Ternary PC/ABS/PMMA blends — morphology and mechanical properties under quasi-static loading conditions

J. Rybnicek; R. Lach; W. Grellmann; M. Lapcikova; M. Slouf; Z. Krulis; E. Anisimov; J. Hajek

Published : 2012-02-28

Vol. 57 No. 2 (2012)

Ternary PC/ABS/PMMA blends — morphology and mechanical properties under quasi-static loading conditions

J. Rybnicek R. Lach W. Grellmann M. Lapcikova M. Slouf Z. Krulis E. Anisimov J. Hajek

Abstract

PC/ABS/PMMA blends with a varied content of PMMA were studied. TEM microscopy was employed to reveal the individual phases. Uniaxial tensile testing and instrumented macro-hardness indentation were carried out to quantify the hardness, indentation modulus, elastic and plastic deformation work during indentation, yield strain and stress values. The data was correlated with the morphology. In case PMMA is the minor phase, it tends to locate on the PC/SAN interface; whereas in case of being the major one, SAN plays the role of compatibilizer and encapsulates the PC particles. Good compatibility of the blends was confirmed by the results of mechanical testing, which revealed strain-controlled plasticity.

Keywords

kompatybilizator ; morfologia ; trójskładnikowa mieszanina ; poliwęglan ; poli(metakrylan metylu) ; poli(akrylonitryl-butadien-styren) ; poli(styren-co-akrylonitryl) compatibilizer ; morphology ; ternary blend ; polycarbonate ; poly(methyl methacrylate) ; poly(acrylonitrile/butadiene/styrene) ; poly(styrene-co-acrylonitryle)

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Rybnicek, J., Lach, R., Grellmann, W., Lapcikova, M., Slouf, M., Krulis, Z., … Hajek, J. (2012). Ternary PC/ABS/PMMA blends — morphology and mechanical properties under quasi-static loading conditions. Polimery, 57(2), 87–94. Retrieved from https://ichp.vot.pl/index.php/p/article/view/808

References

Jeziorska R., Klepka T., Paukszta D.: Polimery 2007, 52, 294.

2.Jeziorska R: Polimery 2005, 50, 468.

3.Pat WO 2 007 036 171 A1 20 070 405 (2007).

4.Horsch D., Blass R., Pfaff R.: Kunststoffe 1992, 82, 1200.

5.Kim B. K., Yoon L. K., Xie X. M.: J. Appl. Polym. Sci. 1997, 66, 1531.

6.Kim B. K., Choi C. G., Xie X. M.: J. Macromol. Sci. Phys. 1996, B35, 829.

7.Liu X., Bertilson H.: J. Appl. Polym. Sci. 1999, 74, 510.

8.Jin D.W., Shon K.H., Jeong H.M., Kim B.K.: J. Appl. Polym. Sci. 1998, 69, 533.

9.Jin D. W., Shon K. H., Jeong H. M.: Polym. Korea 1996, 20, 775.

10.Choi K. J., Lee G. H., Ahn S. J., Shon K. H., Kim I., Jeong H. M.: J. Appl. Polym. Sci. 1996, 59, 557

11.Yang K. M., Lee S. H., Oh J. M.: Polym. Eng. Sci. 1996, 23, 1667.

12.Debier D., Devaux J., Legras R., Leblanc D.: Polym. Eng. Sci. 1994, 34, 613.

13.Yang K., Lee Y. H., Oh J. M.: Polym. Eng. Sci. 1999, 39, 1667.

14.Wu S.: Polym. Eng. Sci. 1978, 27, 335.

15.Rybnicek J., Lach R., Lapcikova M., Seidl J., Krulis Z., Grellmann W., Slouf M.: J. Appl. Polym. Sci. 2008, 109, 3210.

16.Cheng T. W. Keskkula H., Paul D. R.: Polymer 1992, 33, 1606.

17.Hobbs S. Y., Dekkers M. E. J., Watkins V. H.: Polymer 1988, 29, 1598.

18.Hobbs S. Y., Dekkers M. E. J., Watkins V. H.: Polym. Bull. 1987, 17, 341.

19.Utracki L. A.: „Polymer Alloys and Blends: Thermodynamics and Rheology“, Hanser, Munich Vienna New York 1989.

20.Hobeika S., Men Y., Strobl G.: Macromolecules 2000, 33, 1827.

21.Bubeck R. A., Buckley Jr. D. J., Kramer E. J., Brown H. R.: J. Mater. Sci. 1991, 26, 6249.

22.Flores A., Balta-Calleja F. J., Attenburrow G. E., Bassett D. C.: Polymer 2000, 41, 5431.

23.Bucknall C. B., Ayre D. S., Dijkstra D. J.: Polymer 2000, 41, 5937.

24.Rybnicek J.: “Deformation and Fracture Behavior of Recycled PC, ABS, PMMA blends”, PhD Thesis, Czech Technical University, Prague 2007.

25.Weiler W.: “Härteprüfung an Metallen und Kunststoffen”, 2nd ed., Expert Verlag, Renningen 1990.

26.May M., Fröhlich F., Grau P., Grellmann W.: Plaste Kautschuk 1983, 30, 149.

27.Herrmann K., Kompatschka M., Polzin T., Ullner C., Wehrstedt A.: “Härteprüfung an Metallen und Kunststoffen”, Expert-Verlag, Renningen 2007.

28.Koch T., Seidler S.: Strain 2009, 45, 26.

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

J. Rybnicek polimery@ichp.pl

R. Lach

W. Grellmann

M. Lapcikova

M. Slouf

Z. Krulis

E. Anisimov

J. Hajek