Register Login ##{$loggedInUsername}##
 
  Język Polski   English
baner

Advanced filters
 

Search Results

The impact of flow induced changes of polymers density on rheological measurements
A. Kloziński    T. Sterzyński    B. Samujło   
57-61
2009-01-10

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions
K. Formela    M. Bogucki   
488-494
2014-06-30

Granulator knife wedge angle effect on constructional efficiency of the extrusion process with polyethylene
J. W. Sikora   
196-200
2022-09-18

Effect of thermooxidative and photooxidative ageing processes on mechanical properties of magnetorheological elastomer composites
M. Masłowski    M. Zaborski   
264-271
2015-04-30

The effect of cross-linking density on the termination mechanism in network radical polymerization
E. Andrzejewska    E. Socha    M. Andrzejewski    M. B. Bogacki   
845-848
2022-09-18

Influence of preparation method of keratin fibers from poultry feathers on the properties of composites from recycled high density polyethylene
K. Wrześniewska-Tosik    S. Zajchowski    J. Ryszkowska    J. Tomaszewska    J. Mirowski    K. Szoła   
109-117
2015-02-28

Wood filled high density polyethylene composites with nanosilica containing immobilized nanosilver
R. Jeziórska    M. Zielecka    A. Szadkowska    M. Wenda    L. Tokarz   
192-203
2012-03-30

Structure and properties of self-extinguishing rigid polyurethane foam with inorganic filler

Małgorzata Szymiczek    Sara Sarraj    Monika Chomiak    Błażej Chmielnicki    Izabela Gajlewicz   
211-222
2024-05-22

Modification of low density polyethylene for manufacturing of oxo-biodegradable films
R. Machlarz    M. Heneczkowski   
754-759
2014-10-30

Application of in-line measurement technique for evaluation of rheological properties of polyethylene/calcium carbonate composites
A. Kloziński   
788-798
2021-01-24

Crosslinking of binary blends of ethylene/vinyl acetate copolymer and low density polyethylene or metallocene polyolefin elastomer as heat-shrinkable materials
S. Kudła   
3-7
2009-01-10

Assessment of the effectiveness of selected blowing agents in the injection molding of thermoplastic materials
P. Palutkiewicz    T. Garbacz   
447-456
2021-01-15

Rigid polyurethane foams moulded with new generation blowing agents
A. Prociak    M. Figura   
565-567
2022-09-17

Polymers for peptide/protein arrays
R. Szweda    D. Lipowska    J. Silberring    A. Dworak    B. Trzebicka   
75-86
2015-02-28

Properties of butadiene-acrylonitrile rubber containing precipitated aminoacid modified chalk
M. Zaborski    M. Lipińska   
428-435
2022-09-18

Effect of iron(III) acetylacetonate additive on selected properties of composites of low density polyethylene with magnesium hydroxide
A. Wojtala   
685-688
2010-09-30

Spherulite nucleation density from thin sections of bulk samples
K. Gadzinowska    E. Piorkowska   
698-705
2022-09-01

Microcellulose as a natural filler in polyurethane foams based on the biopolyol from rapeseed oil
M. Kurańska    A. Prociak    S. Michałowski    U. Cabulis    M. Kirpluks   
625-632
2021-01-24

Gradient structure of polymer materials
D. M. Bieliński    M. Kajzer    L. Ślusarski    Ł. Kaczmarek   
298-304
2022-09-01

Polyurethane foams based entirely on recycled polyols derived from natural oils
P. Horák    H. Beneš   
579-585
2015-09-30

Dimensional stability, physical, mechanical and thermal properties of high density polyethylene with peanut hulls composites
K. Sałasińska    J. Ryszkowska   
461-466
2013-06-30

Thermal analysis of swollen sulfur vulcanizates of butadiene-acrylonitrile rubber
G. Janowska    L. Ślusarski    P. Rybiński   
196-200
2022-09-01

Preparation and characterization of low density polyethylene nanocomposites with modified montmorillonite clay
M. Nour    M. Elgazery    W. Awad    M. Amer   
536-540
2022-08-18

Evaluation of the Reynolds number in rheological measurements of polyethylene
A. Kloziński   
575-581
2010-08-30

Effects of blowing agent content and injection moulding conditions on selected properties and surface quality of polypropylene moulded parts
E. Bociąga    P. Palutkiewicz   
38-48
2012-01-30

Influence of cellulose on mechanical and thermomechanical properties of elastomers obtained from mixtures containing natural rubber
J. Datta    E. Głowińska   
823-827
2011-12-30

Effect of maleated linear low density polyethylene on the structure and mechanical properties of terpolymer acrylonitryle-butadiene-styrene based blend wastes
R. Jeziórska    A. Szadkowska    A. Abramowicz   
705-713
2012-10-30

Thermo-catalytic degradation of low density polyethylene over clinoptilolite - the effect of carbon residue deposition
K. Tomaszewska    J. Kałużna-Czaplińska    W. Jóźwiak   
222-226
2010-03-30

