Register Login ##{$loggedInUsername}##
 
  Język Polski   English
baner

Advanced filters
 

Search Results

Effects of zone heating on pet fibers structures and dynamics of melt spinning process. Part II, Mathematical model
A. Blim    L. Jarecki   
686-700
2022-08-26

A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers. Part I
Paweł Wawrzyniak    Waldemar Karaszewski   
346-356
2020-12-15

Effects of zone heating on pet fibers structures and dynamics of melt spinning process. Part I. Crystallinity and molecular orientation
A. Blim    E. Ołdak    A. Wasiak    L. Jarecki   
48-59
2022-09-01

A new method of curing epoxy resin by using bis(heptaphenylaluminosilsesquioxane) as a hardener
D. Chmielewska    M. Barczewski    T. Sterzyński   
270-275
2013-04-30

Rheometric studies on the process of polyethylene or its copolymers' crosslinking in the presence of peroxides. Part III. Effects of the concentration and type of peroxide on the process rate
M. Uhniat    S. Kudła    M. Zemlak    W. Balcerowiak   
180-186
2022-09-01

The universal temperature parameter of rigid PVC gelation in Brabender kneader
K. Piszczek    J. Tomaszewska    T. Sterzyński   
646-648
2022-09-01

Thermal degradation behavior of cellulose-based material for gating systems in iron casting production
B. Grabowska    M. Szucki    J. S. Suchy    S. Eichholz    K. Hodor   
39-44
2013-01-30

Solid-state polycondensation (SSP) as a method to obtain high molecular weight polymers. Part I. Parameters influencing the SSP process
I. Steinborn-Rogulska    G. Rokicki   
3-13
2013-01-30

Thermal and mechanical properties of poly(L-lactic acid) nucleated with N,N’-bis(phenyl) 1,4-naphthalenedicarboxylic acid dihydrazide
Li-Sha Zhao    Jun Qiao    Wei Chen    Yan-hua Cai   
234-244
2021-05-07

Reversible endothermic process observed by dsc in thermoplastic multiblock elastomers at middle temperature range
R. Ukielski    A. Kozłowska   
809-815
2022-09-17

Pickering emulsion polymerization of styrene towards alfa-functionalized polystyrene latex: parameters and process conditions
Dariusz Tercki    Beata Orlińska    Dominika Słotwińska    Marcin Sajdak   
206-214
2023-06-15

A literature survey of the influence of preform reheating and stretch blow molding with hot mold process parameters on the properties of PET containers Part II
Paweł Wawrzyniak    Waldemar Karaszewski   
437-448
2020-12-16

Modulated temperature DSC studies on the phase transitions of poly(ethylene oxide). Effect of temperature step
K. Pielichowski    K. Flejtuch   
455-457
2022-09-17

Poly(vinyl chloride) gelation in rolling process
K. Piszczek   
441-448
2022-09-01

On-line temperature recording in a multi cooling channel injection molding tool
P. Postawa    T. Stachowiak    D. Grzesiczak   
351-355
2015-05-30

Epoxy compositions and materials cured with complexes of imidazoles and Cu(II) cations
R. Pilawka    T. Spychaj    A. Leistner    M. El Fray   
526-530
2022-08-23

Gelation of suspension PVC with small amount of plasticizer compounds
K. Piszczek   
765-768
2022-09-01

Thermal performances and optical property of poly(L-lactic acid) under the influence of N,N’-dodecanedioic bis(3-phenylpropionic acid) dihydrazide as a crystallization promoter
Xiao-Yu Yang    Li-Sha Zhao    Yan-Hua Cai    Jie Zhao    Lin Wang    Xiao-Li Ma   
523-532
2020-12-16

Effect of the specimen volume of chemosetting polyester resin on the curing process
M. Kozioł    P. Mocek    P. Jankowski   
133-141
2021-01-24

The effect of printing velocity on the temperature and viscosity of the polymer thread at the nozzle exit in 3D printers
Alberto Baeza-Campuzano    Victor M. Castaño   
127-138
2021-02-17

