Methodology of assessment of adhesive composites’ properties

T. Smal

Published : 2013-02-28

Vol. 58 No. 2 (2013)

Methodology of assessment of adhesive composites’ properties

T. Smal

Abstract

The paper presents research proposition of methodology of adhesive composites' properties assessment, which was developed on the basis of numerous own researches and analysis of references. Using the proposed methodology, there were conducted experimental tests of a new Belzona 1831 adhesive composite, which can be applied on the wet and insufficiently cleaned surfaces. It appeared that the tested material exhibits much lower compression strength and creep resistance in connection to field repairs of military equipment, than previously tested adhesive composite of „super metal” group — Belzona 1111. Therefore, it does not seem to be useful with repair that guarantee long lasting effectiveness, but only temporary repairs with relative low level of load of repaired element. In contrast to Belzona 1111, the researched adhesive composite can be applied on the wet surfaces since it showed adhesion to steel wet surfaces.

Keywords

wytrzymałość materiałów ; kompozyty klejowe ; właściwości mechaniczne kompozytów klejowych durability of materials ; adhesive composites ; mechanical properties of adhesive composites

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Smal, T. (2013). Methodology of assessment of adhesive composites’ properties. Polimery, 58(2), 114–120. Retrieved from https://ichp.vot.pl/index.php/p/article/view/717

References

Godzimirski J., Smal T.: Zagadnienia Eksploatacji Maszyn 2000, 35, 4(124), 199.

2. Godzimirski J., Smal T.: Technologia i Automatyzacja Montażu 2000, 3(29), 18.

3. Cypko E., Kowalczyk S., Raczkowski D.: „Repair of military equipment by application of quick-setting adhesives (in Polish)”, Sztab Generalny Wojska Polskiego, Warszawa 1998.

4. Davis M. J.: „The role of materials and processes in defectiva bonded structural repairs”, in Proceedings of 41st International Conference SAMPE, Brea, CA, Anaheim, March 1996, pp. 936—950.

5. F/A-22, Live Fire Repair, Surviac Bulletin 2002, vol. XVIII, issue 2, p. 1 and 4. Available from: www.bahdayton.com/surviac/surviacbulletin.htm [cited 2010-09-11], DSN 785-4840.

6. Smal T.: Przegląd Wojsk Lądowych 2005, 3(561), 41.

7. Smal T., Rośkowicz M.: Kwartalnik Belzona 2009, 4(659), 170.

8. STANAG 2418: Procedures for expedient repair, including battle damage repair, 2009, pp. 1—2.

9. FM 4-30.31 (FM 9-43-2): „Recovery and Battle Damage Assessment and Repair”, Washington 2006, pp. 6—1.

10. TM 9-2350-284-BD: „Battlefield Damage Assessment and Repair for Bradley Fighting Vehicles M2A2", Washington 1992.

11. Baker A. A., Jones R.: „Bonded repair of aircraft structures”, Martinius Nijholf Publishing Boston 1988.

12. Baker A. A.: Compos. Struct. 1999, 47, 431.

13. Bartholomeusz R. A., Baker A. A., Chester R. J., Searl A.: Int. J. Adhes. Adhes. 1999, 19, 173.

14. Chester R. J.,Walker K. F., Chalkley P. D.: Int. J. Adhes. Adhes. 1999, 19, 1.

15. Higgins A.: Int. J. Adhes. Adhes. 2000, 20, 367.

16. Chant M. D.: „Battle damage repair” (in Polish) in Proceedings of Conference „The composite technologies of Belzona in military applications”, Cracow 1994, pp. 2—5.

17. Chasseaud P. T.: Int. J. Adhes. Adhes. 1999, 19, 217.

18. Godzimirski J., Tkaczuk S.: „Research on adhesive materials in the context of aircrafts repairs” (in Polish), Przegląd Sił Powietrznych i Obrony Powietrznej 1997, 5.

19. Paul J. B., Jones R.: Eng. Fract. Mech. 1994, 48(3), 455.

20. Smal T., Rooekowicz M.: „Characteristic of damages and repairs of military aircrafts” (in Polish), Logistyka 2009, 2. CD-Rom.

21. Godzimirski J., Komorek A., Rośkowicz M., Smal T.: „Epoxy adhesives. An application in repairs of machines and equipment” (in Polish), WNT, Warszawa 2010, pp. 8—22.

22. Jackson R.: „Battle Damage Assessment and Repair (BDAR)”, Aircraft Survivability 2000, No.Winter, pp. 25—26,

23. Smal T., Masek R.: Przegl¹d Mech. 2006, 4, 5.

25. Smal T.: „Battle damage repair of military equipment with use of adhesive composites” (in Polish) in „The problems of Armament and Military Equipment Service” (in Polish), Wyższa Szkoła Oficerska Wojsk Lądowych im. Gen. T. Kooeciuszki, Wrocław 2006, pp. 205—210.

26. Baker A. A., Chester R. J.: Int. J. Adhes. Adhes. 1992, 12, 73.

27. Davis M. J.: „Acall minimum standards in design and application technology for bonded structural repairs” in Proceedings of International Conference „Composite Repair of Aircraft Structures”, Vancouver 1995, pp. 4—15.

28. Hart-Smith L. J.: „An engineer’s viewpoint on design and analysis of aircraft structural joints” in Proceedings of International Conference „Aerospace Engineering”, 1995, pp. 226—238.

29. Janecki J., Drabik J.: „Curing conditions of composite adhesive materials and their connection to repair and regeneration technology of machines and equipment” (in Polish), Trybologia 1997, 5—6.

30. Kuczmaszewski J.: „The construction and technological bases of the estimation of metals’ adhesive joint strength” (in Polish), Oficyna Wydawnicza Politechniki Lubelskiej, Lublin 1995.

31. Rooekowicz M., Smal T.: Polimery 2011, 56, 471.

32. Broniewski T., Kapko J., Płaczek W., Thomala J.: „Research methods and estimation of properties of synthetic materials” (in Polish), WNT, Warszawa 2000.

33. Jellinek H. H. G.: „Degradation and Stabilization of Polymers: A series of comprehensive reviews vol. 1”, Elselvier Publishing, Amsterdam 1989.

34. „Aging and stabilization of polymers” (Eds. Nejman M. B.) (in Polish), WNT, Warszawa 1996.

35. Nowak M.: „Influence of atmospheric climate on strength of polymers” (in Polish), Archiwum Nauki o Materiałach, 1993, No. 4.

36. Smal T.: Biuletyn WAT 2005, 5—6(633—634), 121.

37. Chalkley P., Baker A. A.: Int. J. Adhes. Adhes. 1999, 19, 121.

38. Chiu W. K., Koh Y. L., Galea S. C., Rajic N.: Compos. Struct. 2000, 50, 433.

39. Chow W. T., Atluri S.: Am. Inst. Aeronaut. Astronaut. J. 1997, 35(9), 1528.

40. Godzimirski J., Tkaczuk S.: Technologia Automatyzacja Montażu 2004, 3—4, 95.

41. Godzimirski J.: „Short-term strength of structural adhesive joints” (in Polish), WNT, Warszawa 2002, p. 15.

42. Kuczmaszewski J.: „Funamentals of metal-metal adhesive joints design”, Lublin University of Technology Polish Academy of Science, Lublin 2006, pp. 57—58.

43. Kinloch A. J.: „Adhesion and Adhesives: Science and Technology”, Chapman and Hall, London 1987.

44. Godzimirski J., Tkaczuk S.: Przegląd Mech. 2005, 9, 32.

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0