Fire resistant glass fabric-epoxy composites with reduced smoke emission
Rafał Oliwa    Mariusz Oleksy    Joanna Oliwa    Aleksandra Węgier    Sławomir Krauze    Maciej Kowalski   
290-293
2021-01-12

Effects of electron radiation and styrene elastomer on some mechanical properties of polymer composites
M. Żenkiewicz    J. Polański    T. Karasiewicz    J. Czupryńska    W. Engelgard   
297-303
2022-08-23

Polyolefins filled with waste rigid polyurethane foam and compatibilized by solid-state shear pulverization during extrusion
R. Steller    G. Kędziora    G. Mitchener    K. Fiłon    R. Kołbuc    K. Lenart    J. Śliwiński   
s. 181-186
2021-01-15

The influence of cellular T8 oligosilsesquioxanes on mechanical properties of silicone rubber
A. Wojtas    M. Zaborski    A. Kosmalska   
208-214
2010-03-30

Effect of photooxidative ageing at natural conditions on dynamic mechanical properties of PE-LD/PE-LLD blends
A. Ribes-Greus   
250-254
2009-04-20

Transition metal chlorides complexes with tetrahydrofuran [MtCl(4)(THF)(2)] used as precursors of ethylene polymerization
K. Szczegot    Z. Flisak    I. Sibelska    B. Dawidowska-Marynowicz   
85-89
2022-09-18

Nanocomposites of polypropylene and polyethylene with montmorillonite type clays
A. Pawlak    J. Morawiec    E. Piorkowska    A. Galeski   
240-247
2022-09-01

Selected properties of recycled polypropylene obtained from porous injection molded parts
D. Sykutera    M. Bieliński   
602-605
2014-08-30

Influence of fiber reinforcement towards the physical characteristics of low density polyethylene laminated composites
S. Ravichandran    A. Daniel Raj    P. Balaji Visvanath    Faruq Mohammad    Hamad A. Al-Lohedan    Suresh Sagadevan   
449-457
2020-12-16

The effect of modified biopolymers and poly(vinyl alcohol) on carboxylated acrylonitrile-butadiene rubber properties
M. Prochoń    Y. H. Tshela Ntumba   
508-515
2015-08-30

Curing of acrylonitrile-butadiene rubber with tetraisobutylthiuram disulfide
W. M. Rzymski    M. Mikrut    J. Magryta    B. Wolska   
718-722
2022-09-01

Selected properties of extruded bimodal high density polyethylene film
Z. Frąszczak    B. Królikowski   
132-138
2009-02-12

The influence of materials dosing order and shear forces on the properties of high density polyethylene/ground tire rubber blends obtained in co-rotating twin screw extruder
K. Formela    M Cysewska    J. Haponiuk   
324-332
2014-04-30

Comparison study of the influence of carbon and halloysite nanotubes on the preparation and rheological behavior of linear low density polyethylene
Maksymilian Burzynski                               
95-98
2020-12-15

Rheometric studies on the processes of crosslinking of polyethylene and ethylene copolymers in the presence of peroxides.
M. Uhniat    M. Zemlak    S. Kudła    W. Balcerowiak   
816-823
2022-09-17

Effects of the flame retardant and lubricant types on fire retardancy effectiveness of medium density polyethylene
B. Samujło   
191-194
2022-09-01

Effect of ionic liquids on the selected properties of magnetic composites filled with micro-sized iron oxide (Fe3O4)
M. Masłowski    A. Strąkowska    M. Pingot    M. Zaborski   
117-124
2021-01-24

All-polymer composites – a new approach with the use of disentangled semi-crystalline polymers. Part II. Preparation of composites from partially disentangled polylactide
Justyna Krajenta    Andrzej Pawlak    Andrzej Galeski   
261—267
2020-12-15

The effect of compatibilization in reactive processing low density polyethylene/polyamide 6/EPDM blends
R. N. Darie    C. Vasile    M. Kozłowski   
656-661
2022-08-30

The effect of the heat treatment on the crosslinking of epoxy resin for aviation applications
Mateusz Mucha    Tomasz Sterzyński    Aneta Krzyżak   
776-783
2020-12-17

The role of functional polymers in rubber powder/thermoplastic composites
E. V. Prut    L. A. Zhorina    L. V. Kompaniets    D. D. Novikov    A. Y. Gorenberg   
548-555
2021-01-15

New organic peroxides as the agents curing elastomers
M. Zaborski    M. Skurska    M. Przybyszewska    T. Pingot    J. Zawadiak    B. Orlińska    D. Gillner   
293-298
2010-04-30

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions
E. Sasimowski    J. W. Sikora    B. Królikowski   
505-510
2014-06-30

Antistatic polyethylene free-standing films modified with expanded graphite – technological aspects
Paweł Imiołek    Krzysztof Kasprowicz    Jadwiga Laska   
275-279
2020-12-15

The effect of nanosilica filler on the foaming process and properties of flexible polyurethane foams obtained with rapeseed oil-based polyol
E. Malewska    A. Prociak   
472-479
2015-08-30