Thermal properties and processability of modified poly(L-lactide): the role of phenylacetic acid hydrazide derivative
Hao Huang    Yanhua Cai    Lisha Zhao   
423-432
2022-09-20

Study on physical aging of amorphous polylactide by differential scanning calorimetry
Agata Drogoń    Marek Pyda   
127-134
2021-01-12

The effect of mold temperature and injection velocity on selected properties of polyethylene moldings
E. Bociąga   
830-836
2022-09-21

Complex study on chitosan degradability
M. Mucha    A. Pawlak   
509-516
2022-09-18

Thermal analysis of a sodium salt of the maleic acid-acrylic acid copolymer used as a polymeric binder
B. Grabowska    M. Holtzer    M. Eichholz    K. Hodor    A. Bobrowski   
151-155
2011-02-28

Crystallization and melting behavior of poly(L-lactic acid) modified with salicyloyl hydrazide derivative
Y.-H. Cai    L. Tian    Y. Tang   
734-742
2021-01-15

Influence of FFF process parameters and macrostructure homogeneity on PLA impact strength
Michał Bączkowski    Dawid Marciniak    Marek Bieliński   
480-483
2021-09-15

The effect of N,N’-bis(benzoyl)dodecanedihydrazide on enhancing the crystallization rate of poly(L-lactic acid)
Y.-H. Cai    L.-S. Zhao   
815-820
2021-01-13

Environmental fracture of polypropylene membranes used in membrane distillation process
M. El Fray    M. Gryta   
865-870
2022-08-23

Automated control of the preform reheating process in the manufacturing of poly(ethylene terephthalate) containers. Part II. Identification of the dynamical properties of controlled object
P. Stączek    S. Płaska   
121-126
2013-02-28

Crystallization kinetics of polycaprolactone in nanocomposites
M. Mucha    M. Tylman    J. Mucha   
686-692
2015-12-30

Evaluation of cracking conditions for butt-welded joints of polyethylene pipes
W. Baranowski    K. Werner    M. Kula   
747-753
2014-10-30

Polyamide 6 modified with silsesquioxane prepared via anionic polymerization of e-caprolactam
K. Kelar    K. Mencel    T. Sterzyński    M. Dutkiewicz    H. Maciejewski   
697-704
2012-10-30

The use of modified silica to control the morphology of polyamide 11 and poly(phenylene oxide) blends
Regina Jeziórska    Agnieszka Szadkowska    Maciej Studziński    Magdalena Żubrowska   
399-410
2021-08-24

Thermo-catalytic degradation of low density polyethylene over clinoptilolite - the effect of carbon residue deposition
K. Tomaszewska    J. Kałużna-Czaplińska    W. Jóźwiak   
222-226
2010-03-30

Molecular parameters of bacterial cellulose. Effect of temperature and pH biosynthesis medium
G. Strobin    A. Włochowicz    D. Ciechańska    S. Boryniec    H. Struszczyk    S. Sobczak   
779-783
2022-09-17

The influence of temperature of poly(vinyl chloride) melt on the equilibrium state of gelation process
K. Piszczek    J. Tomaszewska    T. Sterzyński   
106-110
2020-02-28

Effect of processing parameters on water penetration in water assisted injection molding of ABS
A. Z. Ahmadzai    A. H. Behravesh   
232-239
2011-03-30

An experimental investigation on water penetration in the process of water assisted injection molding of polypropylene
A. Z. Ahmadzai    A. H. B. Vesh   
564-572
2022-08-18

Study on the solid-state shear pulverization process in single screw extruder illustrated by polyethylene as an example
T. Rusiecki    R. Steller   
202-207
2022-09-01

Thermal analysis of swollen sulfur vulcanizates of butadiene-acrylonitrile rubber
G. Janowska    L. Ślusarski    P. Rybiński   
196-200
2022-09-01

Changes in thermal properties of isotactic polypropylene with different additives during aging process (in English)
A. Brzozowska-Stanuch    S. Rabiej    J. Fabia    J. Nowak   
302-307
2014-04-30

A new extrusion head with integrated ultrasonic device and online process parameters measurements system — design and testing
M. Muniesa    Á. Fernández    I. Clavería    C. Javierre    J. A. Sarasua    M. Blanco   
209-216
2015-03-30

