Study of cellular structures built from self-similar models and repeatable structures manufactured by FDM/FFF technology

Mateusz Rudnik

doi:10.14314/polimery.2024.3.4

Published : 2024-04-17

Vol. 69 No. 3 (2024)

Study of cellular structures built from self-similar models and repeatable structures manufactured by FDM/FFF technology

Mateusz Rudnik

DOI: https://doi.org/10.14314/polimery.2024.3.4

Abstract

Appropriate recursive formulas were obtained for generating repeatable and self-similar cellular structures obtained from PLA using the FDM/FFF method. The H_1s, H_2s self-similar models show mechanical self-similarity relationships based on simulation and compression test. In addition, the H_1s models show higher displacement values than the H_1i recurrent models. For the results of the H_2s models, it is not conclusive whether they show higher displacement values.

Keywords

PLA ; FDM ; Cell Structures ; Compression

Similar Articles

Intan Najwa Humaira Mohamed Haneef, Yose Fachmi Buys, Norhashimah Mohd Shaffiar, Sharifah Imihezri Syed Shaharuddin, Abdul Malek Abdul Hamid, Mohd Faizul Mohd Sabri, Amalina Muhammad Afifi, Effect of HNT on mechanical and thermal properties of poly(lactic acid)/polypropylene carbonate blends , Polimery: Vol. 66 No. 9 (2021)
A. Gałęski, E. Piórkowska, M. Pluta, Z. Kuliński, R. Masirek, Modification of physical properties of polylactide , Polimery: Vol. 50 No. 7-8 (2005)
Anandha Moorthy Appusamy, Sivakumar Karuppan , Madheswaran Subramaniyan, Balaji Ayyanar Chinnappan, The influence of filler and FDM printing parameters on the strength of PLA , Polimery: Vol. 69 No. 2 (2024)
A. Jaszkiewicz, A. K. Bledzki, P. Franciszczak, Improving the mechanical performance of PLA composites with natural, man-made cellulose and glass fibers — a comparison to PP counterparts , Polimery: Vol. 58 No. 6 (2013)
M. Rom, J. Fabia, K. Grübel, E. Sarna, T. Graczyk, J. Janicki, Study of the biodegradability of polylactide fibers in wastewater treatment processes , Polimery: Vol. 62 No. 11-12 (2017)
M. Żenkiewicz, J. Richert, A. Różański, Effects of blow molding ratio on mechanical properties of polylactide nanocomposite films , Polimery: Vol. 55 No. 11-12 (2010)
K. Moraczewski, R. Malinowski, P. Rytlewski, M. Żenkiewicz, Autocatalytic metallization of polylactide , Polimery: Vol. 60 No. 7-8 (2015)
Natalia Kowalska, Paweł Szczygieł, Michał Skrzyniarz, Sławomir Błasiak, Effect of shells number and machining on selected properties of 3D-printed PLA samples , Polimery: Vol. 69 No. 3 (2024)
Madheswaran Subramaniyan, Sivakumar Karuppan, Mechanical properties of sandwich products obtained by 3D printing from PLA-PLA/Al2O3 , Polimery: Vol. 68 No. 11-12 (2023)
R. Jeziórska, A. Szadkowska, B. Świerz-Motysia, J. Kozakiewicz, Effect of "core-shell” polymeric nanofiller on the structure and properties of polylactide and thermoplastic corn starch blend , Polimery: Vol. 57 No. 5 (2012)

1 2 3 4 5 6 7 8 9 10 > >>

You may also start an advanced similarity search for this article.

Details

References

Statistics

Authors

Download files

pdf

Zasady cytowania

Rudnik, M. (2024). Study of cellular structures built from self-similar models and repeatable structures manufactured by FDM/FFF technology. Polimery, 69(3), 173–178. https://doi.org/10.14314/polimery.2024.3.4

Licence

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

References

Szot, W. Rheological Analysis of 3D Printed Elements of Acrylonitrile Butadiene and Styrene Material Using Multiparameter Ideal Body Models. 3D Printing and Additive Manufacturing 2023, doi:10.1089/3dp.2022.0298.
Google Scholar

Kozior, T.; Kundera, C. Rheological properties of cellular structures manufactured by additive PJM technology. Tehnicki Vjesnik 2021, doi:10.17559/TV-20191007145545.
Google Scholar

