materials and Bioenergy 2020, 14, 1. http://dx.doi.org/10.1166/jbmb.2020.1951

[11] Atikah M.S.N., Ilyas R.A., Sapuan S.M. et al.: Polimery 2019, 64, 27. http://dx.doi.org/10.14314/polimery.2019.10.5

[12] Norizan M.N., Abdan K., Ilyas R.A.: Polimery 2020,65, 34. http://dx.doi.org/10.14314/polimery.2020.2.5

[13] Nurazzi N.M., Khalina A., Sapuan S.M., Ilyas R.A.: Polimery 2019, 64, 12. http://dx.doi.org/10.14314/polimery.2019.10.3

[14] Atiqah A., Jawaid M., Sapuan S.M. et al.: Journal of Materials Research and Technology 2019, 8, 3726. http://dx.doi.org/10.1016/j.jmrt.2019.06.032

[15] Sanyang M.L., Ilyas R.A., Sapuan S.M., Jumaidin R.: “Bionanocomposites for Packaging Applications” (Eds. Jawaid M., Swain S.K.), Cham: Springer International Publishing, 2018, pp. 125–147. http://dx.doi.org/10.1007/978-3-319-67319-6_7

[16] Ilyas R.A., Sapuan S.M., Ibrahim R. et al.: Journal of Materials Research and Technology 2019, 8, 4819. http://dx.doi.org/10.1016/j.jmrt.2019.08.028

[17] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: International Journal of Biological Macromolecules 2019, 123, 379. http://dx.doi.org/10.1016/j.ijbiomac.2018.11.124

[18] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: BioResources 2017, 12, 8734.http://dx.doi.org/10.15376/biores.12.4.8734-8754

[19] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: Carbohydrate Polymers 2018, 202, 186. http://dx.doi.org/10.1016/j.carbpol.2018.09.002

[20] Ilyas R.A., Sapuan S.M., Ibrahim R. et al.: Journal of Materials Research and Technology 2019, 8, 2753. http://dx.doi.org/10.1016/j.jmrt.2019.04.011

[21] Sahari J., Sapuan S.M., Zainudin E.S., Maleque M.A.: Journal of Biobased Materials and Bioenergy 2013, 7, 90. http://dx.doi.org/10.1166/jbmb.2013.1267

[22] Radzi A.M., Sapuan S.M., Jawaid M., Mansor M.R.: BioResources 2018, 13, 6238.

[23] Sapuan S.M., Ilyas R.A.: INTROPica 2017, pp. 5–7.

[24] Sapuan S.M., Ishak M.R., Leman Z. et al.: INTROPica 2017, pp. 12–13.

[25] Ilyas R.A., Sapuan S.M., Sanyang M.L. et al.: Current Analytical Chemistry 2018, 14, 203. http://dx.doi.org/10.2174/1573411013666171003155624

[26] Ilyas R.A., Sapuan S.M., Ishak M.R. et al.: “Sugar Palm Biofibers, Biopolymers, and Biocomposites” First Edition, Boca Raton, FL : CRC Press/Taylor & Francis Group, CRC Press 2018, pp. 189–219. http://dx.doi.org/10.1201/9780429443923-10

[27] Mazani N., Sapuan S.M., Sanyang M.L. et al.: “Lignocellulose for Future Bioeconomy”, Elsevier, 2019, pp. 315–332. http://dx.doi.org/10.1016/B978-0-12-816354-2.00017-7

[28] Abral H., Basri A., Muhammad F. et al.: Food Hydrocolloids 2019, 93, 276. http://dx.doi.org/10.1016/j.foodhyd.2019.02.012

[29] Abral H., Ariksa J., Mahardika M. et al.: Food Hydrocolloids 2020, 98, 105266. http://dx.doi.org/10.1016/j.foodhyd.2019.105266

[30] Abral H., Ariksa J., Mahardika M. et al.: Polymer Testing 2019, 106186. http://dx.doi.org/10.1016/j.polymertesting.2019.106186

[31] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: IOP Conference Series: Materials Science and Engineering 2018, 368, 12006. http://dx.doi.org/10.1088/1757-899X/368/1/012006

[32] Ilyas R.A, Sapuan S.M., Ishak M.R., Zainudin E.S.: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2018, 51, 234.

[33] Ilyas R.A., Sapuan S.M., Atiqah A. et al.: Polymer Composites 2019, 1–9. http://dx.doi.org/10.1002/pc.25379

[34] Tsanov T., Mokreva P., Terlemezyan L.: Polymers and Polymer Composites 1997, 5, 299.

[35] Whetzel J.: “Why Is Conductivity Important?”, SciencingCom 2017.

[36] Sanyang M.L., Sapuan S.M., Jawaid M. et al.: BioResources 2016, 11, 4134. http://dx.doi.org/10.15376/biores.11.2.4134-4145

[37] Ilyas R.A., Sapuan S.M., Ishak M.R.: Carbohydrate Polymers 2018, 181, 1038. http://dx.doi.org/10.1016/j.carbpol.2017.11.045

[38] Halimatul M.J., Sapuan S.M., Jawaid M. et al.: Polimery 2019, 64, 27. http://dx.doi.org/10.14314/polimery.2019.9.4

[39] Halimatul M.J., Sapuan S.M., Jawaid M. et al.: Polimery 2019, 64, 32. http://dx.doi.org/10.14314/polimery.2019.6.5

[40] Orlova T.S., Popov V.V., Quispe Cancapa J. et al.: Journal of the European Ceramic Society 2011, 31, 1317. http://dx.doi.org/10.1016/j.jeurceramsoc.2010.06.015

[41] Lukianova O.A., Khmara A.N., Perevislov S.N. et al.: Ceramics International 2018. http://dx.doi.org/10.1016/j.ceramint.2018.09.198

[42] Sołtys M., Górny A., Pisarska J., Pisarski W.A.: Journal of Non-Crystalline Solids 2018, 498, 352. http://dx.doi.org/10.1016/j.jnoncrysol.2018.03.033

[43] Devi D.S.P., Bipinbal P.K., Jabin T., Kutty S.K.N.: Journal of Materials & Design 2013, 43, 337. http://dx.doi.org/10.1016/j.matdes.2012.06.042

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

M. D. Hazrol

Affiliation
Universiti Putra Malaysia, Department of Mechanical and Manufacturing Engineering, Advanced Engineering Materials and Composites Research Centre (AEMC), 43400 UPM Serdang, Selangor, Malaysia

S. M. Sapuan sapuan@upm.edu.my

Affiliation
Universiti Putra Malaysia, Department of Mechanical and Manufacturing Engineering, Advanced Engineering Materials and Composites Research Centre (AEMC), 43400 UPM Serdang, Selangor, Malaysia

R. A. Ilyas

Affiliation
Universiti Putra Malaysia, Department of Mechanical and Manufacturing Engineering, Advanced Engineering Materials and Composites Research Centre (AEMC), 43400 UPM Serdang, Selangor, Malaysia

M. L. Othman

Affiliation
Universiti Putra Malaysia, Department of Electrical and Electronic Engineering, 43400 UPM Serdang, Selangor, Malysia

S. F. K. Sherwani

Affiliation
Universiti Putra Malaysia, Department of Mechanical and Manufacturing Engineering, Advanced Engineering Materials and Composites Research Centre (AEMC), 43400 UPM Serdang, Selangor, Malaysia