Characterization of the crosslinking process of silicone pressure-sensitive adhesives
Z. Czech    K. Gorący   
762-764
2022-09-01

Possibility of epoxy resins application in the tanning process
K. Śmiechowski    J. Żarłok    J. Skiba    E. Wardzińska    P. Penczek   
466-472
2022-08-18

The effect of nanosilica filler on the foaming process and properties of flexible polyurethane foams obtained with rapeseed oil-based polyol
E. Malewska    A. Prociak   
472-479
2015-08-30

Efficiency of the extrusion process and characteristics of a conical-circular die
J. W. Sikora    T. Kapuśniak   
748-754
2022-09-01

Changes of crystalline structure of poly(ethylene terephthalate) fibers in flame retardant finishing process
J. Fabia    A. Gawłowski    T. Graczyk    C. Ślusarczyk   
557-561
2014-08-30

Reometryczne badania procesu sieciowania polietylenu i kopolimerów etylenu wobec nadtlenków. cz. i. opracowanie metodyki badań
M. Uhniat    M. Zemlak    J. John    R. Szulc   
709-713
2022-09-17

Influence of constructional features of the twin-screw plasticizing system on the characteristic of extrusion process
J. Stasiek   
443-454
2022-09-17

Modeling of twin-screw extrusion. Part 1, A model of counter-rotating extrusion
K. Wilczyński    J. L. White   
754-759
2022-08-24

Enzymatic and hydrolytic degradation of poly(e-caprolactone) in natural environment
K. Krasowska    A. Hejmowska    M. Rutkowska   
21-26
2022-08-30

Polyamide 6 modified with fullerenes, prepared via anionic polymerization of e-caprolactam
K. Kelar   
415-424
2022-08-30

Polyoxazolines — mechanism of synthesis and solution properties
A. Dworak    B. Trzebicka    A. Kowalczuk    Ch. Tsvetanov    S. Rangelov   
88-94
2014-01-30

Scaling up of starve fed single screw extrusion

Andrzej Nastaj   
472-479
2021-09-21

Experimental techniques in optimization of the process of injection molding of thermoplastics - After-shrinkage of moldings
M. Bogucki    S. Płaska    P. Stączek   
714-719
2022-09-17

Computer modeling of melt spinning from a crystallizing polymer. Part I. The mathematical model
L. Jarecki   
335-343
2022-09-19

Fabrication of polymer microcomponents using CO2 laser melting technique
W. S. Tan    J. Z. Zhou    S. Huang    W. L. Zhu    X. K. Meng   
192-198
2015-03-30

The influence of temperature and the kind of the atmosphere on polystyrene thermal degradation
M. Krauze    J. Trzeszczynski    M. Dzięcioł   
701-708
2022-09-17

Relaxation processes in poly(butylene teraphthlate) studied by the spin probe spectroscopy
F. Lembicz    F. Ukielski   
296-299
2022-09-17

Thermal properties of crosslinked blends chlorosulfonated polyethylene and styrene-butadiene rubber
G. Janowska    A. Kucharska    J. Kawałek    W. M. Rzymski   
648-653
2022-08-18

Fatigue life of Epidian 57 plastic
J. Godzimirski    A. Komorek    M. Rośkowicz   
737-742
2022-08-24

Changes in structure of dibutyrylchitin fibres in the process of chitin regeneration
D. Biniaś    A. Włochowicz    S. Boryniec    W. Biniaś   
742-747
2022-09-01

Degradation of naturally occurring polymeric materials in sea water environment
M. Rutkowska    A. Heimowska   
854-864
2022-08-23

Efficiency of thermomechanical reclaiming of ground tire rubber conducted in counter-rotating and co-rotating twin screw extruder
K. Formela    M Cysewska   
231-238
2014-03-30

Pulverization of selected thermoplastic polymer blends
E. Młodzianowska    R. Steller   
317-323
2011-04-30

