Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles

M. J. Halimatul; S. M. Sapuan; M. Jawaid; M. R. Ishak; R. A. Ilyas

doi:10.14314/polimery.2019.9.4

Published : 2021-01-12

Vol. 64 No. 9 (2019)

Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles

M. J. Halimatul S. M. Sapuan M. Jawaid M. R. Ishak R. A. Ilyas

DOI: https://doi.org/10.14314/polimery.2019.9.4

Abstract

The influence of addition of 10, 20, 30, 40 and 50 wt % sugar palm particles (SPP) on the water absorption properties of thermoplastic sago starch biopolymer composite films was investigated. The fillers were mechanically stirred with thermoplastic sagostarch mixtures for 30 minutes at 80 °C. The prepared films were then characterized for water absorption and water solubility. The SPP successfully reduce water absorption and thus increase barrier properties of thermoplastic sago starch biopolymer composite against water penetration, resulting in a more durable biocomposite films.

Keywords

thermoplastic sago starch ; biopolymer composite films ; water absorption ; sugar palm particles termoplastyczna skrobia sago ; biopolimerowe folie kompozytowe ; absorpcja wody ; cząstki cukru palmowego

Similar Articles

M. Żenkiewicz, S. Lutomirski, Effect of heat on some properties of surface layer of polymeric films used for vacuum forming , Polimery: Vol. 51 No. 6 (2006)
M. Żenkiewicz, J. Richert, A. Różański, Effects of blow molding ratio on mechanical properties of polylactide nanocomposite films , Polimery: Vol. 55 No. 11-12 (2010)
B. Nowak, J. Pająk, S. Łabużek, G. Rymarz, E. Talik, Biodegradation of poly(ethylene terephthalate) modified with polyester "Bionolle®" by Penicillium funiculosum , Polimery: Vol. 56 No. 1 (2011)
J. Jaglarz, J. Cisowski, D. Bogdał, A. Kassiba, J. Sanetra, A study of polymeric films modified with SiC nanoparticles , Polimery: Vol. 55 No. 5 (2010)
W. M. Rzymski, H. J. Radusch, Thermoplastic elastomers manufactured of polymer blends , Polimery: Vol. 47 No. 4 (2002)
D. Żuchowska, R. Steller, W. Meissner, Polymer composites susceptible to biodegradation , Polimery: Vol. 52 No. 7-8 (2007)
W. M. Rzymski, H.-J. Radusch, New thermoplastic elastomers , Polimery: Vol. 50 No. 4 (2005)
R. Liénard, T. Josse, J. De Winter, F. Dubois, P. Gerbaux, O. Coulembier, Preparation of highly pure cyclo-polylactides by optimization of the copper-catalyzed azide-alkyne cycloaddition reaction , Polimery: Vol. 62 No. 4 (2017)
E. Rudnik, E. Żukowska, Studies on preparation of starch succinate by reactive extrusion , Polimery: Vol. 49 No. 2 (2004)
E. Malinowska-Pańczyk, H. Staroszczyk, K. Gottfried, I. Kołodziejska, A. Wojtasz-Pająk, Antimicrobial properties of chitosan solutions, chitosan films and gelatin-chitosan films , Polimery: Vol. 60 No. 11-12 (2015)

<< < 2 3 4 5 6 7 8 9 10 11 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Halimatul, M. J., Sapuan, S. M., Jawaid, M., Ishak, M. R., & Ilyas, R. A. (2021). Water absorption and water solubility properties of sago starch biopolymer composite films filled with sugar palm particles. Polimery, 64(9), 595–603. https://doi.org/10.14314/polimery.2019.9.4

References

“Solid waste and public cleansing management act amendment” Section 73 (4), MDC Publisher Pte Ltd., Kuala Lumpur 2009. faolex.fao.org/docs/texts/mal74261.doc

[2] Hafiz Isa: “Waste Management in Malaysia” https://www.researchgate.net/publication/293820704

[3] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: Carbohydrate Polymers 2018, 202, 186. http://dx.doi.org/10.1016/j.carbpol.2018.09.002

[4] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: IOP Conference Series: Materials Science and Engineering 2018, 368, 012006. http://dx.doi.org/10.1088/1757-899X/368/1/012006

[5] Ilyas R.A., Sapuan S.M., Sanyang M.L., Ishak M.R.: “5th Postgraduate Seminar on Natural Fiber Composites”, Universiti Putra Malaysia , Serdang, Selangor 2016, pp. 82–87.

[6] Abral H., Basri A., Muhammad F. et al.: Food Hydrocolloids 2019, 02, 01. http://dx.doi.org/10.1016/j.foodhyd.2019.02.012

[7] Nazrin A., Sapuan S.M., Ilyas R.A.: “6th Postgraduate Seminar on Natural Fiber Reinforced Polymer Composites”, Serdang 2018, pp. 79–84.