Effects of chemical and supermolecular structures on mechanical properties of polyurethane/unsaturated polyester compositions of interpenetrating polymer networks types
P. Król    J. Wojturska   
790-800
2022-09-01

Preparation and characterization of silver sulfathiazole-epoxy resin networks
L. Rosu    C. Ciobanu    D. Rosu    C. N. Cascaval   
644-648
2022-08-23

The influence of expandable polystyrene fillers on properties of water-blown rigid polyurethane foams
E. Malewska    M. Trzyna    A. Sabanowska    A. Prociak    P. Koniorczyk   
865-868
2011-12-30

New amine adducts with carbon dioxide as blowing agents in the production of integral polyurethane foams
Leonard Szczepkowski    Joanna Ryszkowska    Monika Auguścik-Królikowska    Milena Leszczyńska    Sylwia Przekurat    Adam Przekurat   
681—690
2020-12-16

Phosphorylated phenolic resins
M. Kędzierski    Z. Florjańczyk   
511-515
2022-09-19

Comparison of the effect of chosen commercial suspension stabilizers on some properties of poly(vinyl chloride). Part 1, Effect on grain size distribution
A. Abramowicz   
593-600
2022-09-01

Studies in the effectiveness of a new generation extruder. Part III. Co-operation of the rotational sleeve with the grooved zone of barrel
E. Sasimowski   
747-754
2012-10-30

Biobased polyurethane foams modified with natural fillers
A. Prociak    M. Kurańska    E. Malewska    L. Szczepkowski    M. Zieleniewska    J. Ryszkowska    J. Ficoń    A. Rząsa   
592-599
2015-09-30

Effect of porophor content on the useful properties of external coatings of cables obtained by foaming extrusion
T. Garbacz    A. Tor   
286-293
2022-08-26

Hyperbranched multimethacrylate resins of low viscosity and low oxygen inhibition for dental applications
A. K. Tomasik    M. Biernat    P. G. Parzuchowski   
284-292
2010-04-30

Studies in the effectiveness of a new generation extruder. Part IV. The comparison of performance of the extruder model with its prototype
E. Sasimowski   
597-604
2013-08-30

Semi-rigid polyurethane foams with rapeseed polyol of different viscosity
J. Ryszkowska    M. Auguścik    M. Zieleniewska    L. Szczepkowski    M. Kurańska    S. Bąk    M. Antos-Bielska    A. Prociak   
10-17
2021-01-13

Studies on utilization of potato slops in the production of rigid polyurethane-polyisocyanurate foams
B. Czupryński    G. Kłosowski    K. Kotarska    J. Sadowska   
439-441
2022-09-21

Effect of selected auxiliary agents on the properties of surface layer of extruded polyethylene
T. Garbacz   
23-28
2022-09-01

Polyurethane composites with nanosilica modified with isocyanate groups
J. Ryszkowska    B. Waśniewski    A. Pytel    M. Zielecka   
737-746
2022-08-18

Studies in the effectiveness of a new generation extruder. Part I. The influence of the location of the rotating sleeve of the barrel in the plasticizing system
E. Sasimowski   
390-396
2011-05-30

Use of response surface methodology in characterization of properties of recycled high density polyethylene/ground tire rubber compositions
M. Żenkiewicz    T. Żuk    M. Błaszkowski   
495-504
2014-06-30

Deformation of semicrystalline polymers – the contribution of crystalline and amorphous phases
Z. Bartczak   
787-799
2021-01-15

Preparation and characterization of polymer blends based on the wastes from automotive coverings
Paweł Lesiak    Jacek Zieliński    Agnieszka Kochmańska    Elżbieta Piesowicz    Izabela Irska    Sandra Paszkiewicz    Jan Zieliński    Łukasz Sadkowski    Mateusz Wypych    Grzegorz Kramek    Aleksandra Wiktorczyk    Konrad Walkowiak    Alicja Kisielowska    Roman Worzała   
232-239
2020-12-15

The analysis of visibility range in smoke generated during combustion of polyester materials
M. Konecki    M. Półka   
293-300
2022-08-30

Effect of aerogel on the properties of acrylonitrile-butadiene rubber (NBR) vulcanizates
J. Magryta   
117-123
2012-02-28

Chemically crosslinked polyethylene foams of limited flammability
A. Raszkowska-Kaczor    A. Stasiek    K. Janczak    E. Olewnik-Kruszkowska   
283-285
2015-04-30

Synthesis and properties of vinylpyrrolidone/ (trimethoxysilyl)propyl methacrylate gels containing different amounts of crosslinking agent
A. H. Mohammed    M. B. Ahmad    N. A. Ibrahim    N. Zainuddin   
577-585
2021-01-13

UV-curable powder transparent coatings based on oligo(meth)acrylic resins
Katarzyna Pojnar    Barbara Pilch-Pitera    Maciej Kisiel    Aleksandra Zioło    Michał Kędzierski   
11-24
2024-02-13