Właściwości przetwórcze i użytkowe pojemników wytwarzanych w procesie wytłaczania z rozdmuchiwaniem w zmiennych warunkach przetwórstwa - ocena wydajności i jakości procesu
K. Pepliński    M. Bieliński   
448-456
2022-08-18

Investigations of HCl influence on PVC dehydrochlorination (DHC)
K. German    K. Kulesza   
337-342
2022-09-17

Rheometric study on the gelation process of the compositions of interpenetrating polymer networks made of polyurethane and unsaturated polyester
P. Król    J. Wojturska   
365-373
2022-08-30

Computer simulations of cellular injection moulding process
P. Palutkiewicz   
132-143
2015-02-28

Cell-structured polymeric materials
M. Kozłowski    A. Kozłowska    S. Frąckowiak   
726-739
2010-10-30

General model of polymer melting in extrusion process
A. Lewandowski    K. Wilczyński   
444-452
2021-01-13

Application of vacuum casting technology for manufacturing of polymeric gears prototypes
R. Oliwa    M. Oleksy    M. Heneczkowski    G. Budzik    O. Markowska    Ł. Przeszłowski   
36-43
2021-01-15

Influence of the synthesis conditions on the properties of low molecular weight epoxy resin
P. Król    B. Król    E. Dziwiński   
549-556
2022-09-17

Effect of the conditions of thermomechanical reclaiming of ground tire rubber on the properties of reclaimed rubber materials
K. Formela    M. Bogucki    P. Stączek   
57—65
2015-01-30

Advanced organic-inorganic hybrid fillers as functional additives for poly(vinyl chloride)
J. Tomaszewska    Ł. Klapiszewski    K. Skórczewska    T. J. Szalaty    T. Jesionowski   
19-26
2021-01-15

PET/Cloisite®15A composite fibers – studies on the structure and the flame inhibition mechanism
Janusz Fabia    Andrzej Gawłowski    Monika Rom    Czesław Ślusarczyk    Włodzimierz Biniaś    Anna Brzozowska-Stanuch    Michał Puchalski   
622-631
2020-12-16

Composites of commercial unsaturated polyester resins containing nanofillers Nanobent®. Part II. Nanocomposites with domestic nanofillers applied in Vacuum Casting technology
R. Śliwa    M. Oleksy    O. Markowska    G. Budzik    T. Dziubek    M. Zaborniak    J. Czech-Polak    M. Heneczkowski   
16-23
2021-01-24

Mathematical model of friction wear process on the example of polymer composites on the basis of phenol-formaldehyde resins
A.O. Tretyakov   
264-267
2022-09-01

Increased molecular weight epoxy resins - syntheses and thermal characteristics
J. Górczyk    D. Bogdał    J. Pielichowski    C. Penczek   
781-786
2022-08-30

Selected properties of recycled polypropylene obtained from porous injection molded parts
D. Sykutera    M. Bieliński   
602-605
2014-08-30

Layered double hydroxides as transesterificationcatalysts and nanofillers for polyester resin
M. Kędzierski    Z. Bończa-Tomaszewski    G. Jaworska    A. Niska   
160-166
2015-03-30

The kinetic modeling of consecutive reactions in the controlled process of step-growth polyaddition of diisocyanates to polyols
P. Król    B. Pilch-Pitera   
77-84
2022-09-18

Effects of chemical and supermolecular structures on mechanical properties of polyurethane/unsaturated polyester compositions of interpenetrating polymer networks types
P. Król    J. Wojturska   
790-800
2022-09-01

Progress in the development of acrylic resin-based powder coatings – an overview

Katarzyna Pojnar    Barbara Pilch-Pitera    Renuka Patil   
143-158
2024-03-20

Studies on ethyl ene/1-hexene copolymerization over the zirconocene catalyst supported on MAO-modified MgCl2(THF)(2)
M. Białek    A. Utrata    K. Czaja   
59-63
2022-09-18

Modification of polyamide 6 fibers with water-glass in the bath method
A. Gawłowski    J. Fabia    C. Ślusarczyk    A. Brzozowska-Stanuch    T. Graczyk    J. Janicki   
861-867
2021-01-15

Study on the solid-state shear pulverization in shear flow conditions
T. Rusiecki    R. Steller   
755-761
2022-09-01

