Mechanical properties of PE-PET-PS-PP blends produced by high shear mixing

Mohd Adly Rahmat Saat; Rozaidi Rasid; Maria Abu Bakar; Azman Jalar; Emee Marina Salleh

doi:10.14314/polimery.2019.10.4

Published : 2021-01-12

Vol. 64 No. 10 (2019)

Mechanical properties of PE-PET-PS-PP blends produced by high shear mixing

Mohd Adly Rahmat Saat Rozaidi Rasid Maria Abu Bakar Azman Jalar Emee Marina Salleh

DOI: https://doi.org/10.14314/polimery.2019.10.4

Abstract

This work focused on mechanical behavior of polymer by implementing high speed mixing (HSM) method of polymer blending. In this study, polyethylene (PE), poly(ethylene terephthalate) (PET), polystyrene (PS), and polypropylene (PP) were used as they are the most abundant polymers used at the current time. The research was carried out using counter rotating twin screw extruder at constant speed of 249 rpm and at 120 °C with weight mixing ratio of the plastics are 1 : 1 : 1 : 1. According to tensile study, stress strain curve of the HSM sample exhibited an alloy-like characteristic. With references to other type of virgin polymers and some polymer blends the yield stress, Young’s modulus and strain rate of high-speed mixing were quite comparable to the other samples.

Keywords

polymer recycling ; high speed mixing ; polymer blending ; mechanical blending ; mechanical properties recykling polimerów ; mieszanie z dużą szybkością ścinania ; mieszanie polimerów ; mieszanie mechaniczne ; właściwości mechaniczne

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Saat, M. A. R., Rasid, R., Bakar, M. A., Jalar, A., & Salleh, E. M. (2021). Mechanical properties of PE-PET-PS-PP blends produced by high shear mixing. Polimery, 64(10), 676-679. https://doi.org/10.14314/polimery.2019.10.4

References

U.S. Environmental Protection Agency: “Statistics on the Management of Used and End-of-Life Electronics” 2010.
Crossref (11.2.2016)

[2] Ramya M., Subapriya M.S., Nalini B.: Journal of Nutrition and Food Science 2015, 5, 5.
Crossref

[3] Flaifel M.H., Hj Ahmad S., Hassan A. et al.: Composites: Part B 2013, 52, 334.
Crossref

[4] Chen R.S., Hj Ahmad S., Gan S. et al.: Thermochimica 2016, 640, 52.
Crossref

[5] Carey P., Carty G., Donlon B. et al.: “Landfill manuals landfill site design”, Environmental Protection Agency, Wexford 2000, p. 11.

[6] Kibria G.: “Plastic Waste, Plastic Pollution – A Threat to All Nations” Technical Report 2017.
Crossref

[7] Chung C.I.: “Extrusion of Polymers Theory & Practice”, Hanser Publishers, Munich Hanser Publications, Cincinnati 2000, p. 27.

[8] La Mantia F.P.: “Recycling of PVC and Mixed Plastics”, WastesChemTec Publishing, Toronto 1996, pp. 122–127.

[9] La Mantia F.P.: Progress in Rubber, Plastics and Recycling Technology 2004, 20 (1), 11.
Crossref

[10] Ab Ghani M.H., Hj Ahmad S.: Advances in Materials Science and Engineering 2011, Article ID 406284.
Crossref

[11] Chen R.S., Salleh M., Ghani M.: BioResources 2015, 10, 6872.
Crossref

[12] ASTM International, Tensile Testing, USA, #05106G (2004).

[13] Tong J.Y., Royan N.R.R., Ng Y.C.: Advances in Materials Science and Engineering 2014, Article ID 938961.
Crossref

[14] Hutanua R., Claphama L., Rogge R.B.: Acta Materialia 2005, 53, 3517.
Crossref

[15] Jamil M.S., Ahmad I., Abdullah I.: Journal of Polymer Research 2006, 13, 315.
Crossref

[16] Hoy R.S., Robbins M.O.: Polymer Science Part B: Polymer Physics 2006, 44, 3487.
Crossref

[17] Zander N.E., Gillan M., Sweetser D.: Materials 2017, 10, 1044.
Crossref

[18] Strapasson R., Amico S.C., Pereira M.F.R., Sydenstricker T.H.D.: Polymer Testing 2005, 24, 468.
Crossref

[19] Milisavljevic-Syed J., Petrovic E., Ćirić I. et al.: “Tensile testing for different types of polymers“, DAS-29, 29th Danubia-Adria Symposium, University of Belgrade, Serbia, September 2012.

[20] Mancini S.D., Zanin M.: Materials Research 1999, 2, 33.

[21] Pournaghshband A., Mehrabzadeh M., Morshedian J.: Polymer Journal 2012, 45, 346.
Crossref

Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 216

PDF Downloads : 270

Mohd Adly Rahmat Saat help@libcom.pl

Affiliation
National University of Malaysia, School of Applied Physics, 43600 Bangi, Selangor

Rozaidi Rasid

Affiliation
National University of Malaysia, School of Applied Physics, 43600 Bangi, Selangor

Maria Abu Bakar

Affiliation
National University of Malaysia, Institute of Microengineering and Nanoelectronics (IMEN), 43600 Bangi, Selangor

Azman Jalar

Affiliation
National University of Malaysia, Institute of Microengineering and Nanoelectronics (IMEN), 43600 Bangi, Selangor

Emee Marina Salleh

Affiliation
National University of Malaysia, School of Applied Physics, 43600 Bangi, Selangor