Selected properties of geometric structure of the surface of cellular polyethylene products
T. Garbacz    B. Samujło   
471-476
2022-08-23

Recycling of automotive lighting — effect of UV cured coating contaminants on polycarbonate toughness
J. Rybnicek   
849-855
2011-12-30

Characterization of maleated vegetable oils for insulation purposes and agricultural applications
M. A. Saied    S. H. Mansour    A. A. Ward    I. S. Rahim    H. A. Zayed    A. L. Saad    K. N. Abdel Nour   
729-738
2014-10-30

Rigid polyurethane foam composites with nut shells
Milena Leszczyńska    Joanna Ryszkowska    Leonard Szczepkowski   
728-737
2020-12-16

Simulations of injections of selected multiprocessed thermoplastics
M. Heneczkowski   
359-367
2022-09-19

Organosilicon polymer for the release of antimicrobial drugs
Sara Sarraj    Małgorzata Szymiczek   
149-157
2022-05-13

Coagents for peroxide crosslinking of ethylene-propylene copolymer
A. Krzywania-Kaliszewska    M. Maciejewska    M. Zaborski   
734-739
2012-10-30

Determination of viscosity curves based on limited rheological measurements
K. J. Wilczyński   
441-446
2021-01-15

Characteristic of the extrusion of polyethylene modified with halogen free flame retardants and additives
B. Samujło   
540-544
2022-09-17

Modification of styrene-butadiene rubber with polymethylsiloxanes. Part II. Systems filled with silica
D. Bieliński    P. Głąb    J. Chruściel   
268-273
2022-08-26

The influence of cyclization and crosslinking on the properties and networks of photoinitiated multifunctional methacrylate polimers derived from succinic anhydride and their copolimers with styrene
M. Podgórski    J. Księżopolski    E. Chmielewska   
277-283
2010-04-30

Effects of carbon nanotubes and graphene on the structure and properties of natural rubber
Jinyong Sui    zhengu    Xiaoyi Zhang    Zhenxu Li    Lining Song    Lina Yang    Ning Wang   
217-223
2021-05-07

Polyurethane composites with enhanced thermal conductivity containing boron nitrides
Mariola Sadej    Lukasz Gierz    Magdalena Naumowicz   
591-594
2021-01-12

Static-condition no-emulsifier potassium persulfate-initiated homo and copolymerizations of styrene. Part I. Homopolimerization of styrene
D. Wilson-Polit    A. Orzechowski    I. Grzywa-Niksińska    E. Grzywa    V. Izmailova    A. Oganesyan    I. Gritskova   
399-404
2022-09-21

Properties of polyethylene filled with magnesium hydroxide modified with a silane compound and promoted with iron(III) acetylacetonate
A. Wojtala   
114-120
2011-02-28

Analysis of the influence of zinc stannates and keratin powder on the flammability properties of epoxy material
M. Półka    B. Kukfisz    A. Kulik   
764-771
2021-01-15

Polypropylene composites with porous and solid structure reinforced with cut fibers
Jolanta Janik   
208-215
2020-12-15

Choice of the number and placement of the extruder barrel plasticating grooves as the possibility of extrusion process controlling
J. W. Sikora   
285-292
2022-08-30

Polyethylene composites flame retarded with aluminum hydroxide as coatings for electrical cables
A. Frańczak    M. Oleksy    R. Oliwa    G. Budzik   
458-461
2021-01-13

Thermal and mechanical properties of PLA/ENR thermoplastic vulcanizates compatibilized with tetrafunctional double-decker silsesquioxanes

Sandra Paszkiewicz    Grzegorz Kramek    Konrad Walkowiak    Izabela Irska    Elżbieta Piesowicz    Monika Rzonsowska    Beata Dudziec    Mateusz Barczewski   
593-606
2024-01-04

Modification of low density polyethylene with allylurea
A. Wojtala    W. Herzog    K. Czaja   
684-689
2022-09-01

Polyolefins functionalization by copolymerization of ethylene (propylene) with substituted norbornene
I. N. Meshkova    V. G. Grinev    E. B. Kiseleva    L. N. Raspopov    A. N. Shchegolikhin    S. P. Kuznetsov    A. V. Mitrofanov    S. V. Shestov    A. I. Udovenko    T. A. Ladygina    L. A. Novokshonova   
345-352
2022-08-23

The influence of a porous sealing insert on forces and deformations occurring in a threaded connection of a polymer packaging
M. Bieliński    P. Czyżewski   
673—676
2014-09-30

Effect of the method of photopolymerization of dental composites based on dimethacrylate resin on the shrinkage stresses and selected properties of the cured material
K. Bociong    M. Krasowski    M. Domarecka    J. Sokołowski   
499-508
2021-01-24

Tall oil based rigid polyurethane foams thermal insulation filled with nanofibrillated cellulose
Mikelis Kirpluks    Aiga Ivdre    Anda Fridrihsone    Ugis Cabulis   
719-727
2020-12-16