Bochnia, J.; Blasiak, M.; Kozior, T. Tensile strength analysis of thin-walled polymer glass fiber reinforced samples manufactured by 3d printing technology. Polymers 2020, 12, 2783, doi:10.3390/polym12122783.
Google Scholar

Vodilka, A.; Koroľ, M.; Kočiško, M.; Zajac, J. Adjusting Surface Models of Cellular Structures for Making Physical Models Using FDM Technology. Polymers 2023, 15, 1198, doi:10.3390/polym15051198.
Google Scholar

Ghazlan, A.; Nguyen, T.; Ngo, T.; Linforth, S.; Le, V.T. Performance of a 3D printed cellular structure inspired by bone. Thin-Walled Structures 2020, 151, 106713, doi:10.1016/j.tws.2020.106713.
Google Scholar

Zhang, X.; Yu, X.; Chen, J.; Zhao, C.; Guan, S.; Fu, Y. Influence Mechanism of the Trabecular and Chamfer Radii on the Three-point Bending Properties of Trabecular Beetle Elytron Plates. Journal of Bionic Engineering 2021, doi:10.1007/s42235-021-0025-z.
Google Scholar

Forés-Garriga, A.; Gómez-Gras, G.; Pérez, M.A. Additively manufactured three-dimensional lightweight cellular solids: Experimental and numerical analysis. Materials & Design 2023, 226, 111641, doi:10.1016/j.matdes.2023.111641.
Google Scholar

Gaur, A.; Chawla, K.; Kiran, R.; Patel, S. Effective thermo-electro-mechanical properties of Menger sponge-like fractal structures: a finite element study. Physica Scripta 2023, 98, 095104, doi:10.1088/1402-4896/ace5f1.
Google Scholar

Płatek, P.; Rajkowski, K.; Cieplak, K.; Sarzyński, M.; Małachowski, J.; Woźniak, R.; Janiszewski, J. Deformation Process of 3D Printed Structures Made from Flexible Material with Different Values of Relative Density. Polymers 2020, 12, 2120, doi:10.3390/polym12092120.
Google Scholar

Mazurkiewicz, M.; Kluczyński, J.; Jasik, K.; Sarzyński, B.; Szachogłuchowicz, I.; Łuszczek, J.; Torzewski, J.; Śnieżek, L.; Grzelak, K.; Małek, M. Bending Strength of Polyamide-Based Composites Obtained during the Fused Filament Fabrication (FFF) Process. Materials 2022, 15, 5079, doi:10.3390/ma15145079.
Google Scholar

Ullah, A.S.; D’Addona, D.M.; Seto, Y.; Yonehara, S.; Kubo, A. Utilizing Fractals for Modeling and 3D Printing of Porous Structures. Fractal and Fractional 2021, 5, 40, doi:10.3390/fractalfract5020040.
Google Scholar

Haftendorn, D. Fraktale, Chaos, Ordnung. In Mathematik sehen und verstehen; Spektrum Akademischer Verlag: Heidelberg, 2010; pp. 79–116.
Google Scholar

Technical Data Sheet PLA Available online: https://www.google.pl/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwiKvPS0i4iAAxXgVaQEHbW4DM8QFnoECCYQAQ&url=https%3A%2F%2Fwww.matterhackers.com%2Fr%2F9EBLeA&usg=AOvVaw3AQLWiVDQN6E0md5-VEix7&opi=89978449.
Google Scholar

Li, D.; Luo, C.; Zhou, J.; Dong, L.; Chen, Y.; Liu, G.; Qiao, S. The Role of the Interface of PLA with Thermoplastic Starch in the Nonisothermal Crystallization Behavior of PLA in PLA/Thermoplastic Starch/SiO2 Composites. Polymers 2023, 15, 1579, doi:10.3390/polym15061579.
Google Scholar

Ayrilmis, N.; Nagarajan, R.; Kuzman, M.K. Effects of the Face/Core Layer Ratio on the Mechanical Properties of 3D Printed Wood/Polylactic Acid (PLA) Green Biocomposite Panels with a Gyroid Core. Polymers 2020, 12, 2929, doi:10.3390/polym12122929.
Google Scholar

Shimadzu AGX-V;
Google Scholar

ISO 604 Plastics — Determination of compressive properties.
Google Scholar