[8] Halimatul M.J., Sapuan S.M., Jawaid M. et al.: Polimery 2019, 64, 32. http://dx.doi.org/10.14314/polimery.2019.6.5

[9] Ilyas R.A., Sapuan S.M., Ishak M.R. et al.: “6th Postgraduate Seminar on Natural Fiber Reinforced Polymer Composites”, Serdang 2018, pp. 55–59.

[10] Sapuan S.M., Ilyas R.A.: INTROPica 2017, pp. 5–7.

[11] Sapuan S.M., Ishak M.R., Leman Z., Ilyas R.A., Huzaifah M.R.M.: INTROPica 2017, pp. 12–13.

[12] Cañigueral N., Vilaseca F., Méndez J.A. et al.: Chemical Engineering Science 2009, 64, 2651. http://dx.doi.org/10.1016/j.ces.2009.02.006

[13] Ilyas R.A., Sapuan S.M., Sanyang M.L. et al.: Current Analytical Chemistry 2018, 14, 203. http://dx.doi.org/10.2174/1573411013666171003155624

[14] Karim A.A., Tie A.P.-L., Manan D.M.A., Zaidul I.S.M.: Comprehensive Reviews in Food Science and Food Safety 2008, 7, 215. http://dx.doi.org/10.1111/j.1541-4337.2008.00042.x

[15] Ilyas R.A., Sapuan S.M., Ishak M.R.: Carbohydrate Polymers 2018, 181, 1038. http://dx.doi.org/10.1016/j.carbpol.2017.11.045

[16] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: BioResources 2017, 12, 8734. http://dx.doi.org/10.15376/biores.12.4.8734-8754

[17] Sanyang M.L., Ilyas R.A., Sapuan S.M., Jumaidin R.: “Bionanocomposites for Packaging Applications”, Springer International Publishing, Cham 2018, p. 125. ISBN 9783319673196.

[18] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: International Journal of Biological Macromolecules 2019, 123, 379. http://dx.doi.org/10.1016/j.ijbiomac.2018.11.124

[19] Ilyas R.A., Sapuan S.M., Ishak M.R., Zainudin E.S.: Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 2018, 51, 234.

[20] Ilyas R.A., Sapuan S.M., Ishak M.R. et al.: “Sugar Palm Biofibers, Biopolymers, and Biocomposites” First Edition (Eds. Sapuan S.M., Ishak M.R., Sanyang M.L., Sahari J.), CRC Press, Taylor & Francis Group, 2018, pp. 189–220. ISBN 9780429443923.

[21] Ilyas R.A., Sapuan S.M., Ishak M.R. et al.: Proceeding 5th International Conference on Applied Sciences and Engineering (ICASEA 2018), Capthorne Hotel, Cameron Highlands, Malaysia 2018, pp. 325–341.

[22] Sapuan S.M., Ilyas R.A., Ishak M.R. et al.: “Sugar Palm Biofibers, Biopolymers, and Biocomposites” First Edition (Eds. Sapuan S.M., Ishak M.R., Sanyang M.L., Sahari J.), CRC Press, Taylor & Francis Group, 2018, pp. 245–266. ISBN 9780429443923.

[23] Sahari J., Salit M.S., Zainudin E.S., Maleque M.A.: Fibers and Textiles in Eastern Europe 2014, 22, 96.

[24] Sanyang M.L., Sapuan S.M., Jawaid M. et al.: BioResources 2016, 11, 4134. http://dx.doi.org/10.15376/biores.11.2.4134-4145

[25] Sahari J., Sapuan S.M., Zainudin E.S., Maleque M.A.: Procedia Chemistry 2012, 4, 254. http://dx.doi.org/10.1016/j.proche.2012.06.035

[26] Zuluaga R., Putaux J.-L.L., Restrepo A. et al.: Cellulose 2007, 14, 585. http://dx.doi.org/10.1007/s10570-007-9118-z

[27] Vallejos M.E., Curvelo A.A.S., Teixeira E.M. et al.: Industrial Crops and Products 2011, 33, 739. http://dx.doi.org/10.1016/j.indcrop.2011.01.014

[28] Belhassen R., Boufi S., Vilaseca F. et al.: Polymers for Advanced Technologies 2009, 20, 1068. http://dx.doi.org/10.1002/pat.1364

[29] Corradini E., de Morais L.C., de Rosa F.M. et al.: Macromolecular Symposia 2006, 245–246, 558. http://dx.doi.org/10.1002/masy.200651380

[30] Gironès J., López J.P., Mutjé P. et al.: Composites Science and Technology 2012, 72, 858. http://dx.doi.org/10.1016/j.compscitech.2012.02.019