Computer modeling of melt spinning from a crystallizing polymer. Part I. The mathematical model
L. Jarecki   
335-343
2022-09-19

Degradation of electron beam irradiated hydrogenated butadiene-acrylonitrile rubber. Influence of bounded acrylonitrile content
J. M. Bik    W. Głuszewski    W. M. Rzymski    Z. P. Zagórski   
266-270
2022-09-01

Application of computer simulation of thermoset resins casting in rapid prototyping techniques
M. Oleksy    M. Heneczkowski    G. Budzik   
895-898
2010-12-30

Polyols from recycled poly(ethylene terephthalate) flakes and rapeseed oil for polyurethane foams
A. Paberza    A. Fridrihsone-Girone    A. Abolins    U. Cabulis   
572-578
2015-09-30

Surface free energy of composite materials with high calcium carbonate filler content
A. Rudawska    P. Jakubowska    A. Kloziński   
434-440
2021-01-15

Investigations of the process of oxidation of polyethylene film, modified with high energy electron beam, using infrared spectroscopy and photoelectron spectroscopy methods
M. Żenkiewicz    M. Rauchfleisz    J. Czupryńska   
343-350
2022-09-17

Preparation and characteristics of polypropylene composites
Z. Majchrzak    J. Lipczyński   
190-194
2022-08-26

Effect of modifiers on the flammability and physical properties of polyamide 6
K. Kelar    B. Jurkowski    K. Mencel   
365-370
2013-05-30

Mechanical properties under quasi-static loading of the core made of flax/poly(lactic acid) composite
M.Y.M. Zuhri    M.A. Nasrudin    M.A.M. Nasrodin    S.M. Sapuan    M.Z. Hassan   
193-197
2021-04-13

Titanium -magnesium catalysts containing tetrahydrofuran and ethyl acetate for ethylene polymerization
K. Szczegot    I. Sibielska-Wiercigroch    J. Efler    Z. Flisak   
344-348
2022-09-21

Polyetherols with purine ring
J. Lubczak   
805-811
2022-09-01

Comparison of imidazolium and pyridinium ionic liquids as the media for biphasic ethylene polymerization in the presence of titanocene catalyst
W. Ochędzan-Siodłak    K. Dziubek    K. Czaja   
501-506
2022-08-18

Structure and properties of cellular thin-walled cable coatings
T. Garbacz   
865-868
2012-12-30

Wheat straw lignin as filler for rigid polyurethane foams on the basis of tall oil amide
A. Paberza    U. Cabulis    A. Arshanitsa   
477-481
2014-06-30

Assessment of influence of extrusion method on selected properties of wood-polymer composites using Taguchi method of experiment planning
I. Michalska-Pożoga    S. Węgrzyk    T. Rydzkowski   
686-692
2021-01-15

Milled basalt fibers as reinforcement for polyurea composite spray coatings with improved thermomechanical stability and mechanical performance
Mateusz Barczewski    Kinga Biedrzycka    Olga Mysiukiewicz    Danuta Matykiewicz    Jacek Andrzejewski    Arkadiusz Kloziński    Marek Szostak   
184-195
2020-12-15

The utilization of rigid polyurethane-polyisocyanurate foams by the combined alcoholysis-aminolysis process
B. Czupryński    J. Paciorek-Sadowska    J. Liszkowska    J. Czupryńska   
104-109
2022-09-18

Effect of poly(ethylene terephthalate) and polyethylene comminution on the mechanical and thermal properties of polymer compositions
B. Królikowski   
752-759
2022-08-26

Combustion behavior of polyethylene/modified montmorillonite clay nanocomposites prepared by ultrasonication
M. A. Nour    M. Elgazery   
452-456
2010-06-30

Elastomeric magnetic composites – physical properties and network structure
J. Kruželák    I. Hudec    R. Dosoudil   
25-32
2012-01-30

Fly ash used as a reinforcing and flame-retardant filler in low-density polyethylene
A. Porąbka    K. Jurkowski    J. Laska   
251-257
2015-04-30

Novel hybrid composites based on polypropylene with basalt/carbon fiber
S. Kuciel    A. Kufel   
387-390
2021-01-13

Morphology and selected properties of kenaf fiber/cornhusk reinforced corn starch hybrid biocomposites
M.D. Hazrol    S.M. Sapuan    R.A. Ilyas    E.S. Zainudin    M.Y.M. Zuhri    N.I. Abdul Wahab   
575-588
2023-01-11

Effect of ricinol-2-oxazoline methylmaleate on the structure and properties of polyamide 6 and low density polyethylene blends
R. Jeziórska   
623-633
2022-09-01

Studies on the smoke formation and heat release rates of unmodified and flame retardant-modified epoxy materials
M. Półka   
734-742
2011-10-30

Effect of stress and temperature on the thermomechanical degradation of a PE-LD/OMMT nanocomposites
F. P. La Mantia    M. Morreale    M. Ceraulo    M. C. Mistretta   
667—672
2014-09-30