Structure, thermal characterization and mechanical properties of poly(pheny­lene oxide) and high impact polystyrene blend
R. Jeziórska    Z. Wielgosz    A. Szadkowska    M. Studziński    R. Komornicki    J. Stasiński    A. Kania-Szarek   
710-718
2021-01-24

Characteristics of injection molded parts with the areas of weld lines
Elżbieta Bociąga    Władysław Skoneczny   
337-345
2020-12-15

Study on crystallization of polymers during the injection molding
B. Kowalska   
83-87
2022-08-26

The influence of blowing extrusion process of PA film on its structure and physical properties
J. Stasiek    E. Piórkowska    A. Gałęski   
194-203
2022-09-17

Inhibitors of thermally induced burn incidents – the examinations of the flammability, TGA, SAXS and SEM methods
A. Pielesz    A. Gawłowski    J. Fabia    C. Ślusarczyk    E. Sarna   
806-811
2021-01-15

Synthesis, thermal and performance properties of poly(urethane-dimethylsiloxane) anionomers. Part II. Thermal and performance properties
Ł. Byczyński    P. Król   
263-269
2013-04-30

Modeling of starve-fed single-screw extrusion of thermoplastic polyblends
K. J. Wilczyński    A. Nastaj   
199-208
2015-03-30

Some comments on the melting and recrystallization of polyoxymethylene by high-speed and StepScan differential scanning calorimetry
K. Pielichowski    K. Flejtuch   
558-560
2022-09-01

Extrusion process as an automatic control object
B. Broel-Plater    J.W. Sikora   
114-122
2022-09-01

Synthesis of 1,4-cyclohexanedimethanol by hydrogenation of dimethyl terephthalate and its application as a substrate in syntheses of polyesters
G. Lewandowski    A. Wróblewska    E. Milchert   
39-43
2022-08-26

Influence of cathodic dip painting on the mechanical strength of material-adapted composite/metal joints
C. Gerstenberger    T. Osiecki    T. Timmel    L. Kroll   
750-754
2021-01-13

Corona discharge in an air as a method of modification of polymeric materials' surface layers
M. Żenkiewicz   
3-13
2022-08-23

Experimental study on energy consumption in the plasticizing unit of the injection molding machine
J. Iwko    R. Wroblewski    R. Steller   
362-371
2021-01-13

Synthesis and properties of carboxy derivative of Epidian 6 monomethacrylate
M. Bratychak    O. Iatsyshyn    P. Bruzdziak    J. Namiesnik    O. Shyshchak   
766-772
2021-01-24

Application of microwave radiation for crosslinking of sodium polyacrylate/silica gel system used as a binder in foundry sands
B. Grabowska    M. Holtzer   
841-847
2022-08-26

Influence of synthesis conditions on molecular weight as well as mechanical and thermal properties of poly(hexamethylene 2,5-furanate)
Sandra Paszkiewicz    Izabela Irska    Konrad Walkowiak     Agata Zubkiewicz    
527-531
2021-10-28

Effect of urea, sodium nitrate and ethylene glycol addition on the rheological properties of corn starch pastes
A. Makowska    P. Kubiak    W. Białas    G. Lewandowicz   
343-350
2015-05-30

The influence of blowing agents type on foaming process and properties of rigid polyurethane foams
M. Kurańska    A. Prociak    S. Michałowski    A. Zawadzińska   
672-678
2021-01-13

Automated control of the preform reheating process in the manufacturing of PET containers. Part 1, Definition of the problem and description of the controlled object
P. Stączek    S. Płaska   
758-764
2011-10-30

Cross-linked epoxy-isocyanate blends containing Epidian-6 modified by glycols
M. Bratychak    O. Ivashkiv    P. Bruzdziak    J. Namiesnik    O. Shyshchak   
316-321
2021-01-24

Influence of accelerated ageing conditions on the process of polyolefines degradation
D. Sobków    K. Czaja   
627-632
2022-09-17

Effects of bis(2-oxazoline) derivative as compatibilizer and reactive extrusion conditions on the properties of polyamide 6/poly(ethylene terephthalate) blends
R. Jeziórska   
351-358
2022-08-30