[31] Donhowe G., Fennema O.: Journal of the American Oil Chemists’ Society 1993, 70, 867. http://dx.doi.org/10.1007/BF02545345

[32] Zhang Y., Han J.H.: Journal of Food Science 2008, 73, E313. http://dx.doi.org/10.1111/j.1750-3841.2008.00867.x

[33] Mali S., Sakanaka L.S., Yamashita F., Grossmann M.V.E.: Carbohydrate Polymers 2005, 60, 283. http://dx.doi.org/10.1016/j.carbpol.2005.01.003

[34] Godbillot L., Dole P., Joly C. et al.: Food Chemistry 2006, 96, 380. http://dx.doi.org/10.1016/j.foodchem.2005.02.054

[35] De Carvalho A.J.F., Curvelo A.A.S., Agnelli J.A.M.: International Journal of Polymeric Materials 2002, 51, 647. http://dx.doi.org/10.1080/714975803

[36] Henrique C.M., Teófilo R.F., Sabino L. et al.: Journal of Food Science 2007, 72, E184. http://dx.doi.org/10.1111/j.1750-3841.2007.00342.x

[37] Ilyas R.A., Sapuan S.M., Ibrahim R. et al.: Journal of Materials Research and Technology 2019. http://dx.doi.org/10.1016/j.jmrt.2019.04.011

[38] Mazani N., Sapuan S.M., Sanyang M.L., Atiqah A., Ilyas R.A.: Lignocellulose for Future Bioeconomy. Elsevier 2019, 315–332. http://dx.doi.org/10.1016/B978-0-12-816354-2.00017-7

[39] Bertuzzi M .A., C astro V idaurre E .F., A rmada M ., Gottifredi J.C.: Journal of Food Engineering 2007, 80, 972. http://dx.doi.org/10.1016/j.jfoodeng.2006.07.016

[40] Prachayawarakorn J., Sangnitidej P., Boonpasith P.: Carbohydrate Polymers 2010, 81, 425. http://dx.doi.org/10.1016/j.carbpol.2010.02.041

Google Scholar

Altmetric indicators

Citing articles via

P. Kalyani, A. Muthupandeeswari, S. Sundar Pethaiah (2022)

Studies on the diversified properties of stannic oxide filled PVA nanocomposite (PVA-xSnO2) films. Materials Today: Proceedings, 64, 1750.
10.1016/j.matpr.2022.06.020

R. Ganapathy Srinivasan, C. Rajaravi, S. Palani, S. Karthik (2023)

Materials, Design and Manufacturing for Sustainable Environment. Lecture Notes in Mechanical Engineering, 67.
10.1007/978-981-19-3053-9_6

Deyan Kong, Jie Li, Anru Guo, Xintong Zhang, Xinli Xiao (2019)

Self-healing high temperature shape memory polymer. European Polymer Journal, 120, 109279.
10.1016/j.eurpolymj.2019.109279

Sana Riaz, Abid Aslam Maan, Masood Sadiq Butt, Muhammad Kashif Iqbal Khan (2024)

Valorization of agricultural residues in the development of biodegradable active packaging films. Industrial Crops and Products, 215, 118587.
10.1016/j.indcrop.2024.118587

Abdul Moudood, Anisur Rahman, Nayeem Md Lutful Huq, Andreas Öchsner, Md Mainul Islam, Gaston Francucci (2020)

Mechanical properties of flax fiber‐reinforced composites at different relative humidities: Experimental, geometric, and displacement potential function approaches. Polymer Composites, 41(12), 4963.
10.1002/pc.25766

R.A. Ilyas, S.M. Sapuan, Abudukeremu Kadier, Mohd Sahaid Kalil, Rushdan Ibrahim, M.S.N. Atikah, N. Mohd Nurazzi, A. Nazrin, C.H. Lee, Mohd Nor Faiz Norrrahim, Nasmi Herlina Sari, Edi Syafri, Hairul Abral, Latifah Jasmani, M.I.J. Ibrahim (2020)

Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers. 111.
10.1016/B978-0-12-819661-8.00008-1

R.A Ilyas, S.M Sapuan, L.N. Megashah, Rushdan. Ibrahim, M.S.N. Atikah, Z.M.A. Ainun, Min Min Aung, S.O.A. SaifulAzry, C.H. Lee (2021)

Bio‐based Packaging. 467.
10.1002/9781119381228.ch27

R.A. Ilyas, S.M. Sapuan, Rushdan Ibrahim, Hairul Abral, M.R. Ishak, E.S. Zainudin, M.S.N. Atikah, N. Mohd Nurazzi, A. Atiqah, M.N.M. Ansari, Edi Syafri, Mochamad Asrofi, Nasmi Herlina Sari, R. Jumaidin (2019)

