X-ray photoelectron spectroscopy studies of laser induced polylactide surface layer modification

K. Moraczewski

doi:10.14314/polimery.2014.717

Published : 2014-10-30

Vol. 59 No. 10 (2014)

X-ray photoelectron spectroscopy studies of laser induced polylactide surface layer modification

K. Moraczewski

DOI: https://doi.org/10.14314/polimery.2014.717

Abstract

The results of the studies of the polylactide surface layer laser induced modification are presented. Various fluence values (Ej) and numbers of laser pulses were applied to modify the surface layer. The method of photoelectron spectroscopy was applied to investigate the chemical composition and the degree of oxidation of the surface layer of the unmodified and modified polylactide. There was found a change in the chemical composition and the degree of oxidation. The alterations depended on the fluence and the number of laser pulses applied.

Keywords

polylactide ; laser induced modification ; photoelectron spectroscopy polilaktyd ; modyfikowanie indukowane laserem ; rentgenowska spektroskopia fotoelektronowa

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Moraczewski, K. (2014). X-ray photoelectron spectroscopy studies of laser induced polylactide surface layer modification. Polimery, 59(10), 717–721. https://doi.org/10.14314/polimery.2014.717

References

Nampoothiri M., Nair N., John R.: Bioresour. Technol. 2010, 101, 8493. http://dx.doi.org/10.1016/jbiortech/2010.05.092

[2] Żenkiewicz M.: „Adhezja i modyfikowanie warstwy wierzchniej tworzyw wielocząsteczkowych”, WNT, Warszawa 2000.

[3] Yang J., Wan Y.Q., Wang S.G., Tu C.F., Cai Q., Bei J.Z.: Polym. Int. 2003, 52, 1892. http://dx.doi.org/10.1002/pi.1272

[4] Stepczyńska M., Żenkiewicz M.: Przem. Chem. 2010, 89, 1637.

[5] Rytlewski P., Żenkiewicz M.: Polimery 2007, 52, 243.

[6] Kusiński J.: „Lasery i ich zastosowanie w inżynierii materiałowej”, Wydawnictwo Naukowe Akapit, Kraków 2000.

[7] Ziętek B.: „Lasery”, Wydawnictwo Naukowe Uniwersytetu Mikołaja Kopernika, Toruñ 2009.

[8] Adhi K.P., Owings R.L., Railkar T.A., BrownW.D., Malshe A.P.: Appl. Surf. Sci. 2004, 225, 324. http://dx.doi.org/10.1016/j.ap.susc.2003.10.034

[9] Zheng H.Y., Tan T.T., Zhou W.: Opt. Lasers Eng. 2009, 47, 180. http://dx.doi.org/10.1016/j.optlaseng.2008.06.015

[10] Rytlewski P., Mróz W., Żenkiewicz M., Czwartos J., Budner B.: J. Mater. Process. Technol. 2012, 212, 1700. http://dx.doi.org/10.0116/j.jmatprotec.2012.03.019

[11] Slepicka P., Michaljanicová I., Sajdlb P., Fitl P., Švorcík V.: Appl. Surf. Sci. 2013, 283, 438. http://dx.doi.org/10.1016/j.apsusc.2013.06.127

[12] Żenkiewicz M., Rytlewski P., Malinowski R.: J. Achiev. Mater. Manufact. Eng. 2010, 43, 192.

[13] NIST X-ray Photoelectron Spectroscopy Databas.e 20, Version 3.5: http://srdata.nist.gov/xps/

[14] “High resolution XPS of organic polymers. The Scienta ESCA 300 Databas.e” (Ed. Beamson D., Briggs D.), Wiley, Chichester 1992.

Google Scholar

Altmetric indicators

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0