Structural transformation of terpolymer poly(L-lactide-glycolide-trimethylene carbonate) with shape memory effect during the degradation process
M. Rom    J. Fabia    C. Ślusarczyk    J. Janicki    J. Kasperczyk    P. Dobrzyński   
562-568
2014-08-30

The course of Mg(OH)2 modified polyethylene extusion process
B. Samujło    R. Sikora   
50-55
2022-09-21

Epoxy resins and networks with anisotropic properties
B. Mossety-Leszczak    H. Galina    M. Włodarska    M. Kowalik    K. Łokaj    Z. Florjańczyk   
719-726
2022-08-18

Effect of high shear rate on the mechanical properties of polyethylene, poly(ethylene terephthalate), polystyrene and polypropylene waste blend

Mohd Adly Rahmat Saat    Rozaidi Rasid   
72-75
2022-02-24

Structural changes in rapeseed oil fatty acids methyl esters during ctalytic oxidation at temperature 200°C
I. Gaweł    Ł. Niczke    F. Czechowski   
658-665
2022-08-26

Multilayer hybrid polypropylene composite with single and wood-polymer composites layers
A. Kościuszko    T. Sterzyński    K. Piszczek   
755-761
2021-01-13

The influence of accelerated aging on selected mechanical properties of polypropylene with organic fillers
Małgorzata Szymiczek    Monika Chomiak    Błażej Chmielnicki    Sara Sarraj    Paulina Gołuch   
308-316
2022-09-09

Measuring the pressure dependent viscosity at high shear rates using a new rheological injection mould
W. Friesenbichler    I. Duretek    J. Rajganesh    S. R. Kumar   
58-62
2011-01-30

Biobased polyurethane foams modified with natural fillers
A. Prociak    M. Kurańska    E. Malewska    L. Szczepkowski    M. Zieleniewska    J. Ryszkowska    J. Ficoń    A. Rząsa   
592-599
2015-09-30

Simulations of injections of selected multiprocessed thermoplastics
M. Heneczkowski   
359-367
2022-09-19

Rheometric studies on the processes of crosslinking of polyethylene and ethylene copolymers in the presence of peroxides.
M. Uhniat    M. Zemlak    S. Kudła    W. Balcerowiak   
816-823
2022-09-17

Laser modification of polymeric materials. Part II. Chemical reactions induced by laser beam
P. Rytlewski    M. Żenkiewicz   
404-410
2022-08-26

Chemical modification of starch by reactive extrusion
K. Wilpiszewska    T. Spychaj   
268-275
2022-08-23

Study on the course of biodegradation of PVC/cellulose composites
H. Kaczmarek    K. Bajer   
631-638
2022-08-23

Water-soluble carbamoylethylated derivatives of potato starch. Part I. Synthesis and structure
S. Rupiński    Z. K. Brzozowski    K. Skwara   
821-830
2022-09-01

Synthesis, thermal and performance properties of poly(urethane-dimethylsiloxane) anionomers. Part I. Structural studies
Ł. Byczyński    P. Król   
188-194
2013-03-30

Effect of structure on the thermal stability of crosslinked poly(ester-urethane)
S. Oprea   
120-125
2009-02-12

Modeling of starve-fed single screw extrusion of wood-polymer composites
K. J. Wilczyński    A. Nastaj    K. Buziak   
542-548
2021-01-13

The utilization of rigid polyurethane-polyisocyanurate foams by the combined alcoholysis-aminolysis process
B. Czupryński    J. Paciorek-Sadowska    J. Liszkowska    J. Czupryńska   
104-109
2022-09-18

Thermal investigations of curing process of EPYŽ epoxy system
M. Urbaniak    K. Grudziński   
89-93
2022-09-01

Influence of accelerated weathering on mechanical and thermomechanical properties of poly(lactic acid) composites with natural waste filler
Mateusz Barczewski    Jacek Andrzejewski    Danuta Matykiewicz    Agnieszka Krygier    Arkadiusz Kloziński   
119-126
2021-01-12