Effect of sugar palm nanofibrillated cellulose concentrations on morphological, mechanical and physical properties of biodegradable films based on agro-waste sugar palm (Arenga pinnata (Wurmb.) Merr) starch. Journal of Materials Research and Technology, 8(5), 4819.
10.1016/j.jmrt.2019.08.028

RA Ilyas, SM Sapuan, MSN Atikah, MRM Asyraf, S Ayu Rafiqah, HA Aisyah, N Mohd Nurazzi, MNF Norrrahim (2021)

Effect of hydrolysis time on the morphological, physical, chemical, and thermal behavior of sugar palm nanocrystalline cellulose (Arenga pinnata (Wurmb.) Merr). Textile Research Journal, 91(1-2), 152.
10.1177/0040517520932393

Javeed Ahmed, M.A. Balaji, S.S. Saravanakumar, P. Senthamaraikannan (2021)

A Comprehensive Physical, Chemical and Morphological Characterization of Novel Cellulosic Fiber Extracted from the Stem of Elettaria Cardamomum Plant. Journal of Natural Fibers, 18(10), 1460.
10.1080/15440478.2019.1691121

V Mohanavel, T Sathish, M. Ravichandran, P Ganeshan, M.M. Ravi Kumar, Ram Subbiah (2021)

Experimental investigations on mechanical properties of cotton/hemp fiber reinforced epoxy resin hybrid composites. Journal of Physics: Conference Series, 2027(1), 012015.
10.1088/1742-6596/2027/1/012015

Hamza EL Etri, Mehmet Ziya Polat, Emin Burak Özyılmaz (2024)

Classification, applications, and impact behavior of composite materials: A review. Mechanics of Advanced Materials and Structures, 31(30), 12592.
10.1080/15376494.2024.2326665

Rumana Farheen Sagade Muktar Ahmed, Mizba Tazleem Sagade Mokthar Ahamed, Sangamesha Madanahalli Ankanathappa, Krishnaveni Sannathammegowda (2024)

Flower Extract–Polyvinyl Alcohol‐Based Biocomposites for Sustainable Food Packaging Applications. physica status solidi (a), 221(12),
10.1002/pssa.202300985

Usman Lawal, Ravi Babu Valapa (2021)

Bio‐based Packaging. 319.
10.1002/9781119381228.ch18

Sudhanshu Singh, Zunjarrao Kamble, Ghanshyam Neje (2024)

Textile-reinforced composite structural-health monitoring systems. Textile Progress, 56(4), 415.
10.1080/00405167.2024.2422749

S. Abhitha, P. Amulya, Aman Dubey, BVS Praveen, P. Madhuri (2025)

Comparative Analysis of Bioplastic Sheets Derived from Biowaste Using Various Plasticizers. Arabian Journal for Science and Engineering, 50(13), 9831.
10.1007/s13369-024-09891-w

Priscila Dayane de Freitas Santos, Larissa do Val Siqueira, Carmen Cecilia Tadini, Carmen Sílvia Favaro-Trindade (2023)

Characterization of Cassava Starch Extruded Sheets Incorporated with Tucumã Oil Microparticles. Processes, 11(3), 876.
10.3390/pr11030876

Khadiga A. A. Abou-Taleb, Amr Elkelish, Nada Z. Mahdi, Maha F. Lotfy, Anwar M. Adss, Tarek H. Taha, Suhailah S. Aljameel, Marwa Y. Mohamed, Fauzeya M. Albalwe, Rania F. Ahmed (2025)

Maximizing Polylactic Acid Bioplastic Yield from Lactobacillus rhamnosus L6 via Response Surface Methodology: Evaluating Antimicrobial Effectiveness, Physical, and Chemical Properties of PLA. ACS Omega, 10(29), 32038.
10.1021/acsomega.5c03643

Mohammad Azad Alam, S.M. Sapuan, H.H. Ya, P.B. Hussain, Mohammad Azeem, R.A. Ilyas (2021)

Biocomposite and Synthetic Composites for Automotive Applications. 1.
10.1016/B978-0-12-820559-4.00001-8

Flávio James Humberto Tommasini Vieira Ramos, Raphael Henrique Morais Reis, Iryna Grafova, Andriy Grafov, Sergio Neves Monteiro (2020)

Eco-friendly recycled polypropylene matrix composites incorporated with geopolymer concrete waste particles. Journal of Materials Research and Technology, 9(3), 3084.
10.1016/j.jmrt.2020.01.054

S.M. Sapuan, R.A. Ilyas, M.R.M. Asyraf, A. Suhrisman, T.M.N. Afiq, M.S.N. Atikah, R. Ibrahim (2021)