Surface modification of methylvinylsilicone rubber vulcanizates with polyhedral oligomeric silsesquioxanes functionalized using chloride groups (POSS-Cl)
A. Strąkowska    A. Kosmalska    M. Zaborski   
272-278
2021-01-24

The use of biodegradable polymer as an alternative raw material for the production of new ecopolyol
Joanna Paciorek-Sadowska    Marcin Borowicz    Marek Isbrandt    Łukasz Grzybowski    Bogusław Czupryński   
667-671
2020-12-16

Effects of zone heating on pet fibers structures and dynamics of melt spinning process. Part I. Crystallinity and molecular orientation
A. Blim    E. Ołdak    A. Wasiak    L. Jarecki   
48-59
2022-09-01

Crosslinking of styrene-butadiene rubber with redox systems at low temperatures
T. Pingot    M. Pingot    M. Zaborski   
825-831
2010-12-30

Nanohybrid polyurethane/functionalized silsesquioxane systems. Part I. Structural investigations using FT-IR and NMR methods
B. Janowski    K. Pielichowski   
518-528
2012-08-30

Effect of the content of rigid segments on the properties of polycarbonate urethanes for use in intervertebral disc implants
M. Auguścik    B. Waśniewski    M. Krzyżowska    J. Dąbrowski    J. Ryszkowska    W. Karalus   
551-558
2015-09-30

Homopolymerization of 3-chloro-2-hydroxypropyl methacrylate and its copolymerization with methyl methacrylate
J. Łukaszczyk    A. Cebulska   
268-272
2022-09-17

Mechano-chemical recycling of sulfur cured natural rubber
G. K. Jana    R. N. Mahaling    T. Rath    A. Kozłowska    M. Kozłowski    Ch.K. Das   
131-136
2022-08-26

Magnetorheological materials based on ethylene-octene elastomer
M. Masłowski    M. Zaborski   
825-833
2014-12-30

Investigation of the resistance to environmental stress crack of high density polyethylene parts Rapid Communication
M. Bieliński    P. Czyżewski    A. Kościuszko   
850-854
2021-01-24

Epoxy composites reinforced with natural fillers such as flax fiber and linseed cakes
Danuta Matykiewicz    Olga Mysiukiewicz   
828-832
2020-12-17

Natural fiber­reinforced polymers come back
K. A. Błędzki    J. Gassan    M. Łucka   
98-108
2022-09-21

Possibility of application of glycerol for selection of polyurethane foam systems compositions
J. Pielichowski    M. Marek    A. Prociak   
723-727
2022-09-01

Abrasive wear of urethane elastomers based on monomeric or polymeric diisocyanate MDI
P. Michalski    M. Nachman    K. Kwiatkowsk   
839-845
2012-12-30

Can polyisocyanurate nanofoam challenge aerogels?
G. Mitchener   
339-342
2014-04-30

Composites of rigid polyurethane-polyisocyanurate foams with oak bark
J. Paciorek-Sadowska    M. Borowicz    B. Czupryński    J. Liszkowska   
666-672
2021-01-15

All-polymer composites – a new approach with the use of disentangled semi-crystalline polymers. Part I. Disentangling and properties of disentangled polylactide
Justyna Krajenta    Marta Safandowska    Andrzej Pawlak    Andrzej Galeski   
167-173
2020-12-15

Insight into protein dynamics from nuclear magnetic relaxation studies
A. Ejchart   
745-751
2022-08-26

Rheological studies of highly-filled polyolefinic composites taking into consideration p-v-T characteristics
P. Jakubowska    T. Sterzyński    B. Samujło   
379-389
2010-05-30

Assessment with indentation techniques of the local mechanical behavior of joints in polymer parts
R Lach    P Hutař    P Veselý    E Nezbedová    Z Knésl    T Koch    C Bierögel    W Grellmann   
900-905
2013-12-30

A new extrusion head with integrated ultrasonic device and online process parameters measurements system — design and testing
M. Muniesa    Á. Fernández    I. Clavería    C. Javierre    J. A. Sarasua    M. Blanco   
209-216
2015-03-30

The effect of ground coffee on the mechanical and application properties of rigid polyurethane-polyisocyanurate foams
J. Liszkowska   
305-310
2021-01-13

Influence of chemical foaming on the structure and selected properties of glass fiber reinforced PA6
Natalia Konczal    Bartosz Nowinka    Marek Bieliński   
475-482
2022-11-17

Heat-insulating properties of rigid polyurethane foams synthesized with use of vegetable oils - based polyols
A. Prociak   
195-200
2022-08-24

Hydrogen bonds in camphorsulfonic acid doped polyaniline
W. Łużny    K. Piwowarczyk   
652-656
2011-09-30

Electrochemical polymerization of polymers for photovoltaic cell applications
K. Wójcik    A. Iwan   
239-247
2021-01-24

Solidification/stabilization of industrial wastes using polyurethanes
A. Bańkowska    R. Ostrysz    P. Penczek   
833-836
2022-09-18

