Effects of blow molding ratio on mechanical properties of polylactide nanocomposite films

M. Żenkiewicz; J. Richert; A. Różański

Published : 2010-12-30

Vol. 55 No. 11-12 (2010)

Effects of blow molding ratio on mechanical properties of polylactide nanocomposite films

M. Żenkiewicz J. Richert A. Różański

Abstract

The results of the investigations of the effect of blow-up ratio of nanocomposite poly(lactic acid) (PLA) films on the mechanical properties determined under static tension are discussed. Investigated films contain additives in the form of a montmorillonite (MMT) nanofiller (LC sample) or MMT and poly(methyl methacrylate) (PMMA) as a modifier (LCM sample) or MMT and poly(ethylene glycol) (PEG) as a plasticizer (LCG sample). Using the X-ray diffraction (XRD) method, it was found that the screw shape of the co-rotating twin-screw extruder, applied to prepare a granulated nanocomposite, significantly influenced the dispersion of MMT within the PLA matrix. The PLA film containing the additives and subjected to a proper extrusion blow molding have better mechanical properties as compared to those of a neat PLA (L sample) film. These properties were found to be the best when the blow-up ratio (R) of the nanocomposite films was equal to 4. The images obtained by means of the transmission electron microscopy (TEM) confirmed that ordering of the MMT platelets within the PLA matrix occurred during the film blowing, which induced an improvement in the film mechanical properties. The presented results prove usefulness of the extrusion blow molding as a method of manufacturing nanocomposite films based on the PLA matrix.

Keywords

polilaktyd ; nanokompozyty ; montmorillonit ; folia rozdmuchiwana ; właściwości mechaniczne poly(lactic acid) ; nanocomposites ; montmorillonite ; blown film ; mechanical properties

Details

References

Statistics

Authors

Download files

PDF

Zasady cytowania

Żenkiewicz, M., Richert, J., & Różański, A. (2010). Effects of blow molding ratio on mechanical properties of polylactide nanocomposite films. Polimery, 55(11-12), 869–876. Retrieved from https://ichp.vot.pl/index.php/p/article/view/1077

References

Khademhosseini A., LangnerR.: Chem. Eng. Progr. 2006, 102, 38.

2. „Functional Materials” (Eds. Geckeler K. E., Rosenberg E.), American Scientific Publishers, Stevenson Ranch 2006.

3. Feng S.-S., Mei L., Anitha P., Can C. W., Zhou W.: Biomaterials 2009, 30, 3297.

4. „Polymer nanocomposites” (Eds. Mai Y. W., Yu Z. Z.), Woodhead Publishing Limited, Cambridge 2006.

5. Bordes P., Pollet E., Averous L.: Prog. Polym. Sci. 2009, 34, 125.

6. Choudalakis G., Gotsis A. D.: Eur. Polym. J. 2009, 45, 967.

7. de Azeredo H. M. C.: Food Res. M. 2009, 42, 1240.

8. Van de Velde K., Kiekens P.: Polym. Test. 2002, 21, 433.

9. Gupta A. P., Kumar V.: Polym. Sci. 2007, 43, 4053.

10. Garlotta D.: J. Polym. Envir. 2001, 9, 63.

11. Piorkowska E., Kuliński Z., Gadzinowska K.: Polimery 2009, 54, 83.

12. Oyama H. T.: Polymer 2009, 50, 747.

13. Lim L.-T., Auras R., Rubino M.: Prog. Polym. Sci. 2008, 33, 820.

14. Żenkiewicz M., Richert J.: Polym. Test. 2009, 28, 412.

15. Godshall D., Wilkes D., Krishnaswamy R. K., Sukhadia A. M.: Polymer 2003, 44, 5397.

16. Miinstedt H., Steffi T., Malmberg A.: Rheol. Acta 2005, 45, 14.

17. Min K. D., Kim M. Y, Choi K.-Y, Heung J., Lee S.-G.: Polym. J. Bull. 2006, 57, 101.

18. Gołębiewski J., Różański A., Dzwonkowski J., Gałęski A.; Eur. Polym. J. 2008, 44, 270.

19. Lotti C., Isaac C. S., Branciforti M. C., Alves R. M. V., Liberman S., Bretas R. E. S.: Eur. Polym.J. 2008, 44,1346.

20. Mirzadeh A., Kokabi M.: Eur. Polym. J. 2007, 43, 3757.

21. Cole K. C., Perrin Sarazin F., Dorval Douville G.: Macromol. Symp. 2005, 230, 1.

22. Thellen C., Orroth C., Froio D., Ziegler D., Lucciarini J, Farrell R., D’Souza N. A., Ratto J. A.: Polymer 2005, 46, 11716

23. Fujimori A., Ninomiya N., Masuko T.: Polym. Adv. Technol. 2008, 19, 1735.

24. Richert J., Żenkiewicz M.: „The effect of the shape of the screws of the extruder on permeability of polylactide composites for water vapour, oxygen and carbon dioxide” in: „Polymers and Constructional Composites” (Ed. Wróbel G.), Logos Press, Cieszyn 2009, pp. 86-96.

25. Twin screw extruder BTSK 20/40D. Operating instruction, Bühler GmbH, Braunschweig 2004.

26. Bourbigot S., Fontaine G., Bellayer S., Delobel R.: Polym. Test. 2008, 27, 2.

27. Borse N. K., Kamal M. R.: Polym. Eng. Sci. 2009, 49, 641.

28. Ellis T. S.: Polymer 2003, 44, 6443.

29. Wu T., Xie T., Yang G.: Appl. Clay Sci. 2009, 45, 105.

Google Scholar

Citing articles via

Statistics

Total abstract views : 0

PDF Downloads : 0