Roselle. 177.
10.1016/B978-0-323-85213-5.00006-8

R.A. Ilyas, S.M. Sapuan, M.S. Ibrahim, M.H. Wondi, M.N.F. Norrrahim, M.M. Harussani, H.A. Aisyah, M.A. Jenol, Z. Nahrul Hayawin, M.S.N. Atikah, R. Ibrahim, S.O.A. SaifulAzry, C.S. Hassan, N.I.N. Haris (2022)

Oil Palm Biomass for Composite Panels. 217.
10.1016/B978-0-12-823852-3.00012-X

Natalia P. Prorokova, Tatyana Yu. Kumeeva, Igor V. Kholodkov (2022)

Wear-Resistant Hydrophobic Coatings from Low Molecular Weight Polytetrafluoroethylene Formed on a Polyester Fabric. Coatings, 12(9), 1334.
10.3390/coatings12091334

R.A. Ilyas, S.M. Sapuan, W. Kirubaanand, Z.M. Zahfiq, M.S.N. Atikah, R. Ibrahim, A.M. Radzi, R. Nadlene, M.R.M. Asyraf, M.D. Hazrol, S.F.K. Sherwani, M.M. Harussani, J. Tarique, A. Nazrin, R. Syafiq (2021)

Roselle. 1.
10.1016/B978-0-323-85213-5.00009-3

R.A. Ilyas, M.R.M. Asyraf, S.M. Sapuan, T.M.N. Afiq, A. Suhrisman, M.S.N. Atikah, R. Ibrahim (2021)

Roselle. 197.
10.1016/B978-0-323-85213-5.00002-0

Yuqian Liu, Jinguang Liu, Jing Kong, Rui Wang, Min Liu, Padraig Strappe, Chris Blanchard, Zhongkai Zhou (2020)

Citrate esterification of debranched waxy maize starch: Structural, physicochemical and amylolysis properties. Food Hydrocolloids, 104, 105704.
10.1016/j.foodhyd.2020.105704

R.A. Ilyas, S.M. Sapuan, M.R.M. Asyraf, M.S.N. Atikah, R. Ibrahim, Mohd N.F. Norrrahim, Tengku A.T. Yasim‐Anuar, Liana N. Megashah (2021)

Mechanical and Dynamic Properties of Biocomposites. 49.
10.1002/9783527822331.ch3

Rui‐Jing Jia, Ke‐Yong Teng, Jia‐Yi Huang, Xin Wei, Zhi‐Yong Qin (2022)

Hydrogen Bonding Crosslinking of Starch‐Polyvinyl Alcohol Films Reinforced by Ultrasound‐Assisted and Cellulose Nanofibers Dispersed Cellulose Nanocrystals. Starch - Stärke, 74(3-4),
10.1002/star.202100227

R. Surya, Manohar D. Mullassery, Noeline B. Fernandez, Diana Thomas, Prasad S. Jayaram (2020)

Synthesis and characterization of a pH responsive and mucoadhesive drug delivery system for the controlled release application of anti-cancerous drug. Arabian Journal of Chemistry, 13(5), 5262.
10.1016/j.arabjc.2020.03.005

Ghassan.O.A. AL-Fakih, R.A. Ilyas, M.R.M. Huzaifah, A.S. El-Shafay (2024)

Recent advances in sago (Metroxylon sagu) fibres, biopolymers, biocomposites, and their prospective applications in industry: A comprehensive review. International Journal of Biological Macromolecules, 269, 132045.
10.1016/j.ijbiomac.2024.132045

Rushdan Ilyas, Humaira Aisyah, Abu Nordin, Norzita Ngadi, Mohamed Zuhri, Muhammad Asyraf, Salit Sapuan, Edi Zainudin, Shubham Sharma, Hairul Abral, Mochamad Asrofi, Edi Syafri, Nasmi Sari, Mazlan Rafidah, Sharifah Zakaria, Muhammad Razman, Nuriah Majid, Zuliskandar Ramli, Ashraf Azmi, Sneh Bangar, Rushdan Ibrahim (2022)

Natural-Fiber-Reinforced Chitosan, Chitosan Blends and Their Nanocomposites for Various Advanced Applications. Polymers, 14(5), 874.
10.3390/polym14050874

Carmen María Granados-Carrera, Daniel Castro-Criado, Mercedes Jiménez-Rosado, Alberto Romero, Víctor Manuel Perez-Puyana (2025)

Reinforcement of soy protein-based bioplastics as potential sustainable packaging solutions. Future Foods, 11, 100524.
10.1016/j.fufo.2024.100524

R.A. Ilyas, S.M. Sapuan, M.M. Harussani, M.S.N. Atikah, R. Ibrahim, M.R.M. Asyraf, A.M. Radzi, R. Nadlene, Lau Kia Kian, Suzana Mali, Mochamad Asrofi, Sanjay Mavikere Rangappa, Suchart Siengchin (2021)