Application of epoxidized soybean oil for the control of viscosity of epoxy compositions
P. Czub   
821-828
2022-08-30

Polyurethane foams based on oligoetherols obtained from 6-aminouracil and alkylene carbonates
E. Chmiel-Szukiewicz   
817-824
2010-12-30

Modification of amorphous phase of semicrystalline polymers
A. Rozanski    A. Galeski   
433-440
2012-06-30

The effect of N,N’-bis(benzoyl)dodecanedihydrazide on enhancing the crystallization rate of poly(L-lactic acid)
Y.-H. Cai    L.-S. Zhao   
815-820
2021-01-13

Thermal properties of butadiene-acrylonitrile rubbers
P. Rybiński    G. Janowska    S. Kuberski   
183-187
2022-09-17

Microcellular polymer and composites. Part II. Properties of different types of microcellular materials
A. K. Błędzki    O. Faruk    H. Kirschling    J. Kühn    A. Jaszkiewicz   
3-12
2022-08-26

Crosslinking polymerization of polyfunctional monomers by free radical mechanism
C. D. Vlad    S. Vasiliu   
181-185
2010-03-30

Morphology, mechanical and thermal properties of flexible polyurethane foams modified
Ł. Piszczyk    A. Hejna    K. Formela    M. Danowska    M. Strankowski   
783-791
2014-12-30

Rigid polyurethane foam composites with vegetable filler for application in the cosmetics industry
M. Zieleniewska    L. Szczepkowski    M. Krzyżowska    M. Leszczyński    J. Ryszkowska   
807-814
2021-01-24

The influence of halloysite on the physicochemical, mechanical and biological properties of polyurethane- -based nanocomposites
Maciej Mrówka    Małgorzata Szymiczek    Tomasz Machoczek    Joanna Lenża    Jakub Matusik    Piotr Sakiewicz    Magdalena Skonieczna   
784-791
2020-12-17

The effect of zinc oxide on the properties of ethylene—propylene rubbers
M. Zaborski    M. Owczarek    J. Leo   
678-683
2022-09-19

Thermoplastic polyurethane foamed under microwave irradiation
A. Prociak    S. Michałowski    S. Bąk   
786-790
2012-12-30

Thermal aging of hydrogenated nitrile rubber – loss of additives and its influence on elasticity maintenance
X. Liu    J. Zhao    R. Yang    R. Iervolino    S. Barbera   
588-598
2021-01-15

Studies on utilization of wheat slops for production of rigid polyurethane-polyisocyanurate foam
J. Paciorek-Sadowska    B. Czupryński    J. Liszkowska   
461-464
2022-08-26

Selected problems in the pyrolysis of waste polymers. Part I. The problem related to the presence of chlorine in pyrolytic oils from the view point of the present state of knowledge
K. German   
351-357
2010-05-30

Antifouling surfaces in medical application
A. Utrata-Wesołek   
685-695
2013-09-30

Modeling of starve-fed single-screw extrusion of thermoplastic polyblends
K. J. Wilczyński    A. Nastaj   
199-208
2015-03-30

Study on the properties of polyester composites reinforced by glass and natural fibers
J. Jaszewski    S. Zajchowski    J. Tomaszewska    J. Mirowski   
109-114
2021-01-13

Class C fly ash as a substitute for mineral fillers in asphalt mixtures
Sajjad Ali    Dr. Muhammad Owais Raza Siddiqui    Syed Muhammad Noman    Tahreem Beg    Danmei Sun   
443-449
2022-09-23

Coagents for peroxide curing of hydrogenated acrylonitrile-butadiene elastomer
M. Przybyszewska    M. Zaborski    A. Masek   
814-819
2022-08-18

The mechanical properties and conduction of solid polyurethane electrolytes depending on the methods of synthesis and LiClO4 content as addition
K. Leszkowski    M. Strankowski    A. Miszczyk    J. T. Haponiuk   
578-584
2011-08-30

Monte Carlo simulations and self-consistent field theory applied to calculations of density profiles in A1BA2 triblock copolymer melts
M. Dzięcielski    S. Wołoszczuk    M. Banaszak   
580-584
2014-08-30

The effect of tri(1-chloro-3-etoxy-propane-2-ol) borate on the properties of rigid polyurethane-polyisocyanurate foams
B. Czupruński    J. Paciorek-Sadowska    J. Liszkowska   
727-729
2022-09-18

Composites of recycled oxo-biodegradable foils filled with wood flour
J. Ryszkowska    K. Sałasińska   
740-747
2010-10-30

Properties of polymer composites with copper powders or flakes as fillers
P. Łoś    A. Łukomska    S. Kowalska    R. Jeziórska    J. Krupka   
338-346
2012-05-30

Elastomer composites containing ionic liquids
M. Maciejewska    A. Krzywania-Kaliszewska    M. Zaborski   
501-507
2015-08-30

Effect of nitrogen content on physical properties of glass fiber reinforced polyamide 6 prepared by microcellular injection molding
D. Sykutera    P. Szewczykowski    M. Roch    Ł. Wajer    M. Grabowski    M. Bieliński   
743-749
2021-01-13