Rheological properties of mixed gels of oat ß-glucan and whey proteins
W. Gustaw    D. Szwajgier   
284-289
2012-04-30

Application of in-line rheological measurements for characterization of polypropylene/opoka rock powder composites
Arkadiusz Kloziński    Paulina Jakubowska    Joanna E. Przybylska    Robert Przekop   
282-289
2021-01-12

Kinetics of decomposition of poly(vinyl chloride)/low-migration polyesterurethane plasticizer blend - a thermogravimetric study
B. Świerz-Motysia    K. Pielichowski   
601-604
2022-09-01

Characteristics of silica nanopowders and sol containing immobilized nanoparticles of copper or silver
M. Zielecka   
765-768
2011-10-30

Polyolefins filled with waste rigid polyurethane foam and compatibilized by solid-state shear pulverization during extrusion
R. Steller    G. Kędziora    G. Mitchener    K. Fiłon    R. Kołbuc    K. Lenart    J. Śliwiński   
s. 181-186
2021-01-15

Study on biodegradation of polymeric materials. Part I. Basic definitions and methods of evaluation of biodegradation of polymer materials
H. Kaczmarek    K. Bajer   
716-721
2022-08-30

Thermoforming of polylactide nanocomposite films for packaging containers
M. Żenkiewicz    J. Richert   
299-302
2009-04-20

Studies on utilization of potato slops in the production of rigid polyurethane-polyisocyanurate foams
B. Czupryński    G. Kłosowski    K. Kotarska    J. Sadowska   
439-441
2022-09-21

Rheological properties of polypropylene composites with calcium carbonate under high shear rates
Arkadiusz Kloziński    Krzysztof Lewandowski    Jacek Mirowski    Mateusz Barczewski    Paulina Jakubowska   
403-412
2023-10-18

Syntheses, structures, electric conduction, electrochemical properties and antimicrobial activity of azomethine monomer and oligomer based on 4-hydroxybenzaldehyde and 2-aminopyridine
I. Kaya    A. Bilici   
827-835
2022-08-26

Physicochemical and mechanical properties of natural cellulosic fiber from Coccinia Indica and its epoxy composites
M. Bhuvaneshwaran    P. S. Sampath    S. Balu    S. Sagadevan   
656-664
2021-01-12

Material recycling of RIM flexible polyurethane foams wastes
M. Heneczkowski    H. Galina   
523-527
2022-09-18

Synthesis and curing of new liquid crystalline epoxy monomers
B. Mossety-Leszczak    H. Galina    M. Włodarska   
511-519
2022-09-17

Chemically crosslinked polyethylene foams of limited flammability
A. Raszkowska-Kaczor    A. Stasiek    K. Janczak    E. Olewnik-Kruszkowska   
283-285
2015-04-30

Antibacterial polyester fibers containing silver ions. Part II. Studies on the kinetics of the release of deposited silver ions and on selected properties of modified fibers
A. Karaszewska    J. Bucheńska   
851-854
2010-12-30

Injection molding contraction and p-v-T relation
B. Kowalska   
280-285
2022-08-26

Separation of high-density polyethylene/poly(ethylene terephthalate)/poly(vinyl chloride) mixtures based on differences in their hardness
K. Królikowski    K. Piszczek   
599-602
2021-01-15

Azidoxanthone and azidofluorane-photoinitiated polymerizations of methyl methacrylate
E. Novikova    A. Kolendo    V. Syromyatnikov    T. Prot    K. Golec   
406-413
2022-09-19

Effects of stress and biological environment on polymeric implants' durability
J. Chłopek   
182-189
2022-09-01

1 - 150 of 150 items
Łukasiewicz Research Network – Industrial Chemistry Institute
ul. Rydygiera 8,
01-793 Warszawa
email: polimeryjournal@ichp.lukasiewicz.gov.pl
tel. +48 22 633 98 04
Links:
https://ichp.lukasiewicz.gov.pl
https://lukasiewicz.gov.pl
About:
Copyright 2019 by Łukasiewicz Research Network – Industrial Chemistry Institute
OJS Support and Customization by LIBCOM
Platform & workfow by OJS/PKP