Roselle. 285.
10.1016/B978-0-323-85213-5.00003-2

R.A. Ilyas, S.M. Sapuan, Mohd Nor Faiz Norrrahim, Tengku Arisyah Tengku Yasim-Anuar, Abudukeremu Kadier, Mohd Sahaid Kalil, M.S.N. Atikah, Rushdan Ibrahim, Mochamad Asrofi, Hairul Abral, A. Nazrin, R. Syafiq, H.A. Aisyah, M.R.M. Asyraf (2020)

Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers. 65.
10.1016/B978-0-12-819661-8.00006-8

R Vijay, S. Manoharan, S. Arjun, A. Vinod, D. Lenin Singaravelu (2021)

Characterization of Silane-Treated and Untreated Natural Fibers from Stem of Leucas Aspera. Journal of Natural Fibers, 18(12), 1957.
10.1080/15440478.2019.1710651

William Ricardo Blume, Lilian Vanessa Rossa Beltrami, Edson Luiz Francisquetti, Ademir José Zattera, Betina Hansen, André Luis Catto, Cleide Borsoi (2024)

Effects of different plasticizers on the physicochemical properties of cellulose nanocrystals-reinforced corn starch films. Brazilian Journal of Chemical Engineering, 41(1), 371.
10.1007/s43153-023-00340-z

Natalia P. Prorokova, Olga I. Odintsova, Varvara E. Rumyantseva, Evgeniy V. Rumyantsev, Viktoriya S. Konovalova (2023)

Giving Improved and New Properties to Fibrous Materials by Surface Modification. Coatings, 13(1), 139.
10.3390/coatings13010139

Walid Abotbina, S. M. Sapuan, R. A. Ilyas, M. T. H. Sultan, M. F. M. Alkbir, S. Sulaiman, M. M. Harussani, Emin Bayraktar (2022)

Recent Developments in Cassava (Manihot esculenta) Based Biocomposites and Their Potential Industrial Applications: A Comprehensive Review. Materials, 15(19), 6992.
10.3390/ma15196992

Ridhwan Jumaidin, Muhammad Afif Akmal Khiruddin, Zulhelmi Asyul Sutan Saidi, Mohd Sapuan Salit, Rushdan Ahmad Ilyas (2020)

Effect of cogon grass fibre on the thermal, mechanical and biodegradation properties of thermoplastic cassava starch biocomposite. International Journal of Biological Macromolecules, 146, 746.
10.1016/j.ijbiomac.2019.11.011

R.A. Ilyas, S.M. Sapuan (2020)

The Preparation Methods and Processing of Natural Fibre Bio-polymer Composites. Current Organic Synthesis, 16(8), 1068.
10.2174/157017941608200120105616

M.D. Hazrol, S.M. Sapuan, M.Y.M. Zuhri, E.S. Zainudin, N.I.A. Wahab, R.A. Ilyas (2021)

Design for Sustainability. 329.
10.1016/B978-0-12-819482-9.00007-1

N.P. Prorokova, T.Yu. Kumeeva, D.P. Kiryukhin, G.A. Kichigina, P.P. Kushch (2020)

Coatings based on tetrafluoroethylene telomeres synthesized in trimethylchlorosilane for obtaining highly hydrophobic polyester fabrics. Progress in Organic Coatings, 139, 105485.
10.1016/j.porgcoat.2019.105485

Yifan Wang, Jinlong Gong, Qing Yang, Hui Huang (2020)

A novel impedance adapter for the time‐domain electromagnetic pulse standard field generation setup. Microwave and Optical Technology Letters, 62(5), 1964.
10.1002/mop.32279

R.A. Ilyas, S.M. Sapuan, Abudukeremu Kadier, Santhana Krishnan, M.S.N. Atikah, Rushdan Ibrahim, A. Nazrin, R. Syafiq, S. Misri, M.R.M. Huzaifah, M.D. Hazrol (2020)

Advanced Processing, Properties, and Applications of Starch and Other Bio-Based Polymers. 89.
10.1016/B978-0-12-819661-8.00007-X

R.A. Ilyas, S.M. Sapuan, F.A. Sabaruddin, M.S.N. Atikah, Rushdan Ibrahim, M.R.M. Asyraf, M.R.M. Huzaifah, S.O.A. SaifulAzry, Z.M.A. Ainun (2021)

Bio‐based Packaging. 413.
10.1002/9781119381228.ch23

R.A. Ilyas, S.M. Sapuan, N. Mohd Nurazzi, Mohd Nor Faiz Norrrahim, R. Ibrahim, M.S.N. Atikah, M.R.M. Huzaifah, A.M. Radzi, S. Izwan, A.M. Noor Azammi, R. Jumaidin, Z.M.A. Ainun, A. Atiqah, M.R.M. Asyraf, L.K. Kian, C.S. Hassan (2021)