Application of waste phosphogypsum in thermoplastic and chemosetting composites
E. Kowalska    Z. Wielgosz    M. Żubrowska    S. Pasynkiewicz    M. Choroś   
828-836
2022-09-01

Structure, thermal stability and mechanical properties of polyurethanes based on glycolysate from polyurethane foam waste, prepared with use of 1,6-hexanediol as a glycol
J. Datta    M. Rohn   
871-875
2022-08-23

New polyol for the production of rigid polyurethane-polyisocyanurate foams. Part I. Characteristics and conditions of new boroorganic polyol preparation
J. Paciorek-Sadowska    B. Czupryński    J. Liszkowska   
29-32
2021-08-31

Preparation and properties of polyurethane/functionalized multi-walled carbon nanotubes rigid foam nanocomposites
M. M. A. Nikje    A. Yaghoubi   
776-782
2014-12-30

The effect of various rapeseed oil-based polyols on selected properties of flexible polyurethane foams
E. Malewska    S. Bąk    M. Kurańska    A. Prociak   
799-806
2021-01-24

The effect of the structure of rigid polyurethane foams blown with a hydrocarbon blowing agent on foam's apparent thermal conductivity
K. Dębski    J. Magiem    J. Pielichowski   
631-637
2022-09-19

Possibility of application of polyurethane foam wastes for heat-insulating materials preparation
A. Prociak    J. Pielichowski   
682-685
2022-09-01

Supermolecular structure, morphology and physical properties of urea-urethane elastomers
J. Ryszkowska   
777-785
2012-12-30

The influence of screw configuration and screw speed of co-rotating twin screw extruder on the properties of products obtained by thermomechanical reclaiming of ground tire rubber
K. Formela    M Cysewska    J. Haponiuk   
170-177
2014-02-28

Atomic force microscopy with fractal studies of temperature induced changes in the surface topography of polymeric materials
Rydzkowski Tomasz    Sławomir Kulesza     Mirosław Bramowicz     Iwona Michalska-Pożoga   
25-32
2020-12-17

Experimental techniques in optimization of the process of injection molding of thermoplastics - After-shrinkage of moldings
M. Bogucki    S. Płaska    P. Stączek   
714-719
2022-09-17

Modification of polyethylene by high energy ion or electron beam - structural, micromechanical and conductivity studies of the surface layer
D. M. Bieliński    C. Ślusarczyk    J. Jagielski    P. Lipiński   
329-335
2022-08-26

Glycopolyoxazoline-lectin interactions. Effects of ligand structure on clustering kinetics
C. Diehl    H. Schlaad   
650-653
2013-09-30

Biodegradable polymers in the general waste stream – the issue of recycling with polyethylene packaging materials
S. Kuciel    P. Kuźniar    M. Nykiel   
31-37
2021-01-13

The effect of cooling time on the shrinkage of blow-extruded articles
R. Sikora    T. Jachowicz   
713-719
2022-09-21

Rheometric studies on the process of polyethylene or its copolymers' crosslinking in the presence of peroxides. Part III. Effects of the concentration and type of peroxide on the process rate
M. Uhniat    S. Kudła    M. Zemlak    W. Balcerowiak   
180-186
2022-09-01

Wood-polymer composites - general characteristics and their preparation from waste materials
S. Zajchowski    J. Ryszkowska   
754-762
2022-08-18

Influence of flavanone on the stabilization of ethylene-propylene elastomer
M. Zaborski    A. Masek    E. Chrzescijanska   
558-563
2011-08-30

The properties of elastomers obtained with the use of carboxylated acrylonitrile-butadiene rubber and new crosslinking substances
M. Gaca    M. Zaborski   
31-38
2021-01-24

Properties of carboxylated acrylonitrile/butadiene rubber containing "in situ" synthesized silica fillers
M. Zaborski    J. Pietrasik   
643-649
2022-09-18

X-Ray diffuse scattering investigation of polytetrafluoroethylene surfaces
Ch. Gravalidis    S. Logothetidis   
359-364
2022-08-30

Cell-structured polymeric materials
M. Kozłowski    A. Kozłowska    S. Frąckowiak   
726-739
2010-10-30

New bio-polyol based on white mustard seed (Sinapis alba) as an alternative raw material for the polyurethane industry
J. Paciorek-Sadowska    M. Borowicz    B. Czupryński    J. Liszkowska   
694-699
2021-01-13

1 - 205 of 205 items
Łukasiewicz Research Network – Industrial Chemistry Institute
ul. Rydygiera 8,
01-793 Warszawa
email: polimeryjournal@ichp.lukasiewicz.gov.pl
tel. +48 22 633 98 04
Links:
https://ichp.lukasiewicz.gov.pl
https://lukasiewicz.gov.pl
About:
Copyright 2019 by Łukasiewicz Research Network – Industrial Chemistry Institute
OJS Support and Customization by LIBCOM
Platform & workfow by OJS/PKP