Rubber composites with incorporated magnetic filler

J. Kruželák; R. Dosoudil; R. Sýkora; I. Hudec

doi:10.14314/polimery.2014.819

Published : 2014-12-30

Vol. 59 No. 11-12 (2014)

Rubber composites with incorporated magnetic filler

J. Kruželák R. Dosoudil R. Sýkora I. Hudec

DOI: https://doi.org/10.14314/polimery.2014.819

Abstract

In this study, rubber magnetic composites were prepared by incorporation of strontium ferrite into non-polar and polar rubber matrices. The aim was to investigate the influence of magnetic filler content on the cross-linking and properties of the tested materials. The results demonstrate that the presence of strontium ferrite in rubber matrices leads to a significant increase in the magnetic characteristics of composites. The physical properties of the tested systems seem to be less dependent on magnetic filler content although the improvement of evaluated characteristics with increasing content of ferrite was achieved.

Keywords

rubber magnetic composites ; strontium ferrite ; curing characteristics ; cross-link density ; physical properties of composities ; magnetic properties of composites magnetyczne kompozyty elastomerowe ; ferryt strontu ; charakterystyka sieciowania ; gęstość usieciowania ; właściwości fizyczne kompozytów właściwości magnetyczne kompozytów

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Kruželák, J., Dosoudil, R., Sýkora, R., & Hudec, I. (2014). Rubber composites with incorporated magnetic filler. Polimery, 59(11-12), 819-824. https://doi.org/10.14314/polimery.2014.819

References

Wang Q., Yang F., Yang Q., Chen J., Guan H.: Mater. Design. 2010, 31, 1023.
Crossref

[2] Agarwal K., Prasad M., Sharma R.B., Setua D.K.: Polym. Test. 2011, 30, 155.
Crossref

[3] El-Nashar D.E., Ahmed N.M., Agami W.R.: Mater. Design. 2013, 52, 108.
Crossref

[4] Lagashetty A., Basavaraj S., Bedre M., Venkatarman A.: J. Metall. Mater. Sci. 2009, 51, 305.

[5] Muhammad Abdul Jamal E., Joy P.A., Kurian P., Anatharaman M.R.: Mater. Sci. Eng. B 2009, 156, 24.

[6] Malini K.A., Mohammed E.M., Sindhu S., Kurian P., Anantharaman M.R.: Plast. Rubb. Comp. 2002, 31, 4497.

[7] Bellušová D., Kyselá G., Ürögiová E., Hudec I., Dosoudil R.: J. El. Eng. 2006, 57, 155.

[8] Kazin P. E., Trusov L.A., Zaitsev D. D., Tretyakov Y. D., Jansen M.: J. Magn. Magn. Mater. 2008, 320, 1068.
Crossref

[9] Coey J.M.D.: J. Alloys Compd. 2001, 326, 2.
Crossref

[10] Kraus G.: J. Appl. Polym. Sci. 1963, 7, 861.
Crossref

Google Scholar

Altmetric indicators

Citing articles via

CITEDBY SCOPUS

Statistics

Total abstract views : 56

PDF Downloads : 66

J. Kruželák jan.kruzelak@stuba.sk

Affiliation
Slovak University of Technology, Faculty of Chemical and Food Technology, Institute of Polymer Materials, Department of Plastics and Rubber, Radlinského 9, 812 37 Bratislava, Slovakia

R. Dosoudil

Affiliation
Slovak University of Technology, Faculty of Electrical Engineering and Information Technology, Department of Electromagnetic Theory, Ifkovièova 3, 812 19, Bratislava, Slovakia

R. Sýkora

Affiliation
Slovak University of Technology, Faculty of Chemical and Food Technology, Institute of Polymer Materials, Department of Plastics and Rubber, Radlinského 9, 812 37 Bratislava, Slovakia

I. Hudec

Affiliation
Slovak University of Technology, Faculty of Chemical and Food Technology, Institute of Polymer Materials, Department of Plastics and Rubber, Radlinského 9, 812 37 Bratislava, Slovakia