Biocomposite and Synthetic Composites for Automotive Applications. 51.
10.1016/B978-0-12-820559-4.00003-1

Huan Hu, Ang Xu, Dianfeng Zhang, Weiyi Zhou, Shaoxian Peng, Xipo Zhao (2020)

High-Toughness Poly(lactic Acid)/Starch Blends Prepared through Reactive Blending Plasticization and Compatibilization. Molecules, 25(24), 5951.
10.3390/molecules25245951

Yousof M. Ghazzawi, Andres F. Osorio, Michael T. Heitzmann (2020)

The effect of fibre length and fibre type on the fire performance of thermoplastic composites: The behaviour of polycarbonate as an example of a charring matrix. Construction and Building Materials, 234, 117889.
10.1016/j.conbuildmat.2019.117889

A. Rozilah, C. N. Aiza Jaafar, S. M. Sapuan, I. Zainol, R. A. Ilyas (2020)

The Effects of Silver Nanoparticles Compositions on the Mechanical, Physiochemical, Antibacterial, and Morphology Properties of Sugar Palm Starch Biocomposites for Antibacterial Coating. Polymers, 12(11), 2605.
10.3390/polym12112605

R.A Ilyas, S.M Sapuan, H.A Aisyah, Rushdan Ibrahim, M.S.N. Atikah, H.N. Salwa, Min Min Aung, S.O.A. SaifulAzry, L.N. Megashah, Z.M.A. Ainun (2021)

Bio‐based Packaging. 353.
10.1002/9781119381228.ch20

Lei Feng, Haipeng Liu, Ling Li, Xiangyou Wang, Hiroaki Kitazawa, Yanyin Guo (2022)

Improving the property of a reproducible bioplastic film of glutenin and its application in retarding senescence of postharvest Agaricus bisporus. Food Bioscience, 48, 101796.
10.1016/j.fbio.2022.101796

R. A. Ilyas, S. M. Sapuan, A. Atiqah, Rushdan Ibrahim, Hairul Abral, M. R. Ishak, E. S. Zainudin, N. M. Nurazzi, M. S. N. Atikah, M. N. M. Ansari, M. R. M. Asyraf, A. B. M. Supian, Hamdan Ya (2020)

Sugar palm (Arenga pinnata [Wurmb.] Merr) starch films containing sugar palm nanofibrillated cellulose as reinforcement: Water barrier properties. Polymer Composites, 41(2), 459.
10.1002/pc.25379

R.A. Ilyas, S.M. Sapuan, A. Atiqah, M.R.M. Asyraf, N.M. Nurazzi, Mohd N. F. Norrrahim, Mohd A. Jenol, M.M. Harussani, R. Ibrahim, M.S.N. Atikah, Chandrasekar Muthukumar (2022)

Natural Fiber‐Reinforced Composites. 53.
10.1002/9783527831562.ch4

Soma A. El Mogy, Reda M. Mourad, Ahmed Abdel‐Hakim (2024)

Characterization of biodegradable composite based on microalgae modified glycerol‐plasticized‐starch films. Polymer Engineering & Science, 64(3), 1168.
10.1002/pen.26605

Alexandra Augusta Reichert, Mariana Ribas Sá, Thales Castilhos de Freitas, Renata Barbosa, Tatianny Soares Alves, Eduardo Henrique Backes, José Henrique Alano, Amanda Dantas Oliveira (2022)

Barrier, Mechanical and Morphological Properties of Biodegradable Films Based on Corn Starch Incorporated with Cellulose Obtained from Pineapple Crowns. Journal of Natural Fibers, 19(14), 8541.
10.1080/15440478.2021.1964140

Joseph Merillyn Vonnie, Kobun Rovina, Rasnarisa Awatif Azhar, Nurul Huda, Kana Husna Erna, Wen Xia Ling Felicia, Md Nasir Nur’Aqilah, Nur Fatihah Abdul Halid (2022)

Development and Characterization of the Biodegradable Film Derived from Eggshell and Cornstarch. Journal of Functional Biomaterials, 13(2), 67.
10.3390/jfb13020067

S.M. Sapuan, G. Hemapriya, R.A. Ilyas, M.S.N. Atikah, M.R.M. Asyraf, Muhd Ridzuan Mansor (2021)

Design for Sustainability. 85.
10.1016/B978-0-12-819482-9.00013-7

Ankita Bisht, Kinshuk Dasgupta, Debrupa Lahiri (2020)

