Recycling of automotive lighting — effect of UV cured coating contaminants on polycarbonate toughness

J. Rybnicek

Published : 2011-12-30

Vol. 56 No. 11-12 (2011)

Recycling of automotive lighting — effect of UV cured coating contaminants on polycarbonate toughness

J. Rybnicek

Abstract

This work presents studies on the impact of the coating on reprocessed polycarbonate (PC) in order to evaluate changes in the fracture behavior and toughness of polycarbonate. The comparison of instrumented and non-instrumented impact testing methods is given. The fracture mechanics parameters such as dynamic strain energy release rate (GId), and fracture toughness (KId) where determined. The coating creates non-homogeneously dispersed particles, which act as stress concentrators facilitating multiple crazing and causing embrittlement of the material. The fracture toughness was diminished only slightly and was accompanied with the rise of dynamic yield stress (sd) and dynamic flexural modulus (Ed). The heat deflection temperature (HDT), melt volume flow rate (MVR) and density were affected only marginally in comparison to recycled polycarbonate without coating contaminants.

Keywords

poliwęglan ; przetwarzanie ; powłoka poliuretanowo-akrylowa modyfikowana krzemem ; odporność na kruche pękanie ; dynamiczny współczynnik uwalniania energii polycarbonate ; reprocessing ; silicon-modified polyurethane acrylate coating ; fracture toughness ; dynamic strain energy release rate

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Rybnicek, J. (2011). Recycling of automotive lighting — effect of UV cured coating contaminants on polycarbonate toughness. Polimery, 56(11-12), 849–855. Retrieved from https://ichp.vot.pl/index.php/p/article/view/976

References

Bledzki A. K., Kubiak A.: Polimery 1996, 41, 496.

2. Bledzki A. K.: Kunstoffe Plast Europe 1997, 87, 17.

3. Liu Z. Q., Cunha A. M. J.: Appl. Polym. Sci. 2000, 77, 1393.

4. Abbas K. B.: Polym. Eng. Sci. 1980, 20, 376.

5. Bernardo C. A.: “In Frontiers in the Science and Technology of Polymer Recycling” (Ed. Akovali G.), Kluwer Academic Publishers, 1998, p. 215.

6. Benardo C. A., Cunha A. M., Olifeira M. J.: Polymer Recycling 1996, 2, 237.

7. Mantia F. P.: “In Frontiers in the Science and Technology of Polymer Recycling” (Ed. Akovali G.), Kluwer Academic Publishers, 1998, p. 249.

8. Equiazábal J. I., Nazábal J.: Polym. Eng. Sci. 1990, 30, 527.

9. Shea J. W., Aloisio C., Cammons R. R.: in “Proceedings of Annual Technical Conference (ANTEC)”, 1975, p. 614.

10. Shea J.W., Nelson E. D., Cammons R. R.: in “Proceedings of Annual Technical Conference (ANTEC)”, 1977, p. 326.

11. Bledzki A. K., Orth P., Tappe P.: Polimery 1999, 44, 413.

12. Bledzki A. K., Orth P., Tappe P.: Polimery 1999, 44, 275.

13. Platti E., Williams J. G.: Polym. Eng. Sci. 1975, 15, 470.

14. Barkley D., Akay M.: Polym. Test. 1992, No. 11, 249.

15. Grellmann W., Seidler S.: “Deformation and Fracture Behaviour of Polymers”, Springer Verlag, Berlin Heidelberg 2001.

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0