Preparation and characterization of epoxy resins filled with submicron spherical zirconia particles

F. Bondioli; V. Cannillo; E. Fabbri; M. Messori

Published : 2022-08-30

Vol. 51 No. 11-12 (2006)

Preparation and characterization of epoxy resins filled with submicron spherical zirconia particles

F. Bondioli V. Cannillo E. Fabbri M. Messori

Abstract

Submicron spherical zirconia particles were synthesized and used as a reinforcement for epoxy resins. In fact, recent developments indicate that a significant improvement in the thermoset polymer performance may be obtained by using submicron inorganic filler. In this paper, different composites with weight fraction of the filler in the range 1-5 % were prepared and characterized in terms of mechanical properties. A numerical model suitable for the description of such materials was set up and employed to estimate the properties as functions of the reinforcement content.

Keywords

żywice epoksydowe ; submikroskopowe sferyczne cząstki ditlenku cyrkonu ; nanokompozyty ; moduł sprężystości wzdłużnej ; modelowanie epoxy resins ; submicron spherical zirconia particles ; nanocomposites ; elastic modulus ; modelling

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Bondioli, F., Cannillo, V., Fabbri, E., & Messori, M. (2022). Preparation and characterization of epoxy resins filled with submicron spherical zirconia particles. Polimery, 51(11-12), 794–798. Retrieved from https://ichp.vot.pl/index.php/p/article/view/1581

References

Barbero E. J.: "Introduction to Composite Materials design", Taylor & Francis, New York 1999.

2. May C. A.: "Epoxy Resins — Chemistry and Technology", 2nd ed., Marcel Dekker, York 1988.

3. Ellis B.: "Chemistry and Technology of Epoxy Resins", Blackie, London 1993.

4. Zhang Z., Breidt C., Chang L., Haupert F, Friedrich K.: Composites Part A 2004,35,1385.

5. Wetzel B., Haupert F, Zhang M. Q.: Compos. Sci. Technol 2003, 63,2055.

6. Mulhaupt R., Engelhardt T, Schall N.: Plaste Europe 2001, 61, No 10, 63.

7. Singh R. R, Zhang M., Chan D. J.: Mater. Sci 2002,37, 781.

8. Wetzel B., Haupert F, Friedrich K., Zhang M. Q., Rong M. Z.: Proceedings of the 13th ECCM Conference, Brugge, Belgium 2001.

9. Wetzel B., Haupert F, Friedrich K., Zhang M. Q., Rong M. Z.: Polymer. Eng. Sci. 2002, 42,1919.

10. Rong M. Z., Zhang M. Q., Liu H., Zeng H. M.: Ind. Lubric. Tribol 2001, 53, No 2, 72.

11. Visconti I. C., Langella A., Durante M.: Appl. Comp. Mater. 2001,8,179.

12. Xing X. S., Li R. K.: Wear 2004, 256,21.

13. Kang S., Hong S., Choe C/R., Park M., Rim S., Kim J.: Polymer Sci. 2001,42, 879.

14. Ng C. B., Schadler L. S., Siegel R. W.: Nanostruct. Mater. 1999,12, 507.

15. Van Blaaderen A., Van Geest J., Vrij A.: J. Coll. Interface Sci. 1992,154,481.

16. Carter W. C., Langer S. A., Fuller E. R.: "The OOF manual: version 1.0", 1998.

17. Langer S. A., Fuller E. R., Carter W. C: Comput. Sci Eng. 2001,3,15.

18. Tan C., Bowen B., Epstein N.: J. Coll. Interface Sci. 1987,118,290.

19. Lerot L., Legrand F., De Brucker P. J.: Mater. Sci 1991, 26,2353.

20. Winkler J., Klinke E., Sathyanarayana M. N., Dulog L.: J. Coating Technol. 1987,45,59.

21. Schmidt D., Shah D., Giannelis E. P: Curr. Opin. Solid State Mater. Sci 2002, 6, 205.

22. Lewis T B., Nielsen L. E.: J. Appl Polym. Sci 1970,14, 1449.

23. Avella M., Bondioli F, Cannillo V., Errico M. E., Ferrari A. M., Focher B., Malinconico M., Manfredini T, Montorsi M.: Mat. Sci. Tech. 2004,20,1340.

24. Zhong Y, Wang J., Wu Y. M., Huang Z. P: Comp. Sci. Tech. 2004, 64,1353.

25. Yang F., Pitchumani R.: Comp. Sci. Tech. 2004, 64, 1437.

26. Tsui C. P, Tang C. Y, Lee T. C.: J. Mat. Proc. Tech. 2002, 117,105.

27. Liu Y. J., Chen X. L.: Mech. Mater. 2003, 35, 69.

28. Wang H., Bai Y, Liu S., Wu J., Wong C. P: Acta Mater. 2002, 50, 4369.

29. Gao S. L., Mader E.: Comp. Part A 2002, 33, 559.

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0

F. Bondioli

V. Cannillo

E. Fabbri

M. Messori messori.massimo@unimore.it

Affiliation
Universita di Modena e Reggio Emilia, Dipartimento di Ingegneria dei Materiali e dell'Ambiente, Via Vignolose 905/A, 41100 Modena, Italy