Evaluating the effect of addition of nanodiamond on the synergistic effect of graphene-carbon nanotube hybrid on the mechanical properties of epoxy based composites. Polymer Testing, 81, 106274.
10.1016/j.polymertesting.2019.106274

N. P. Prorokova, T. Yu. Kumeeva, I. V. Kholodkov, V. M. Buznik (2022)

Control of the Hydrophobic Properties of Polyester Fabric Coatings Deposited Using Polytetrafluoroethylene Telomers and Silica Nanoparticles. Theoretical Foundations of Chemical Engineering, 56(5), 872.
10.1134/S0040579522050141

Weili Ma, Yuan Qin, Yanlong Li, Junrui Chai, Xianwei Zhang, Yingbiao Ma, Haimin Liu (2020)

Mechanical properties and engineering application of cellulose fiber-reinforced concrete. Materials Today Communications, 22, 100818.
10.1016/j.mtcomm.2019.100818

A.M. Radzi, Sheikh Zaki, Mohamad Hassan, R.A. Ilyas, Khairur Jamaludin, Mohd Daud, Sa’ardin Aziz (2022)

Bamboo-Fiber-Reinforced Thermoset and Thermoplastic Polymer Composites: A Review of Properties, Fabrication, and Potential Applications. Polymers, 14(7), 1387.
10.3390/polym14071387

Kittitat Sirivechphongkul, Nutchapon Chiarasumran, Maythee Saisriyoot, Anusith Thanapimmetha, Penjit Srinophakun, Kesinee Iamsaard, Yao-Tung Lin (2022)

Agri-Biodegradable Mulch Films Derived from Lignin in Empty Fruit Bunches. Catalysts, 12(10), 1150.
10.3390/catal12101150

Anna Carolina C. Neves, Lázaro A. Rohen, Dhyemila P. Mantovani, Juliana P.R.G. Carvalho, Carlos Maurício F. Vieira, Felipe P.D. Lopes, Noan Tonini Simonassi, Fernanda S. da Luz, Sergio N. Monteiro (2020)

Comparative mechanical properties between biocomposites of Epoxy and polyester matrices reinforced by hemp fiber. Journal of Materials Research and Technology, 9(2), 1296.
10.1016/j.jmrt.2019.11.056

Grishin R.A. (2025)

GRANTING HYDROPHOBIC PROPERTIES TO TEXTILE MATERIALS BY SURFACE MODIFICATION WITH POLYMERS. Izvestiya Vysshikh Uchebnykh Zavedenii Seriya Teknologiya Tekstil Noi Promyshlennosti, 1(415), 23-35.
10.47367/0021-3497_2025_1_23

Imran A.I. (2025)

Exploring the Potential of Sago Residue for Eco-Friendly Construction Materials. Bioresources, 20(3),
10.15376/biores.20.3.Imran

Anggraeni N.D. (2023)

Natural fiber heat treatment on composite material. Aip Conference Proceedings, 2772,
10.1063/5.0114929

Prorokova N.P. (2023)

APPLICATION OF TETRAFLUOROETHYLENE TELOMERS TO GIVE HIGH WATER REPELLENT PROPERTIES TO POLYESTER FABRICS. Izvestiya Vysshikh Uchebnykh Zavedenii Seriya Teknologiya Tekstil Noi Promyshlennosti, 154-163.
10.47367/0021-3497_2023_6_154

Obodo R.M. (2023)

Introduction: Review of the status of modification and functionalization of ceramic composites, progress, and perceptions. Surface Modification and Functionalization of Ceramic Composites, 1-13.
10.1016/B978-0-323-85883-0.00019-3

Banat R. (2022)

Mechanical, morphological and water absorption properties of polyethylene/olive pomace flour biocomposites. Polyolefins Journal, 9(1), 1-14.
10.22063/POJ.2021.2903.1184

Statistics

Total abstract views : 0

PDF Downloads : 0

M. J. Halimatul help@libcom.pl

Affiliation
Universiti Putra Malaysia, Institute of Tropical Forestry and Forest Products, 43400 UPM, Serdang, Selangor, Malaysia

S. M. Sapuan

Affiliation
Universiti Putra Malaysia, Institute of Tropical Forestry and Forest Products, 43400 UPM, Serdang, Selangor, Malaysia

M. Jawaid

Affiliation
Universiti Putra Malaysia, Institute of Tropical Forestry and Forest Products, 43400 UPM, Serdang, Selangor, Malaysia

M. R. Ishak

Affiliation
Universiti Putra Malaysia, Department of Aerospace Engineering, 43400 UPM, Serdang, Selangor, Malaysia

R. A. Ilyas

Affiliation
Universiti Putra Malaysia, Institute of Tropical Forestry and Forest Products, 43400 UPM, Serdang, Selangor, Malaysia